single-mostdl.php
IJAT Most Downloaded Papers, Jan. 2020
This month | Last month | Vol. No. | Title / Authors | Keywords |
---|---|---|---|---|
4 | Vol.11 No.1 (2017) |
“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples Klaus-Dieter Thoben, Stefan Wiesner, and Thorsten Wuest |
industry 4.0, smart manufacturing, cyber-physical systems, industrial internet, smart factory | |
- | Vol.14 No.1 (2020) |
Development of a Microprobing System for Side Wall Detection Based on Local Surface Interaction Force Detection So Ito, Yusuke Shima, Daichi Kato, Kimihisa Matsumoto, and Kazuhide Kamiya |
microprobe, surface interaction force, micro-stylus, micro-CMM | |
- | Vol.14 No.1 (2020) |
Compensation Method for Tool Setting Errors Based on Non-Contact On-Machine Measurement Meng Xu, Keiichi Nakamoto, and Yoshimi Takeuchi |
ultraprecision cutting, tool setting errors, on-machine measurement, multi-axis control, cutting tool | |
- | Vol.14 No.1 (2020) |
Cutting Features Between Surface Roughness in Feed Direction and Machining State of Radius End Mill Against Inclined Surfaces (In Case of Contour Machining and Five-Axis Machining with Constant Tilt Angle) Hirohisa Narita |
radius end mill, inclined machined surface, cutting conditions, contact state, Taguchi method | |
1 | Vol.13 No.3 (2019) |
Modeling Approach for Estimation of Contact and Friction Behavior of Rolling Elements in Linear Bearings Matthias Reuss, Taku Sakai, and Atsushi Matsubara |
linear bearing, rolling friction, micro contact simulation, sticktion, tribology | |
- | Vol.14 No.1 (2020) |
Mitigation of Channel Clogging in a Microfluidic Device for Capturing Circulating Tumor Cells Tomoki Konishi, Yuki Jingu, Tatsuya Yoshizawa, Masaru Irita, Toshihiro Suzuki, and Masanori Hayase |
circulating tumor cell (CTC), clogging, deoxyribonuclease (DNase), deterministic lateral displacement (DLD), DNA | |
- | Vol.10 No.1 (2016) |
Functional Texture Design and Texturing Processes Nobuyuki Moronuki |
texture, functionality, processes, top-down, bottom-up | |
- | Vol.14 No.1 (2020) |
Applicability of Diamond-Coated Tools for Ball End Milling of Sintered Tungsten Carbide Haruhiko Suwa, Soushi Sakamoto, Masafumi Nagata, Kazuhiro Tezuka, and Tetsuo Samukawa |
sintered tungsten carbide, dry cutting, diamond-coated ball end mill, cutting distance, surface roughness | |
- | Vol.14 No.1 (2020) |
Using Textured-DLC Coating to Improve the Wear Resistance of Stainless Steel Plate Under Dust-Containing Lubricant Condition Takuya Osawa, Makoto Matsuo, Yuya Eyama, Hiroshi Yamamoto, Shinji Tanaka, Masao Kikuchi, Yuki Hirata, Hiroki Akasaka, and Naoto Ohtake |
DLC, wear, friction, surface texturing, tribology | |
6 | Vol.13 No.5 (2019) |
Machining Process for a Thin-Walled Workpiece Using On-Machine Measurement of the Workpiece Compliance Takuma Umezu and Daisuke Kono |
thin-walled workpiece, compliance, on-machine measurement |
Count period : January 1-31, 2020