single-mostdl.php
IJAT Most Downloaded Papers, Oct. 2019
This month | Last month | Vol. No. | Title / Authors | Keywords |
---|---|---|---|---|
![]() |
- | Vol.13 No.2 (2019) |
Ultra Precision Surface Finishing Processes Fang-Jung Shiou and Assefa Asmare Tsegaw |
surface finishing, ball burnishing, ball polishing, vibration assisted polishing, abrasive multi-jet polishing |
![]() |
- | Vol.4 No.3 (2010) |
FE Analysis of One-Directional and Elliptical Vibration Cutting Processes Saeid Amini, Eiji Shamoto, Norikazu Suzuki, and Mohammad Javad Nategh |
vibration cutting, elliptical vibration cutting, FE analysis, cutting mechanics |
![]() |
5 | Vol.11 No.1 (2017) |
“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples Klaus-Dieter Thoben, Stefan Wiesner, and Thorsten Wuest |
industry 4.0, smart manufacturing, cyber-physical systems, industrial internet, smart factory |
![]() |
1 | Vol.13 No.5 (2019) |
Tool Orientation Angle Optimization for a Multi-Axis Robotic Milling System Leandro Batista da Silva, Hayato Yoshioka, Hidenori Shinno, and Jiang Zhu |
robotic machining, tool orientation optimization, robotic stiffness, milling |
![]() |
- | Vol.8 No.1 (2014) |
In-Process and On-Machine Measurement of Machining Accuracy for Process and Product Quality Management: A Review Yasuhiro Takaya |
in-process measurement, on-machine measurement, manufacturing metrology, machine tools, quality management |
![]() |
- | Vol.9 No.5 (2015) |
Investigation into Chemical Mechanical Polishing Mechanism of Hard-to-Process Materials Using a Commercially Available Single-Sided Polisher Michio Uneda, Keiichi Takano, Koji Koyama, Hideo Aida, and Ken-ichi Ishikawa |
chemical mechanical polishing, hard-to-process materials, removal rate, slurry flow between wafer and polishing pad during CMP, polisher vibration acceleration |
![]() |
5 | Vol.13 No.3 (2019) |
Review of Wire Arc Additive Manufacturing for 3D Metal Printing Johnnie Liew Zhong Li, Mohd Rizal Alkahari, Nor Ana Binti Rosli, Rafidah Hasan, Mohd Nizam Sudin, and Faiz Redza Ramli |
wire arc additive manufacturing (WAAM), 3D printing, additive manufacturing (AM), welding, fused deposition modeling (FDM) |
![]() |
- | Vol.11 No.6 (2017) |
Formation of Hydroxyapatite Layer on Ti–6Al–4V ELI Alloy by Fine Particle Peening Shoichi Kikuchi, Yuki Nakamura, Koichiro Nambu, and Toshikazu Akahori |
fine particle peening, titanium alloy, hydroxyapatite, fatigue, biomaterial |
![]() |
4 | Vol.12 No.5 (2018) |
Adaptive Active Vibration Control for Machine Tools with Highly Position-Dependent Dynamics Robin Kleinwort, Jonathan Platz, and Michael F. Zaeh |
chatter, vibrations, active damping, adaptive controller |
![]() |
11 | Vol.11 No.6 (2017) |
Effect of Cooling Stimulus on Collection Efficiency of Calf Chondrocytes Cultivated on Metal Surface Yuta Kurashina, Shogo Miyata, and Jun Komotori |
chondrocyte, cell proliferation, cell adherence, fine particle peening, surface modification |
Count period : October 1-31, 2019