single-au.php

IJAT Vol.12 No.1 pp. 79-86
doi: 10.20965/ijat.2018.p0079
(2018)

Review:

Nanotemplate-Guided Self-Assembly of Gold Nanoparticles and its Application to Plasmonic Bio/Chemical Sensing

Koji Sugano

Department of Mechanical Engineering, Graduate School of Engineering, Kobe University
1-1 Rokkodai-cho, Nada-ku, Kobe 657-8501, Japan

Corresponding author

Received:
June 15, 2017
Accepted:
December 1, 2017
Published:
January 5, 2018
Keywords:
self-assembly, nanoparticle, plasmon, bio/chemical sensors, surface-enhanced Raman spectroscopy
Abstract

This paper presents a high-precision and high-yield nanotemplate-guided self-assembly process for spherical gold nanoparticles. This process enables us to arrange particles in designated patterns on a substrate with nanotemplates. These particles are trapped on the nanotemplate by liquid-air interfacial force during drying of the colloidal solution. In this method, particle concentration and electrostatic interaction between particles have a considerable effect on the assembly yield. The particle concentration should be optimized based on the template pattern. A nanogap-controlled particle arrangement with a high yield is achieved by controlling the electrostatic interaction, which is accomplished by adding an electrolyte. This technique enables control of the plasmonic resonance properties of metal nanoparticles on substrates for many emerging applications. Among them, this paper discusses the application of nanotemplate-guided self-assembly to an ultrasensitive nanostructure for surface-enhanced Raman spectroscopy. The gold nanoparticle dimer, which has been reported as the highest Raman enhancing structure, is directionally arrayed on a substrate. The highest enhancement can be achieved when the direction of a particle connection for a dimer is matched to the polarization direction of incident light. A considerable enhancement can be achieved at all dimers. The fabricated structures are evaluated by focusing on the polarization angle. The 10-11-M limit of detection and a 0.05-s rapid detection are achieved by using 4,4-bipyridine molecules with single-molecule sensitivity.

Cite this article as:
K. Sugano, “Nanotemplate-Guided Self-Assembly of Gold Nanoparticles and its Application to Plasmonic Bio/Chemical Sensing,” Int. J. Automation Technol., Vol.12 No.1, pp. 79-86, 2018.
Data files:
References
  1. [1] A. Henglein, “Physicochemical properties of small metal particles in solution: “microelectrode” reactions, chemisorption, composite metal particles, and the atom-to-metal transition,” The J. of Physical Chemistry, Vol.97, No.21, pp. 5457-5471, 1993.
  2. [2] H. Nakamura, X. Li, H. Wang, M. Uehara, M. Miyazaki, H. Shimizu, and H. Maeda, “A simple method of self assembled nano-particles deposition on the micro-capillary inner walls and the reactor application for photo-catalytic and enzyme reactions,” Chemical Engineering J., Vol.101, No.1-3, pp. 261-268, 2004.
  3. [3] N. Nath and A. Chilkoti, “A colorimetric gold nanoparticle sensor to interrogate biomolecular interactions in real time on a surface,” Analytical chemistry, Vol.74, No.3, pp. 504-509, 2002.
  4. [4] C. Sonnichsen, B. M. Reinhard, J. Liphardt, and A. P. Alivisatos, “A molecular ruler based on plasmon coupling of single gold and silver nanoparticles,” Nat. Biotechnol., Vol.23, No.6, pp. 741-5, 2005.
  5. [5] V. G. Kravets, F. Schedin, R. Jalil, L. Britnell, R. V. Gorbachev, D. Ansell, B. Thackray, K. S. Novoselov, A. K. Geim, A. V. Kabashin, and A. N. Grigorenko, “Singular phase nano-optics in plasmonic metamaterials for label-free single-molecule detection,” Nat. Mater., Vol.12, No.4, pp. 304-309, 2013.
  6. [6] A. Kinkhabwala, Z. Yu, S. Fan, Y. Avlasevich, K. Müllen, and W. E. Moerner, “Large single-molecule fluorescence enhancements produced by a bowtie nanoantenna,” Nature Photonics, Vol.3, No.11, pp. 654-657, 2009.
  7. [7] A. D. McFarland and R. P. Van Duyne, “Single silver nanoparticles as real-time optical sensors with zeptomole sensitivity,” Nano letters, Vol.3, No.8, pp. 1057-1062, 2003.
  8. [8] B. Sepúlveda, P. C. Angelomé, L. M. Lechuga, and L. M. Liz-Marzán, “LSPR-based nanobiosensors,” Nano Today, Vol.4, No.3, pp. 244-251, 2009.
  9. [9] J. Kneipp, H. Kneipp, and K. Kneipp, “SERS–a single-molecule and nanoscale tool for bioanalytics,” Chem Soc Rev, Vol.37, No.5, pp. 1052-1060, 2008.
  10. [10] S. L. Kleinman, R. R. Frontiera, A. I. Henry, J. A. Dieringer, and R. P. Van Duyne, “Creating, characterizing, and controlling chemistry with SERS hot spots,” Phys Chem Chem Phys, Vol.15, No.1, pp. 21-36, 2013.
  11. [11] L. A. Lane, X. Qian, and S. Nie, “SERS Nanoparticles in Medicine: From Label-Free Detection to Spectroscopic Tagging,” Chem. Rev., Vol.115, No.19, pp. 10489-10529, 2015.
  12. [12] S. D. Hudson and G. Chumanov, “Bioanalytical applications of SERS (surface-enhanced Raman spectroscopy),” Anal. Bioanal. Chem., Vol.394, No.3, pp. 679-686, 2009.
  13. [13] R. A. Halvorson, and P. J. Vikesland, “Surface-enhanced Raman spectroscopy (SERS) for environmental analyses,” Environmental science & technology, Vol.44, No.20, pp. 7749-7755, 2010.
  14. [14] E. Petryayeva, and U. J. Krull, “Localized surface plasmon resonance: nanostructures, bioassays and biosensing – a review,” Anal. Chim. Acta., Vol.706, No.1, pp. 8-24, 2011.
  15. [15] S. C. Luo, K. Sivashanmugan, J. D. Liao, C. K. Yao, and H. C. Peng, “Nanofabricated SERS-active substrates for single-molecule to virus detection in vitro: a review,” Biosens Bioelectron, Vol.61, pp. 232-240, 2014.
  16. [16] S. A. Maier, P. G. Kik, H. A. Atwater, S. Meltzer, E. Harel, B. E. Koel, and A. A. Requicha, “Local detection of electromagnetic energy transport below the diffraction limit in metal nanoparticle plasmon waveguides,” Nat. Mater., Vol.2, No.4, pp. 229-232, 2003.
  17. [17] S. A. Maier, M. L. Brongersma, P. G. Kik, and H. A. Atwater, “Observation of near-field coupling in metal nanoparticle chains using far-field polarization spectroscopy,” Physical Review B, Vol.65, No.19, 2002.
  18. [18] A. N. Grigorenko, A. K. Geim, H. F. Gleeson, Y. Zhang, A. A. Firsov, I. Y. Khrushchev, and J. Petrovic, “Nanofabricated media with negative permeability at visible frequencies,” Nature, Vol.438, No.7066, pp. 335-338, 2005.
  19. [19] T. Atay, J.-H. Song, and A. V. Nurmikko, “Strongly interacting plasmon nanoparticle pairs: from dipole – dipole interaction to conductively coupled regime,” Nano letters, Vol.4, No.9, pp. 1627-1631, 2004.
  20. [20] P. K. Jain, W. Huang, and M. A. El-Sayed, “On the universal scaling behavior of the distance decay of plasmon coupling in metal nanoparticle pairs: a plasmon ruler equation,” Nano Letters, Vol.7, No.7, pp. 2080-2088, 2007.
  21. [21] M. Nishio, N. Moronuki, and M. Abasaki, “Fabrication of Patterned Ag and Au Inverse Opal Structures Through Repeated Self-Assembly of Fine Particles,” Int. J. of Automation Technology, Vol.8, No.5, pp. 755-760, 2014.
  22. [22] C. H. Lalander, Y. Zheng, S. Dhuey, S. Cabrini, and U. Bach, “DNA-directed self-assembly of gold nanoparticles onto nanopatterned surfaces: controlled placement of individual nanoparticles into regular arrays,” ACS nano, Vol.4, No.10, pp. 6153-6161, 2010.
  23. [23] A. M. Hung, C. M. Micheel, L. D. Bozano, L. W. Osterbur, G. M. Wallraff, and J. N. Cha, “Large-area spatially ordered arrays of gold nanoparticles directed by lithographically confined DNA origami,” Nat. Nanotechnol., Vol.5, No.2, pp. 121-126, 2010.
  24. [24] J. Zheng, Z. Zhu, H. Chen, and Z. Liu, “Nanopatterned assembling of colloidal gold nanoparticles on silicon,” Langmuir, Vol.16, No.10, pp. 4409-4412, 2000.
  25. [25] H.-X. He, H. Zhang, Q. G. Li, T. Zhu, S. Li, and Z.-F. Liu, “Fabrication of designed architectures of Au nanoparticles on solid substrate with printed self-assembled monolayers as templates,” Langmuir, Vol.16, No.8, pp. 3846-3851, 2000.
  26. [26] Y. Xia, Y. Yin, Y. Lu, and J. McLellan, “Template-assisted self-assembly of spherical colloids into complex and controllable structures,” Advanced Functional Materials, Vol.13, No.12, pp. 907-918, 2003.
  27. [27] Y. Yin, Y. Lu, B. Gates, and Y. Xia, “Template-assisted self-assembly: a practical route to complex aggregates of monodispersed colloids with well-defined sizes, shapes, and structures,” J. of the American Chemical Society, Vol.123, No.36, pp. 8718-8729, 2001.
  28. [28] T. Kraus, L. Malaquin, H. Schmid, W. Riess, N. D. Spencer, and H. Wolf, “Nanoparticle printing with single-particle resolution,” Nat. Nanotechnol., Vol.2, No.9, pp. 570-576, 2007.
  29. [29] K. Sugano, T. Ozaki, T. Tsuchiya, and O. Tabata, “Fabrication of gold nanoparticle pattern using combination of self-assembly and two-step transfer,” Sensors and Materials, Vol.23, No.5, pp. 263-275, 2011.
  30. [30] T. Ozaki, K. Sugano, T. Tsuchiya, and O. Tabata, “Versatile method of submicroparticle pattern formation using self-assembly and two-step transfer,” J. of Microelectromechanical Systems, Vol.16, No.3, pp. 746-752, 2007.
  31. [31] K. Sugano, R. Hiraoka, T. Tsuchiya, O. Tabata, M. Klaumünzer, M. Voigt, and W. Peukert, “Nanogap-controllable self-assembly of gold nanoparticles using nanotrench template,” 16th Int. Conf. on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS2011), pp. 2570-2573, 2011.
  32. [32] P. J. Schuck, D. P. Fromm, A. Sundaramurthy, G. S. Kino, and W. E. Moerner, “Improving the mismatch between light and nanoscale objects with gold bowtie nanoantennas,” Phys. Rev. Lett., Vol.94, No.1, p. 017402, 2005.
  33. [33] W. Li, P. H. Camargo, X. Lu, and Y. Xia, “Dimers of silver nanospheres: facile synthesis and their use as hot spots for surface-enhanced Raman scattering,” Nano letters, Vol.9, No.1, pp. 485-490, 2008.
  34. [34] L. Tong, H. Xu, and M. Käll, “Nanogaps for SERS applications,” MRS Bulletin, Vol.39, No.02, pp. 163-168, 2014.
  35. [35] K.-i. Yoshida, T. Itoh, H. Tamaru, V. Biju, M. Ishikawa, and Y. Ozaki, “Quantitative evaluation of electromagnetic enhancement in surface-enhanced resonance Raman scattering from plasmonic properties and morphologies of individual Ag nanostructures,” Physical Review B, Vol.81, No.11, 2010.
  36. [36] K. Sugano, K. Suekuni, T. Takeshita, K. Aiba, and Y. Isono, “Surface-enhanced Raman spectroscopy using linearly arranged gold nanoparticles embedded in nanochannels,” Japanese J. of Applied Physics, Vol.54, No.6S1, 06FL03, 2015.
  37. [37] K. Sugano, K. Aiba, K. Ikegami, and Y. Isono, “Single-molecule surface-enhanced Raman spectroscopy of 4,4′-bipyridine on a prefabricated substrate with directionally arrayed gold nanoparticle dimers,” Japanese J. of Applied Physics, Vol.56, No.6S1, 06GK01, 2017.
  38. [38] K. Sugano, K. Ikegami, and Y. Isono, “Characterization method for relative Raman enhancement for surface-enhanced Raman spectroscopy using gold nanoparticle dimer array,” Japanese J. of Applied Physics, Vol.56, No.6S1, 06GK03, 2017.
  39. [39] T. Takeshita, K. Suekuni, K. Aiba, K. Sugano, and Y. Isono, “Surface-Enhanced Raman Spectroscopy Analysis Device with Gold Nanoparticle Arranged Nanochannel,” Electronics and Communications in Japan, Vol.100, No.4, pp. 33-41, 2017.
  40. [40] K. Sugano, D. Matsui, T. Tsuchiya, and O. Tabata, “Ultrasensitive surface-enhanced Raman spectroscopy using directionally arrayed gold nanoparticle dimers,” 28th IEEE Int. Conf. on Micro Electro Mechanical Systems (MEMS2015), pp. 608-611, 2015.
  41. [41] K. Ikegami, K. Sugano, and Y. Isono, “Surface-enhanced Raman spectroscopy analysis of DNA bases using arrayed and single dimer of gold nanoparticle,” IEEE Int. Conf. on Micro Electro Mechanical Systems (MEMS2017), pp. 408-411, 2017.
  42. [42] K. Sugano, Y. Uchida, O. Ichihashi, H. Yamada, T. Tsuchiya, and O. Tabata, “Mixing speed-controlled gold nanoparticle synthesis with pulsed mixing microfluidic system,” Microfluidics and Nanofluidics, Vol.9, No.6, pp. 1165-1174, 2010.
  43. [43] K. Sugano, A. Nakata, T. Tsuchiya, and O. Tabata, “High-speed pulsed mixing in a short distance with high-frequency switching of pumping from three inlets,” J. of Micromechanics and Microengineering, Vol.25, No.8, p. 084003, 2015.
  44. [44] S. Kumar, K. Gandhi, and R. Kumar, “Modeling of formation of gold nanoparticles by citrate method,” Industrial & Engineering Chemistry Research, Vol.46, No.10, pp. 3128-3136, 2007.
  45. [45] C. Munro, W. Smith, M. Garner, J. Clarkson, and P. White, “Characterization of the surface of a citrate-reduced colloid optimized for use as a substrate for surface-enhanced resonance Raman scattering,” Langmuir, Vol.11, No.10, pp. 3712-3720, 1995.
  46. [46] M. Giersig and P. Mulvaney, “Preparation of ordered colloid monolayers by electrophoretic deposition,” Langmuir, Vol.9, No.12, pp. 3408-3413, 1993.
  47. [47] T. Tsuchiya, Y. Kogita, A. Taniyama, Y. Hirai, K. Sugano, and O. Tabata, “Time-Resolved Micro-Raman Stress Spectroscopy for Single-Crystal Silicon Resonators Using a MEMS Optical Chopper,” J. of Microelectromechanical Systems, Vol.25, No.1, pp. 188-196, 2016.
  48. [48] M. Suzuki, Y. Niidome, and S. Yamada, “Adsorption characteristics of 4,4′-bipyridine molecules on gold nanosphere films studied by surface-enhanced Raman scattering,” Thin Solid Films, Vol.496, No.2, pp. 740-747, 2006.
  49. [49] E. C. Le Ru, E. Blackie, M. Meyer, and P. G. Etchegoin, “Surface Enhanced Raman Scattering Enhancement Factors: A Comprehensive Study,” The J. of Physical Chemistry C, Vol.111, No.37, pp. 13794-13803, 2007.
  50. [50] E. C. Le Ru and P. G. Etchegoin, “Quantifying SERS enhancements,” MRS Bulletin, Vol.38, No.08, pp. 631-640, 2013.
  51. [51] A. Campion and P. Kambhampati, “Surface-enhanced Raman scattering,” Chemical Society Reviews, Vol.27, No.4, pp. 241-250, 1998.
  52. [52] A. Campion, J. Ivanecky III, C. Child, and M. Foster, “On the mechanism of chemical enhancement in surface-enhanced Raman scattering,” J. of the American Chemical Society, Vol.117, No.47, pp. 11807-11808, 1995.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Apr. 19, 2024