Top > IJAT > High Precision Tool Cutting Edge Monitoring Using Laser Diffra ...

single-au.php

IJAT Vol.6 No.2 pp. 163-167
doi: 10.20965/ijat.2012.p0163
(2012)

Paper:

Views over last 60 days: 922

High Precision Tool Cutting Edge Monitoring Using Laser Diffraction for On-Machine Measurement

Panart Khajornrungruang*, Keiichi Kimura*,
Yasuhiro Takaya**, and Keisuke Suzuki*

*School of Computer Science and Systems Engineering, Kyushu Institute of Technology, 680-4 Kawazu, Iizuka-shi, Fukuoka 820-8502, Japan

**Department of Mechanical Engineering, Osaka University, 2-1 Yamadaoka, Suita-shi, Osaka 565-0871, Japan

Received:
September 27, 2011
Accepted:
January 25, 2012
Published:
March 5, 2012
Creative Commons License
Keywords:
tool, cutting edge, laser, diffraction, onmachine, measurement
Abstract
The Far-field laser diffraction is proposed for measuring tool cutting-edges geometry with sub-micrometer precision. In particular, by eliciting an optical diffraction phenomenon, the cutting-edge of the tool can be monitored without a diffraction limit. This method can also be applied for on-machine measurements because of the simplicity and long working distance of the optical system; high precision can be achieved by using a laser light and there is no need for a vacuum environment. In this study, an on-machine tool measurement device using laser diffraction was developed to experimentally measure tool displacements of order of hundreds of nanometers; a piezo-drive stage was also used. Measurements of the cutting-edge curve of a ball endmill and a tool cutting-edge tolerance were also experimentally monitored.
Cite this article as:
P. Khajornrungruang, K. Kimura, Y. Takaya, and K. Suzuki, “High Precision Tool Cutting Edge Monitoring Using Laser Diffraction for On-Machine Measurement,” Int. J. Automation Technol., Vol.6 No.2, pp. 163-167, 2012.
Data files:
References
  1. [1] T. Pfeifer and L. Wiegers, “Reliable tool wear monitoring by optimized image and illumination control in machine vision,” Measurement, Vol.28, pp. 209-218, 2000.
  2. [2] H. S. Lim, S. M. Son, Y. S. Wong, and M. Rhaman, “Development and evaluation of an on-machine optical measurement device,” Int. J. of Machine Tools & Manufacture, Vol.47, pp. 1556-1562, 2007.
  3. [3] H. H. Shahabi and M.M. Ratnam, “On-line monitoring of tool wear in turning operation in the presence of tool misalighnment,” Int. J. Adv. Manuf. Technol., Vol.38, pp. 718-727, 2008.
  4. [4] P. Khajornrungruang et al., “On-Machine Cutting Edge Profile Measurement for Micro Milling Tool,” Trans. of the Japan Society of Mechanical Engineers, Series C, Vol.70, pp. 3556-3563, 2004.
  5. [5] E. Hecht, Optics 4th (Ed.), Addison Wesley, 2001.

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Apr. 19, 2024