single-au.php

IJAT Vol.4 No.5 pp. 439-446
doi: 10.20965/ijat.2010.p0439
(2010)

Development Report:

Optimization of Motion Control in High-Speed Servo Press Line

Hideki Taoka, Hiroyuki Nobuta, Hideo Meguri,
and Yoshihiro Kageyama

Honda Engineering Co.,Ltd., 6-1 Hagadai, Haga-machi, Haga-gun, Tochigi 321-3395, Japan

Received:
April 12, 2010
Accepted:
May 12, 2010
Published:
September 5, 2010
Keywords:
servo press line, high speed transfer, motion control, optimization, high productivity
Abstract

Honda Engineering Co., Ltd. developed an innovative servo press line that achieves the world’s highest level of productivity in producing deep-drawn automotive body panels. The innovative press production system was made so that the press forming conditions and panel transfer motions are adjusted to the dies very accurately for each part to be produced. The servo press line is planned to be expanded to Honda’s production plants on a global scale while allowing further evolution.

Cite this article as:
H. Taoka, H. Nobuta, H. Meguri, and <. Kageyama, “Optimization of Motion Control in High-Speed Servo Press Line,” Int. J. Automation Technol., Vol.4, No.5, pp. 439-446, 2010.
Data files:
References
  1. [1] H. Taoka, H. Meguri, M. Azuma, H. Ikehara, M. Hashimoto, and Y. Kono, “SOKEIZAI,” Vol.50, No.12, pp. 33-38, 2009.
  2. [2] Y. Kageyama, “New Developments in automotive productions by high-speed servo press lines,” Forming in Car Body Engineering 2009, Automotive Circle Int. Conf.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, IE9,10,11, Opera.

Last updated on Nov. 18, 2019