single-mostdl.php
IJAT Most Downloaded Papers, Dec. 2024
| This month | Last month | Vol. No. | Title / Authors | Keywords |
|---|---|---|---|---|
 |
4 | Vol.16 No.4 (2022) |
Magnetic Levitation Technology for Precision Motion Systems: A Review and Future Perspectives Lei Zhou and Jingjie Wu |
magnetic levitation, mechatronics, actuators, precision motion systems, precision positioning |
 |
1 | Vol.11 No.1 (2017) |
“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples Klaus-Dieter Thoben, Stefan Wiesner, and Thorsten Wuest |
industry 4.0, smart manufacturing, cyber-physical systems, industrial internet, smart factory |
 |
4 | Vol.18 No.6 (2024) |
Exploring Differing Perspectives on Sustainability and Corresponding Strategies in German Automotive Companies Antonio Isopp, Marlon Philipp, Johannes Weyer, and Aaron Zilt |
sociotechnical transition, automotive industry, circular economy, governance, sustainability |
 |
2 | Vol.18 No.6 (2024) |
Cutting Tool Monitoring Technology Using Wireless Acoustic Emission Sensor Mizuki Uematsu, Kazuya Kato, Kota Watanabe, Tomoya Watanobe, and Wataru Natsu |
end mill, acoustic emission sensor, chipping of cutting edge, wireless technology |
 |
10 | Vol.18 No.6 (2024) |
Time Framing and SDGs: Can Imaginary Future Generations Alter People’s Perceptions and Attitudes? Michinori Uwasu, Masashi Kuroda, Yukari Fuchigami, and Keishiro Hara |
SDGs, imaginary future generation, perception, attitude |
|
6 | Vol.18 No.4 (2024) |
Advanced Sensing and Machine Learning Technologies for Intelligent Measurement in Smart and Precision Manufacturing Ryo Sato, Kuangyi Li, Masaki Michihata, Satoru Takahashi, and Wei Gao |
intelligent measurement, sensing, machine learning, dimensional metrology, process monitoring |
|
5 | Vol.13 No.3 (2019) |
Review of Wire Arc Additive Manufacturing for 3D Metal Printing Johnnie Liew Zhong Li, Mohd Rizal Alkahari, Nor Ana Binti Rosli, Rafidah Hasan, Mohd Nizam Sudin, and Faiz Redza Ramli |
wire arc additive manufacturing (WAAM), 3D printing, additive manufacturing (AM), welding, fused deposition modeling (FDM) |
 |
11 | Vol.18 No.6 (2024) |
Analyzing Factors Influencing Customer Satisfaction with Organic Coffee in E-Commerce Yuna Seo |
organic coffee, E-commerce, satisfaction, Japan |
|
9 | Vol.5 No.6 (2011) |
Gyroscopic Stabilization of a Self-Balancing Robot Bicycle Pom Yuan Lam and Tan Kian Sin |
bicycle, Control Moment Gyro (CMG), realtime, control and FPGA |
 |
- | Vol.18 No.4 (2024) |
Scrap Float Detection in a Blanking Die Set with Multiple Retrofit Accelerometers Using the Mahalanobis–Taguchi System Takahiro Ohashi |
scrap float detection, stamping, dies, Mahalanobis–Taguchi system, machine learning |
 |
18 | Vol.18 No.5 (2024) |
Design and Analysis of Rehabilitation Evaluation System for Finger Rehabilitation Robot Guangda Lu, Xinlin Liu, Qiuyue Zhang, Zhuangzhuang Zhao, Runze Li, and Zheng Li |
rehabilitation assessment, rehabilitation robot, hand dysfunction |
|
13 | Vol.18 No.5 (2024) |
Topological Delaunay Graph for Efficient 3D Binary Image Analysis Shin Yoshizawa, Takashi Michikawa, and Hideo Yokota |
persistent homology, persistence diagram, Rips complex, topological graph, Voronoi diagram |
 |
20 | Vol.18 No.5 (2024) |
Robustness of Structure from Motion Accuracy/Precision Against the Non-Optimality in Analysis Settings: Case Study in Constant-Pitch Flight Design Truc Thanh Ho, Ariyo Kanno, Yuji Matsuoka, Masahiko Sekine, Tsuyoshi Imai, Koichi Yamamoto, and Takaya Higuchi |
structure from motion (SfM), UAV-based photogrammetry, SfM analysis setting, flight design, robustness of SfM accuracy/precision |
 |
3 | Vol.18 No.6 (2024) |
Robotics and Automation Roadmap: Thailand Perspectives Nathasit Gerdsri, Phoemsak Suksiri, Tunyawat Somjaitaweeporn, and Temsiri Sapsaman |
robotics and automation, technology roadmap, roadmapping, Thailand, Industry 4.0 |
|
19 | Vol.18 No.5 (2024) |
Analysis of the Relationship Between Process Parameters and Microhardness for the Finishing Process by Wire Arc Additive Manufacturing Combined with the FSB Tool of Austenitic Stainless Steel 316L Teerayut Cordkaew, Jun’ichi Kaneko, and Takeyuki Abe |
wire arc additive manufacturing, directed energy deposition, friction stir burnishing, Taguchi, microhardness |
|
19 | Vol.18 No.2 (2024) |
Ultrasonic-Assisted Grinding of Microholes Using Ultrasmall-Diameter Cemented WC Tools Kai Egashira, Ryota Honda, Keishi Yamaguchi, and Minoru Ota |
grinding, microhole, ultrasmall-diameter tool, ultrasonic assistance, cemented WC |
Count period : December 1-31, 2024