IJAT Most Downloaded Papers, Jul. 2024

single-mostdl.php

Last month	Vol. No.	Title / Authors	Keywords
-	Vol.18 No.4 (2024)	Advanced Sensing and Machine Learning Technologies for Intelligent Measurement in Smart and Precision Manufacturing Ryo Sato, Kuangyi Li, Masaki Michihata, Satoru Takahashi, and Wei Gao	intelligent measurement, sensing, machine learning, dimensional metrology, process monitoring
-	Vol.18 No.4 (2024)	Initial Wear of Fixed Diamond Wire Tool –Effect of Slurry Assisted Slicing on Machining Mechanism— Shinya Moriyama, Takanori Yazawa, Tatsuki Otsubo, and Koichiro Harada	wire saw, sapphire, electrodeposition wire tool, CeO₂ particles, nickel plating
6	Vol.16 No.4 (2022)	Magnetic Levitation Technology for Precision Motion Systems: A Review and Future Perspectives Lei Zhou and Jingjie Wu	magnetic levitation, mechatronics, actuators, precision motion systems, precision positioning
1	Vol.11 No.1 (2017)	“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples Klaus-Dieter Thoben, Stefan Wiesner, and Thorsten Wuest	industry 4.0, smart manufacturing, cyber-physical systems, industrial internet, smart factory
-	Vol.18 No.4 (2024)	Influence of Pilot Hole and Work Material Hardness on Thread Milling with a Wireless Holder System Shota Matsui, Nobutoshi Ozaki, Toshiki Hirogaki, Eiichi Aoyama, and Ryo Matsuda	thread mill, wireless monitoring holder, cutting force, helical interpolation, machining center
-	Vol.18 No.4 (2024)	Continuous Representation of Machining Processes Using 4-Dimensional Geometric Models –Cutter-Workpiece Engagement Analysis and Processing Surface Estimation in Spatio-Temporal Space— Tong Zhang, Masahiko Onosato, and Fumiki Tanaka	CAD/CAM, milling process simulation, 4D geometric model, cutter-workpiece engagement
-	Vol.18 No.4 (2024)	Effect of Different Feed Rates on Chip Evacuation in Drilling of Lead-Free Brass with a Small-Diameter Drill Tadaaki Naruki, Kenichi Suzuki, Hideharu Kato, Shigehiko Sakamoto, Masahiro Seto, Jin Katayama, and Takayuki Oka	lead-free brass, small-diameter drill, chip evacuation, feed rate
2	Vol.18 No.2 (2024)	High-Efficiency Polishing of Polymer Surface Using Catalyst-Referred Etching Daisetsu Toh, Kodai Takeda, Kiyoto Kayao, Yuji Ohkubo, Kazuto Yamauchi, and Yasuhisa Sano	polymer polishing, catalyst-referred etching (CARE), polycarbonate (PC), polymethyl methacrylate (PMMA), fluorinated ethylene propylene (FEP)
9	Vol.18 No.3 (2024)	Milling of TiBbm₂ Particle Reinforced High-Modulus Steel Hideharu Kato, Kazuya Matsumoto, Yukio Ito, Shigehiko Sakamoto, and Hitoshi Sumiya	TiB₂ particle, high-Young’s-modulus steel, binderless CBN, tool life, cutting temperature
11	Vol.17 No.6 (2023)	Estimation of Hardness and Residual Stress on End-Milled Surfaces Using Linear Regression Model Hideyuki Fujii, Yukio Takahashi, Jiei Hodohara, Norikazu Suzuki, Yuki Yamada, Yasuhiro Imabeppu, and Naruhiro Irino	surface integrity, machined surface hardness, residual stress, tool wear, edge force coefficient
8	Vol.18 No.3 (2024)	Improving Machined Accuracy Under a Constant Feed Speed Vector at the End-Milling Point by Estimating Machining Force in Tool Approach Takamaru Suzuki, Toshiki Hirogaki, and Eiichi Aoyama	five-axis machining center, synchronous motion, machined shape error, wireless IoT tool holder, machining force
7	Vol.17 No.5 (2023)	Effect of Vibration Behavior in Low-Frequency Vibration Cutting on Surface Properties of Workpiece Hiroyuki Kodama, Shota Matsuno, Naoyuki Shibata, and Kazuhito Ohashi	low-frequency vibration cutting, vibration behavior, surface roughness, cross-sectional curve
-	Vol.18 No.4 (2024)	Scrap Float Detection in a Blanking Die Set with Multiple Retrofit Accelerometers Using the Mahalanobis–Taguchi System Takahiro Ohashi	scrap float detection, stamping, dies, Mahalanobis–Taguchi system, machine learning
6	Vol.13 No.3 (2019)	Review of Wire Arc Additive Manufacturing for 3D Metal Printing Johnnie Liew Zhong Li, Mohd Rizal Alkahari, Nor Ana Binti Rosli, Rafidah Hasan, Mohd Nizam Sudin, and Faiz Redza Ramli	wire arc additive manufacturing (WAAM), 3D printing, additive manufacturing (AM), welding, fused deposition modeling (FDM)

Count period : July 1-31, 2024