single-mostdl.php

IJAT Most Downloaded Papers, May. 2024

This month Last month Vol. No. Title / Authors Keywords
No.1 - Vol.18
No.3
(2024)
Practical Method for Identifying Model Parameters for Machining Error Simulation in End Milling Through Sensor-Less Monitoring and On-Machine Measurement
Kazuki Kaneko, Arisa Kudo, Takanori Waizumi, Jun Shimizu, Libo Zhou, Hirotaka Ojima, and Teppei Onuki
end milling, machining error simulation, parameter identification, tool stiffness, on-machine measurement
No.2 - Vol.18
No.3
(2024)
Improving Machined Accuracy Under a Constant Feed Speed Vector at the End-Milling Point by Estimating Machining Force in Tool Approach
Takamaru Suzuki, Toshiki Hirogaki, and Eiichi Aoyama
five-axis machining center, synchronous motion, machined shape error, wireless IoT tool holder, machining force
No.2 - Vol.18
No.3
(2024)
Influence of Reverse Finishing on Characteristics of Drilling Surface
Yuzuha Ochi, Masatoshi Usui, and Hiroyuki Sasahara
aluminum alloy, Bauschinger effect, drilling, reverse finishing
No.3 1 Vol.11
No.1
(2017)
“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples
Klaus-Dieter Thoben, Stefan Wiesner, and Thorsten Wuest
industry 4.0, smart manufacturing, cyber-physical systems, industrial internet, smart factory
No.4 2 Vol.18
No.2
(2024)
High-Efficiency Polishing of Polymer Surface Using Catalyst-Referred Etching
Daisetsu Toh, Kodai Takeda, Kiyoto Kayao, Yuji Ohkubo, Kazuto Yamauchi, and Yasuhisa Sano
polymer polishing, catalyst-referred etching (CARE), polycarbonate (PC), polymethyl methacrylate (PMMA), fluorinated ethylene propylene (FEP)
No.5 - Vol.18
No.3
(2024)
Prediction of Surface Roughness Components in Turning with Single Point Tool—Measurement of Tool Edge Contour and Prediction of its Position During Cutting—
Ryo Sakamoto, Ryutaro Tanaka, Isaí Espinoza Torres, Israel Martínez Ramírez, Katsuhiko Sekiya, and Keiji Yamada
turning, surface roughness, tool wear, lubricant, over cutting
No.6 8 Vol.18
No.1
(2024)
On-Machine Calibration of Pitch Deviations of a Linear Scale Grating by Using a Differential Angle Sensor
Jiucheng Wu, Yifang Hong, Dong Wook Shin, Ryo Sato, Lue Quan, Hiraku Matsukuma, and Wei Gao
on-machine, linear scale grating, laser autocollimation, pitch deviation measurement
No.6 10 Vol.16
No.6
(2022)
An Analysis of Practices and Challenges for Plastic Recycling Industry in Malaysia
Ming Hui Tan, Meng Soon Chiong, Yoon-Young Chun, Kenichiro Tsukahara, and Kiyotaka Tahara
solid waste management, plastic waste, recycling, material flow analysis, Malaysia
No.6 8 Vol.16
No.4
(2022)
Magnetic Levitation Technology for Precision Motion Systems: A Review and Future Perspectives
Lei Zhou and Jingjie Wu
magnetic levitation, mechatronics, actuators, precision motion systems, precision positioning
No.7 - Vol.18
No.3
(2024)
Inner Modulation Controlled Process for Suppression of Chatter Vibration in Double Inserts Turning
Toshifumi Atsuta, Hidenori Yoshimura, and Takashi Matsumura
chatter vibration, turning, double inserts cutting, phase difference, low-rigid workpiece
No.7 - Vol.18
No.3
(2024)
Electrical Discharge-Assisted Turning for UD CFRP Under Low Voltage Condition
Hidetake Tanaka and Ryuta Kuboshima
CFRP, electrical discharge machining, uncut fiber, NC lathe
No.7 12 Vol.18
No.1
(2024)
Machine-Learning-Based Model Parameter Identification for Cutting Force Estimation
Junichi Kouguchi, Shingo Tajima, and Hayato Yoshioka
milling, cutting force, machine learning, model-based monitoring, in-process monitoring
No.8 2 Vol.13
No.3
(2019)
Review of Wire Arc Additive Manufacturing for 3D Metal Printing
Johnnie Liew Zhong Li, Mohd Rizal Alkahari, Nor Ana Binti Rosli, Rafidah Hasan, Mohd Nizam Sudin, and Faiz Redza Ramli
wire arc additive manufacturing (WAAM), 3D printing, additive manufacturing (AM), welding, fused deposition modeling (FDM)
No.8 6 Vol.6
No.2
(2012)
Indirect Measurement of Volumetric Accuracy for Three-Axis and Five-Axis Machine Tools: A Review
Soichi Ibaraki and Wolfgang Knapp
volumetric accuracy, indirect measurement, machine tools, kinematic model
No.9 10 Vol.18
No.1
(2024)
A Discrete-Event Simulation Study of Multi-Objective Sales and Operation Planning Under Demand Uncertainty: A Case of the Ethiopian Automotive Industry
Yigedeb Abay, Toshiya Kaihara, and Daisuke Kokuryo
sales and operation planning, supply chain planning, multi-objective, discrete-event simulation, Ethiopian automotive industry
No.9 14 Vol.17
No.3
(2023)
Proposal of Simulation-Based Surgical Navigation and Development of Laparoscopic Surgical Simulator that Reflects Motion of Surgical Instruments in Real-World
Sayaka Shibuya, Noriyuki Shido, Ryosuke Shirai, Kazuya Sase, Koki Ebina, Xiaoshuai Chen, Teppei Tsujita, Shunsuke Komizunai, Taku Senoo, and Atsushi Konno
real-time digital-twin, laparoscopic surgery, finite element method, collision detection, surgical navigation
No.9 - Vol.15
No.5
(2021)
Design Concept and Structural Configuration of Magnetic Levitation Stage with Z-Assist System
Motohiro Takahashi
ultra-precision positioning, magnetic levitation
No.10 18 Vol.15
No.2
(2021)
Design of an Intelligent Greenhouse Remote Control System Based on a Fuzzy Neural Network
Yajuan Jia
fuzzy neural network, greenhouse, remote control, temperature control

Count period : May 1-31, 2024

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jun. 03, 2024