single-mostdl.php

IJAT Most Downloaded Papers, Feb. 2024

This month Last month Vol. No. Title / Authors Keywords
No.1 2 Vol.11
No.1
(2017)
“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples
Klaus-Dieter Thoben, Stefan Wiesner, and Thorsten Wuest
industry 4.0, smart manufacturing, cyber-physical systems, industrial internet, smart factory
No.2 1 Vol.18
No.1
(2024)
Experimental In-Situ Observatory on Brownian Motion Behavior of 105 nm Sized Silica Particles During Chemical Mechanical Polishing of 4H-SiC by an Evanescent Field
Thitipat Permpatdechakul, Panart Khajornrungruang, Keisuke Suzuki, Aran Blattler, and Jiraphan Inthiam
nano-particle, polishing phenomena, wet process, evanescent wave, silicon carbide (SiC)
No.2 14 Vol.13
No.3
(2019)
Review of Wire Arc Additive Manufacturing for 3D Metal Printing
Johnnie Liew Zhong Li, Mohd Rizal Alkahari, Nor Ana Binti Rosli, Rafidah Hasan, Mohd Nizam Sudin, and Faiz Redza Ramli
wire arc additive manufacturing (WAAM), 3D printing, additive manufacturing (AM), welding, fused deposition modeling (FDM)
No.3 3 Vol.18
No.1
(2024)
Machine-Learning-Based Model Parameter Identification for Cutting Force Estimation
Junichi Kouguchi, Shingo Tajima, and Hayato Yoshioka
milling, cutting force, machine learning, model-based monitoring, in-process monitoring
No.4 8 Vol.18
No.1
(2024)
Repetition Frequency Control of a Mid-Infrared Ultrashort Pulse Laser
Hiraku Matsukuma, Masashi Nagaoka, Hisashi Hirose, Ryo Sato, Yuki Shimizu, and Wei Gao
mid-infrared laser, mode-locked laser, repetition frequency, phase-locked loop
No.4 9 Vol.16
No.4
(2022)
Magnetic Levitation Technology for Precision Motion Systems: A Review and Future Perspectives
Lei Zhou and Jingjie Wu
magnetic levitation, mechatronics, actuators, precision motion systems, precision positioning
No.5 11 Vol.18
No.1
(2024)
A Discrete-Event Simulation Study of Multi-Objective Sales and Operation Planning Under Demand Uncertainty: A Case of the Ethiopian Automotive Industry
Yigedeb Abay, Toshiya Kaihara, and Daisuke Kokuryo
sales and operation planning, supply chain planning, multi-objective, discrete-event simulation, Ethiopian automotive industry
No.5 22 Vol.16
No.6
(2022)
Variability Specific to a Closed-Loop Supply Chain with Product Deterioration
Jundai Koketsu, Aya Ishigaki, Hiromasa Ijuin, and Tetsuo Yamada
supply chain management, remanufacturing, qualitative uncertainty, simulation
No.6 8 Vol.18
No.1
(2024)
Fundamental Study of Press Molding Method for CFRP Preform Using a 3D Printer
Hidetake Tanaka, Yuuki Nishimura, Tatsuki Ikari, and Emir Yilmaz
CFRP, preform, 3D printer, press molding, CAM
No.6 12 Vol.18
No.1
(2024)
Phase Retrieval Algorithm for Surface Topography Measurement Using Multi-Wavelength Scattering Spectroscopy
Satoshi Itakura, Tsutomu Uenohara, Yasuhiro Mizutani, and Yasuhiro Takaya
laser inverse scattering method, surface topography measurement
No.6 4 Vol.18
No.1
(2024)
Diameter Measurement for Micro-Spheres via Coherent Scanning Interferometry with Reference to Gauge Block
Masaki Michihata, Shotaro Kadoya, and Satoru Takahashi
micro-sphere, gauge block, coherent scanning interferometry, comparator principle, measurement uncertainty
No.6 4 Vol.18
No.1
(2024)
On-Machine Calibration of Pitch Deviations of a Linear Scale Grating by Using a Differential Angle Sensor
Jiucheng Wu, Yifang Hong, Dong Wook Shin, Ryo Sato, Lue Quan, Hiraku Matsukuma, and Wei Gao
on-machine, linear scale grating, laser autocollimation, pitch deviation measurement
No.7 7 Vol.17
No.3
(2023)
Digital Twin of Experience for Human–Robot Collaboration Through Virtual Reality
Tetsunari Inamura
digital twin, virtual reality, human–robot interaction, behavior change
No.7 19 Vol.5
No.4
(2011)
Tip Growing Actuator with the Hose-Like Structure Aiming for Inspection on Narrow Terrain
Hideyuki Tsukagoshi, Nobuyuki Arai, Ichiro Kiryu, and Ato Kitagawa
pneumatic actuator, plant mimetic actuator, search and rescue robot
No.8 10 Vol.18
No.1
(2024)
Measurement of a Freeform Surface by Dragging Three Point Method Along with a Circular Path
Kento Tokuchi, Mikio Kurita, and Keisuke Takahashi
freeform, measurement, dragging three-point method, circular path, telescope
No.8 7 Vol.18
No.1
(2024)
A Technique for Estimating the Pitch of Interference Fringe Patterns for Pattern Exposure in a Non-Orthogonal One-Axis Lloyd’s Mirror Interferometer
Nozomu Takahiro and Yuki Shimizu
laser interference lithography, Lloyd’s mirror interferometer, diffraction grating
No.8 16 Vol.17
No.5
(2023)
Effect of Vibration Behavior in Low-Frequency Vibration Cutting on Surface Properties of Workpiece
Hiroyuki Kodama, Shota Matsuno, Naoyuki Shibata, and Kazuhito Ohashi
low-frequency vibration cutting, vibration behavior, surface roughness, cross-sectional curve
No.8 17 Vol.17
No.3
(2023)
Inflatable Humanoid Cybernetic Avatar for Physical Human–Robot Interaction
Ryuma Niiyama, Masahiro Ikeda, and Young Ah Seong
soft robotics, inflatable robot, cybernetic avatar, physical human–robot interaction (pHRI)
No.8 16 Vol.17
No.3
(2023)
Estimating Whole-Body Walking Motion from Inertial Measurement Units at Wrist and Heels Using Deep Learning
Yuji Kumano, Suguru Kanoga, Masataka Yamamoto, Hiroshi Takemura, and Mitsunori Tada
deep learning, joint angle estimation, IMU, long short-term memory layer, motion capture
No.8 22 Vol.16
No.1
(2022)
ELID Mirror Surface Grinding for Concave Molds by Conductive Elastic Wheel Containing Carbon Black
Atsushi Ezura, Katsufumi Inazawa, Kazuhiro Omori, Yoshihiro Uehara, Nobuhide Itoh, and Hitoshi Ohmori
ELID grinding, elastic wheel, surface roughness, form accuracy, mirror finish
No.8 19 Vol.15
No.5
(2021)
Experienced Challenges When Implementing Collaborative Robot Applications in Assembly Operations
Staffan Karl Lennart Andersson, Anna Granlund, Jessica Bruch, and Mikael Hedelind
CoBot, assembly, Industry 4.0, industrial robot, case study
No.8 20 Vol.5
No.4
(2011)
Quantitative Performance Analysis of Exoskeleton Augmenting Devices - Muscle Suit - for Manual Worker
Yoshiki Muramatsu, Hiroyuki Kobayashi, Yutaka Sato, He Jiaou, Takuya Hashimoto, and Hiroshi Kobayashi
muscle suit, wearable robot, exoskeleton, McKibben artificial muscle, quantitative performance evaluation
No.8 22 Vol.1
No.2
(2007)
Development of Die Mold Processing Machine with Multi-Spindles and Axes
Akihiro Kitamura, Ichiro Takahashi, Masahiro Anzai, and Yoshimi Takeuchi
machine tool, multi-spindle and axes, metal mold manufacturing, tool path, performance evaluation
No.9 6 Vol.18
No.1
(2024)
Shock Wave Detection for In-Process Depth Measurement in Laser Ablation Using a Photonic Nanojet
Tsutomu Uenohara, Makoto Yasuda, Yasuhiro Mizutani, and Yasuhiro Takaya
laser ablation, in-process measurement, shock wave, photonic nanojet
No.9 13 Vol.17
No.5
(2023)
Temperature Control Performance of a Built-In Motor Spindle by Developed Temperature Feedback Control System
Shumon Wakiya, Ryota Ishida, Jumpei Kusuyama, and Yohichi Nakao
precise temperature feedback control system, built-in motor spindle, thermal stability, machine tools, cooling system
No.9 21 Vol.16
No.3
(2022)
Performance Evaluation of Low-Cost Vibration Sensors in Industrial IoT Applications
Ali Iqbal, Naeem S. Mian, Andrew Longstaff, and Simon Fletcher
Industrial Internet of Things, precision manufacturing, measuring instruments, calibration, Industry 4.0
No.9 19 Vol.14
No.6
(2020)
Defining Requirements on Technology Systems Assessment from Life Cycle Perspectives: Cases on Recycling of Photovoltaic and Secondary Batteries
Yasunori Kikuchi, Aya Heiho, Yi Dou, Izuru Suwa, I-Ching Chen, Yasuhiro Fukushima, and Chiharu Tokoro
bibliometric analysis, requirement definition, life cycle assessment
No.9 - Vol.13
No.3
(2019)
MPCC-Based Set Point Optimisation for Machine Tools
Titus Haas, Sascha Weikert, and Konrad Wegener
set point optimisation, machine tools, CNC, minimum-time trajectory, model predictive contouring control
No.10 20 Vol.16
No.2
(2022)
Sensor-Integrated Tool for Self-Optimizing Single-Lip Deep Hole Drilling
Robert Wegert, Mohammad Alaa Alhamede, Vinzenz Guski, Siegfried Schmauder, and Hans-Christian Möhring
deep hole drilling, temperature, vibrations, sensors, microcontroller
No.10 17 Vol.8
No.3
(2014)
Hand Modeling and Motion Reconstruction for Individuals
Yui Endo, Mitsunori Tada, and Masaaki Mochimaru
digital human modeling, digital hand model, motion capture, joint center estimation, motion reconstruction
No.10 8 Vol.6
No.2
(2012)
Indirect Measurement of Volumetric Accuracy for Three-Axis and Five-Axis Machine Tools: A Review
Soichi Ibaraki and Wolfgang Knapp
volumetric accuracy, indirect measurement, machine tools, kinematic model

Count period : February 1-29, 2024

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Nov. 04, 2024