IJAT Most Downloaded Papers, Oct. 2023

single-mostdl.php

Last month	Vol. No.	Title / Authors	Keywords
15	Vol.17 No.3 (2023)	Inflatable Humanoid Cybernetic Avatar for Physical Human–Robot Interaction Ryuma Niiyama, Masahiro Ikeda, and Young Ah Seong	soft robotics, inflatable robot, cybernetic avatar, physical human–robot interaction (pHRI)
10	Vol.16 No.4 (2022)	Magnetic Levitation Technology for Precision Motion Systems: A Review and Future Perspectives Lei Zhou and Jingjie Wu	magnetic levitation, mechatronics, actuators, precision motion systems, precision positioning
1	Vol.11 No.1 (2017)	“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples Klaus-Dieter Thoben, Stefan Wiesner, and Thorsten Wuest	industry 4.0, smart manufacturing, cyber-physical systems, industrial internet, smart factory
2	Vol.17 No.5 (2023)	Effect of Vibration Behavior in Low-Frequency Vibration Cutting on Surface Properties of Workpiece Hiroyuki Kodama, Shota Matsuno, Naoyuki Shibata, and Kazuhito Ohashi	low-frequency vibration cutting, vibration behavior, surface roughness, cross-sectional curve
7	Vol.17 No.5 (2023)	Anomalous Change Detection in Drilling Process Using Variational Autoencoder with Temperature Near Drill Edge Haruhiko Suwa, Kazuya Oda, and Koji Murakami	anomalous change detection, drilling process, machine learning, variational autoencoder, temperature near drill edge
17	Vol.17 No.3 (2023)	Effect of Perspective and Visuo-Tactile Feedback in Virtual Reality-Based Posture Learning Ryo Hanashima, Takumi Tokuda, Masaaki Mochimaru, and Junji Ohyama	motor learning, virtual reality, avatar, perspective, tactile sensation
18	Vol.16 No.6 (2022)	Analysis of Business Feasibility for Introduction of Retread Tires in Passenger Cars Tomiya Kimura, Tetsuya Toma, and Masaru Nakano	sustainable manufacturing, life cycle assessment, retread tire, recycling, clean energy vehicles (CEV)
8	Vol.17 No.5 (2023)	Feasibility of 8-Shaped Motion Test for Five-Axis Machining Center Yukitoshi Ihara, Souma Kajino, and Yuto Inoue	motion accuracy, test standard, five-axis machining center, interpolation
10	Vol.17 No.4 (2023)	Effect of FDM Processing Conditions on Snap-Fit Characteristic in Assembly Hiroyuki Taguchi, Yohei Kunimatsu, and Hiroyuki Narahara	snap-fit, additive manufacturing, fused deposition modeling, wavelet
10	Vol.17 No.3 (2023)	Digital Twin of Experience for Human–Robot Collaboration Through Virtual Reality Tetsunari Inamura	digital twin, virtual reality, human–robot interaction, behavior change
9	Vol.17 No.5 (2023)	Temperature Control Performance of a Built-In Motor Spindle by Developed Temperature Feedback Control System Shumon Wakiya, Ryota Ishida, Jumpei Kusuyama, and Yohichi Nakao	precise temperature feedback control system, built-in motor spindle, thermal stability, machine tools, cooling system
3	Vol.17 No.5 (2023)	Posture Optimization in Robot Machining with Kinematic Redundancy for High-Precision Positioning Shingo Tajima, Satoshi Iwamoto, and Hayato Yoshioka	robot machining, path generation, industrial robot, kinematic redundancy, trajectory
12	Vol.17 No.5 (2023)	Simple Measuring of Positioning Accuracy for Machining Centers Using Image Matching Akinori Saito and Yoji Jimba	machining center, positioning accuracy, linear axis, image matching, laser speckle
10	Vol.17 No.4 (2023)	Experimental Investigation of Spatter Particle Behavior and Improvement in Build Quality in PBF-LB Mitsuyoshi Yoshida, Tatsuaki Furumoto, Kazuaki Sakuma, Kai Kawasaki, and Kazuyuki Itagaki	laser powder-bed fusion, spatter particles, laser scanning, gas flow, build quality
16	Vol.17 No.2 (2023)	Study on Process Design Based on Language Analysis and Image Discrimination Using CNN Deep Learning Akio Hayashi and Yoshitaka Morimoto	process design, image discrimination, AI, language analysis, STEP
16	Vol.15 No.3 (2021)	Introduction of All-Around 3D Modeling Methods for Investigation of Plants Nobuo Kochi, Sachiko Isobe, Atsushi Hayashi, Kunihiro Kodama, and Takanari Tanabata	three-dimensional modeling, plant, photogrammetry, SfM/MVS, active and passive methods
16	Vol.14 No.6 (2020)	Defining Requirements on Technology Systems Assessment from Life Cycle Perspectives: Cases on Recycling of Photovoltaic and Secondary Batteries Yasunori Kikuchi, Aya Heiho, Yi Dou, Izuru Suwa, I-Ching Chen, Yasuhiro Fukushima, and Chiharu Tokoro	bibliometric analysis, requirement definition, life cycle assessment
-	Vol.11 No.4 (2017)	Scenario Analysis for Clean Energy Vehicles in UK Considering Introduction of Renewable Energy Sources Hiroshi Nakamura and Masaru Nakano	renewable energy source, clean energy vehicle, scenario analysis
2	Vol.17 No.5 (2023)	Study on the Surface Enhancement of Thin-Walled Metallic Materials Using a Novel Double-Side Burnishing Tool Hibiki Yamazaki, Jiang Zhu, and Tomohisa Tanaka	burnishing, thin-walled material, surface modification, surface enhancement, fatigue strength
14	Vol.17 No.4 (2023)	Technique for Introducing Internal Defects with Arbitrary Sizes and Locations in Metals via Additive Manufacturing and Evaluation of Fatigue Properties Kazuyuki Morishita, Taichi Yamaguchi, Kentaro Wada, and Junichiro Yamabe	additive manufacturing, metal fatigue, internal defect, steel, X-ray CT
16	Vol.17 No.4 (2023)	Process Planning with Removal of Melting Penetration and Temper Colors in 5-Axis Hybrid Additive and Subtractive Manufacturing Akira Nishiyama, Shun Kayashima, Nobuyuki Sumi, Takashi Hashimoto, Takeyuki Abe, and Jun’ichi Kaneko	hybrid manufacturing, process planning, directed energy deposition, subtractive manufacturing, temper color
17	Vol.17 No.1 (2023)	Influence of the Impact Angle on Machining in Powder Jet Processing Chieko Kuji, Kuniyuki Izumita, Keita Shimada, Masayoshi Mizutani, Keiichi Sasaki, and Tsunemoto Kuriyagawa	powder jet deposition, abrasive jet machining, hydroxyapatite, impact angle, machining efficiency
15	Vol.16 No.6 (2022)	An Analysis of Practices and Challenges for Plastic Recycling Industry in Malaysia Ming Hui Tan, Meng Soon Chiong, Yoon-Young Chun, Kenichiro Tsukahara, and Kiyotaka Tahara	solid waste management, plastic waste, recycling, material flow analysis, Malaysia
18	Vol.16 No.6 (2022)	Sustainable Design Implementation – Measuring Environmental Impact and User Responsibility Achmad Yahya Teguh Panuju, Martinus Martinus, Akhmad Riszal, and Hideki Kobayashi	sustainable design, eco awareness, environmental impact measurement
18	Vol.16 No.6 (2022)	Influence of Agitator Shape on Characteristics and Grinding Efficiency of Attritor Mill Chenzuo Ye, Yutaro Takaya, Yuki Tsunazawa, Kazuhiro Mochidzuki, and Chiharu Tokoro	photovoltaic panel recycling, attritor mill, agitator shape, grinding kinetics, DEM simulation
-	Vol.16 No.6 (2022)	Life Cycle Analysis of Material Efficiency Strategies for Network Goods Ana Maria Galindo Serrano and Mikko Samuli Vaija	life cycle assessment, circular economy, material efficiency, ICT network equipment
16	Vol.16 No.5 (2022)	Investigation of Air Filter Properties of Flash-Spinning Nanofiber Non-Woven Fabric Shih-Pang Tsai, Wei Wu, Hiroyoshi Sota, Toshiki Hirogaki, and Eiichi Aoyama	melt blowing method, flash spinning method, nanofiber, filter, CFD analysis
18	Vol.16 No.5 (2022)	Design and Testing of a Compact Optical Angle Sensor for Pitch Deviation Measurement of a Scale Grating with a Small Angle of Diffraction Lue Quan, Yuki Shimizu, Ryo Sato, Dong Wook Shin, Hiraku Matsukuma, Andreas Archenti, and Wei Gao	diffraction grating, optical head, laser autocollimation, pitch deviation
19	Vol.15 No.5 (2021)	Kinematic Tool-Path Smoothing for 6-Axis Industrial Machining Robots Shingo Tajima, Satoshi Iwamoto, and Hayato Yoshioka	robot machining, trajectory generation, corner smoothing, industrial robots, numerical control
17	Vol.5 No.4 (2011)	Theoretical Comparison of McKibben-Type Artificial Muscle and Novel Straight-Fiber-Type Artificial Muscle Hiroki Tomori and Taro Nakamura	artificial muscle, McKibben-type, straightfiber-type, dynamic characteristic model, static characteristic model

Count period : October 1-31, 2023