single-mostdl.php
IJAT Most Downloaded Papers, Jun. 2018
| This month | Last month | Vol. No. | Title / Authors | Keywords |
|---|---|---|---|---|
 |
1 | Vol.11 No.1 (2017) |
“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples Klaus-Dieter Thoben, Stefan Wiesner, and Thorsten Wuest |
industry 4.0, smart manufacturing, cyber-physical systems, industrial internet, smart factory |
|
- | Vol.6 No.2 (2012) |
Indirect Measurement of Volumetric Accuracy for Three-Axis and Five-Axis Machine Tools: A Review Soichi Ibaraki and Wolfgang Knapp |
volumetric accuracy, indirect measurement, machine tools, kinematic model |
 |
3 | Vol.12 No.3 (2018) |
Comparing Vibration Sensor Positions in CNC Turning for a Feasible Application in Smart Manufacturing System Jonny Herwan, Seisuke Kano, Ryabov Oleg, Hiroyuki Sawada, and Masahiro Watanabe |
CNC turning, smart manufacturing, vibration sensor |
 |
- | Vol.12 No.1 (2018) |
In Vitro Diagnostic Device with a Bio-Coupled Gate Field Effect Transistor Toshiya Sakata |
biosensor, field-effect transistor, in vitro diagnosis (IVD) |
|
- | Vol.12 No.1 (2018) |
Microfabricated Temperature-Sensing Devices Using a Microfluidic Chip for Biological Applications Naoki Inomata, Masaya Toda, and Takahito Ono |
thermal sensor, MEMS, Micro-TAS, thermistor, mechanical resonator |
|
2 | Vol.12 No.1 (2018) |
Advances in Noninvasive Glucose Sensing Enabled by Photonics, Acoustics, and Microwaves Takuro Tajima, Masahito Nakamura, Yujiro Tanaka, and Michiko Seyama |
photoacoustic, dielectric spectroscopy, noninvasive glucose sensor, biomedical, multiphysics-based sensing |
|
7 | Vol.12 No.3 (2018) |
Artificial Neural Networks for Tool Wear Prediction Based on Sensor Fusion Monitoring of CFRP/CFRP Stack Drilling Alessandra Caggiano and Luigi Nele |
drilling, composite material, sensor monitoring, artificial neural network, tool wear prediction |
|
12 | Vol.12 No.1 (2018) |
MEMS Sensor Devices with a Piezo-Resistive Cantilever Kiyoshi Matsumoto and Isao Shimoyama |
cantilever, sensor, piezo-resistive, MEMS |
 |
12 | Vol.3 No.1 (2009) |
Design of Competitive Maintenance Service for Durable and Capital Goods Using Life Cycle Simulation Hitoshi Komoto and Tetsuo Tomiyama |
life cycle simulation, life cycle design, service design, competitions |
|
12 | Vol.10 No.5 (2016) |
Fabrication of Metallic Nanodot Arrays Using Nano-Chemical Stamping Technique with a Polymer Stamp Potejana Potejanasak, Masahiko Yoshino, and Motoki Terano |
nano-chemical stamping, gold nanodot, nanodot morphology and alignment, thermal dewetting, polymer film stamp |
|
12 | Vol.12 No.1 (2018) |
Nanotemplate-Guided Self-Assembly of Gold Nanoparticles and its Application to Plasmonic Bio/Chemical Sensing Koji Sugano |
self-assembly, nanoparticle, plasmon, bio/chemical sensors, surface-enhanced Raman spectroscopy |
|
8 | Vol.11 No.3 (2017) |
Development of a Haptic Device with Wire-Driven Parallel Structure Carlo Ferraresi, Carlo De Benedictis, and Francesco Pescarmona |
haptic device, parallel structure, telemanipulation, wire-driven robot, pneumatic haptic device |
|
6 | Vol.12 No.1 (2018) |
Development and Evaluation of New Material Measure with Chirp Form for Surface Texture Instruments Ichiro Yoshida, Yuichi Okazaki, Noriyuki Kato, Nobuyuki Tanaka, and Kozo Miyamoto |
material measure, measurement standard, surface texture, chirp form, Gaussian filter |
Count period : June 1 - 30, 2018