single-mostdl.php

IJAT Most Downloaded Papers, December 2016

This month Last month Vol. No. Title / Authors Keywords
1 - Vol.2
No.6
(2008)
Development of an Electrode Motion Control Device for Curved Hole Electrical Discharge Machining
Tohru Ishida, Yasuhito Miyake, Koji Teramoto, and Yoshimi Takeuchi
curved hole, electrical discharge machining, water channel, servomotor, electrode motion control
2 - Vol.10
No.5
(2016)
Upgradable Design for Sustainable Manufacturer Performance and Profitability and Reduction of Environmental Load
Shuho Yamada, Tetsuo Yamada, Stefan Bracke, and Masato Inoue
design for upgradability, preference set-based design, CO2 emission, sustainability, profitability
3 - Vol.2
No.6
(2008)
Creation of U-Shaped and Skewed Holes by Means of Electrical Discharge Machining Using an Improved Electrode Curved Motion Generator
Tohru Ishida and Yoshimi Takeuchi
curved hole, electrical discharge machining, water channel, slider crank chain, helical compression spring
3 - Vol.8
No.5
(2014)
Fundamental Study on Hole Fabrication Inside a Hole by Means of Electrical Discharge Machining
Tohru Ishida, Yuichi Okahara, Masahiko Kita, Akira Mizobuchi, Keiichi Nakamoto, and Yoshimi Takeuchi
electrical discharge machining, hole, pipeline, pneumatic components, hydraulic equipment
4 - Vol.3
No.1
(2009)
Tele-Inverse Manufacturing -- An International E-Waste Recycling Proposal
Mitsutaka Matsumoto, Nozomu Mishima, and Shinsuke Kondoh
tele-inverse manufacturing, e-waste, recycling, remote operation
4 - Vol.3
No.5
(2009)
Elementary Study on the Creation of Cross Section's Changing Holes by Means of Electrical Discharge Machining
Tohru Ishida, Yuichi Mochizuki, and Yoshimi Takeuchi
cross section’s changing hole, electrical discharge machining, reciprocating block slider crank mechanism
4 - Vol.4
No.6
(2010)
Design and Implementation of Automatic Discharge Gap Controller for a Curved Hole Creating Microrobot with an Electrical Discharge Machining Function
Tohru Ishida and Yoshimi Takeuchi
curved hole, electrical discharge machining, discharge gap, shape memory alloy, bidirectional actuator
4 - Vol.5
No.1
(2011)
Integral Sliding Mode Control for Fast Tool Servo Diamond Turning of Micro-Structured Surfaces
De Ping Yu, Geok Soon Hong, and Yoke San Wong
integral sliding model control, fast tool servo, diamond turning, micro-structured surfaces
4 - Vol.5
No.6
(2011)
Communication Robot Based on Image Processing and Voice Recognition
Noriyuki Kawarazaki and Tadashi Yoshidome
communication robot, handshaking, personal distance, natural interaction
4 1 Vol.8
No.1
(2014)
In-Process and On-Machine Measurement of Machining Accuracy for Process and Product Quality Management: A Review
Yasuhiro Takaya
in-process measurement, on-machine measurement, manufacturing metrology, machine tools, quality management
4 - Vol.8
No.4
(2014)
A Generalized Architecture for Academic and Industrial Automation and Control via Internet
Ahmed O. Abdul Salam
industrial control, laboratory automation, Internet
4 3 Vol.9
No.4
(2015)
R-Test Analysis Software for Error Calibration of Five-Axis Machine Tools – Application to a Five-Axis Machine Tool with Two Rotary Axes on the Tool Side –
Soichi Ibaraki, Yu Nagai, Hisashi Otsubo, Yasutaka Sakai, Shigeki Morimoto, and Yosuke Miyazaki
Metrology, R-test, five-axis machine tools, calibration, location error, error motion, geometric error.
4 - Vol.10
No.1
(2016)
Functional Texture Design and Texturing Processes
Nobuyuki Moronuki
texture, functionality, processes, top-down, bottom-up
4 - Vol.10
No.2
(2016)
Ontology Modeling for Intelligent Computer-Aided Design of Apparel Products
Yu Zhao, Feng Dai, Madan M. Gupta, and Wenjun Zhang
pattern, apparel, conceptual, ontology, data modeling, structure
4 - Vol.10
No.2
(2016)
Development of Cutting Force Prediction Method Using Motion Information from CNC Controller
Tomoya Hida, Tetsuya Asano, Chiharu Higashino, Masaaki Kanamaru, Jun’ichi Kaneko, and Yoshimi Takeuchi
cutting force, prediction, CNC, NC data, motion error
4 - Vol.10
No.4
(2016)
Designing Multi-Agent Simulation with Big Time Series Data for a Global Supply Chain System
Kenji Tanaka, Shen-Ming Gu, and Jing Zhang
global supply chain, multi-agent simulation, forecast, lead time, inventory
4 - Vol.10
No.5
(2016)
In-Process Tool Wear Detection of Uncoated Square End Mill Based on Electrical Contact Resistance
Amine Gouarir, Syuhei Kurokawa, Takao Sajima, and Mitsuaki Murata
electric contact resistance, in-process monitoring, solid and throw-away square end mill, flank wear, electromotive force

Count period : December 1-31, 2016

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Mar. 19, 2023