single-mostdl.php
IJAT Most Downloaded Papers, December 2015
This month | Last month | Vol. No. | Title / Authors | Keywords |
---|---|---|---|---|
1 | - | Vol.3 No.2 (2009) |
A Machine Tool Spindle Achieving Real-Time Balancing Using Magnetic Fluid Keiichi Nakamoto, Shinya Mitsuhashi, Kazuhiko Adachi, and Keiichi Shirase |
machine tool spindle, real-time balancing, magnetic fluid, smart spindle, vibration control, unbalance mass |
2 | - | Vol.2 No.4 (2008) |
Precision Analysis of Automatic Pouring Machines for the Casting Industry Yoshiyuki Noda and Tadashi Nishida |
casting process, automatic pouring machine, filling control, modeling, precision analysis |
2 | - | Vol.3 No.6 (2009) |
Upper-Limb Power-Assist Control for Agriculture Load Lifting Eiichi Yagi, Daisuke Harada, and Masaaki Kobayashi |
power assist system, wearable robot system, exoskeleton, pneumatic actuator, emg, elbow motion, shoulder motion, farming, lift-up motion |
2 | - | Vol.6 No.2 (2012) |
Experimental Evaluation of the Thermal Machine Tool Behavior for Model Updating Jörg E. Franke, Tobias Maier, Franziska Schäfer, and Michael F. Zaeh |
thermal analysis, finite element analysis, thermal error analysis, temperature measurement, cutting process |
2 | - | Vol.6 No.6 (2012) |
Toolpath Generation Method Based on Control Characteristics of Machine Tool for High-Speed and High-Accuracy Machining Kosuke Saito, Hideki Aoyama, and Noriaki Sano |
CAM, machine tool controller, high speed machining, high accuracy machining |
2 | - | Vol.7 No.3 (2013) |
Effect of Carbon Fiber Orientation and Helix Angle on CFRP Cutting Characteristics by End-Milling Masahiro Hagino and Takashi Inoue |
CFRP, end milling, helix angle, carbon fiber orientation, cutting force |
2 | - | Vol.7 No.4 (2013) |
Drilling of CFRP/Ti6Al4V Stack Board Junsuke Fujiwara, Ryuichi Nagaura, and Tetsuya Tashiro |
CFRP, Ti alloy, drilling, mist |
2 | 3 | Vol.9 No.1 (2015) |
Cutting Force Prediction in Drilling of Unidirectional Carbon Fiber Reinforced Plastics Shoichi Tamura and Takashi Matsumura |
CFRP, cutting force, drilling, fiber orientation, simulation |
2 | - | Vol.9 No.4 (2015) |
Effects of Fiber Orientation Direction on Tool-Wear Processes in Down-Milling of Carbon Fiber-Reinforced Plastic Laminates Satoru Maegawa, Yuta Morikawa, Shinya Hayakawa, Fumihiro Itoigawa, and Takashi Nakamura |
carbon fiber reinforced plastics, tool wear, tool life, fiber orientation direction, processed surface quality |
2 | - | Vol.9 No.5 (2015) |
Calibration Using Cylindrical Artifacts for 3D Laser Measurement System Kazuhiro Enami |
3D measurement, calibration, artifact calibration |
2 | - | Vol.9 No.5 (2015) |
Detection of Human Position and Motion by Thermopile Infrared Sensor Xipeng Zhang, Hiroaki Seki, and Masatoshi Hikizu |
thermopile infrared sensor, human position, body orientation, steepest descent method |
2 | - | Vol.9 No.6 (2015) |
Fabrication of Microneedle Mimicking Mosquito Proboscis Using Nanoscale 3D Laser Lithography System Masato Suzuki, Takahiro Sawa, Tomokazu Takahashi, and Seiji Aoyagi |
microneedle, rapid prototyping, biomimetics, mosquito, low invasive treatment |
Count period : December 1-31, 2015