JRM Vol.25 No.1 pp. 183-191
doi: 10.20965/jrm.2013.p0183


Development of Multi-Scalable Microhand System with Precise Motion Ability

Ebubekir Avci*, Kenichi Ohara**, Tomohito Takubo**,
Yasushi Mae*, and Tatsuo Arai*

*Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama-cho, Toyonaka, Osaka 560-8531, Japan

**Graduate School of Engineering, Osaka City University, 3-3-138 Sugimoto, Sumiyoshi, Osaka City, Osaka 558-8585, Japan

March 1, 2012
August 15, 2012
February 20, 2013
multi-scalability, parallel link mechanism, workspace analysis, micromanipulation
Numerous types of microhands have recently been designed to perform micromanipulation tasks that are crucial for micromachine assembly, microsurgery operations and biological cell analysis. Because most current microsystems are task-specific, the realization of a general-purpose microhand that is compatible with a wide range of applications is necessary. There are two problems to be solved in order to realize a general-purpose micromanipulation system however. First, creating a large workspace with high resolution in which to grasp multisized microobjects is still a challenging feature for available microhands. Second, precise motion throughout a large workspace for the transportation of microobjects in the limited space of a microscope is another arduous task. In this study, we propose a microhand system that achieves multiscalability, i.e., a large workspace with precise positioning for the grasping and transportation of multisized microobjects. This system has been designed with an optimized parallel mechanism in which the manipulability of different-sized microobjects is improved from 1–45 µm to 1–132 µm. The proposed rough-to-fine motion strategy that allows us to achieve a large range with high resolution positioning ability for performing the transportation task moreover minimized error from 17 µm to 0.18 µm.
Cite this article as:
E. Avci, K. Ohara, T. Takubo, Y. Mae, and T. Arai, “Development of Multi-Scalable Microhand System with Precise Motion Ability,” J. Robot. Mechatron., Vol.25 No.1, pp. 183-191, 2013.
Data files:
  1. [1] K. Inoue, T. Tanikawa, and T. Arai, “Micro-manipulation system with a two-fingered micro-hand and its potential application in bioscience,” J. of Biotechnology, Vol.133, pp. 219-224, 2008.
  2. [2] Y. Yamanishi, S. Sakuma, T. Iyanagi, F. Arai, T. Arai, A. Hasegawa, T. Tanikawa, A. Ichikawa, O. Satoh, A. Nakayama, H. Aso, M. Goto, S. Takahashi, and K.Matsukawa, “Design and Fabrication of All-in-One Unified Microfluidic Chip for Automation of Embryonic Cell Manipulation,” J. of Robotics and Mechatronics, Vol.22, pp. 371-379, 2010.
  3. [3] N. Dechev, J. K. Mills, and W. L. Cleghorn, “Mechanical Fastener Designs For Use in theMicroassembly of 3dMicrostructures,” Proc. of ASME IMECE, 2004.
  4. [4] A. N. Das, R. Murthy, D. O. Popa, and H. E. Stephanou, “A Multiscale Assembly and Packaging System for Manufacturing of Complex Micro-Nano Devices,” IEEE Trans. on Automation Science and Engineering, Vol.9, pp. 160-170, 2012.
  5. [5] C. Clévy, A. Hubert, and N. Chaillet, “Flexible Micro-Assembly System Equipped with an Automated Tool Changer,” J. of micronano mechatronics, Vol.4, pp. 59-72, 2008.
  6. [6] B. Tamadazte, N. L. Fort-Piat, S. Dembele, and E. Marchand, “Microassembly of Complex and Solid 3D MEMS by 3D Vision-Based Control,” Proc. IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 3284-3289, 2009.
  7. [7] M. Gauthier, E. Gibeau, and D. Heriban, “Submerged Robotic Micromanipulation and Dielectrophoretic Micro-object Release,” Proc. IEEE 9th Int. Conf. on Control, Automation, Robotics and Vision, pp. 1-6, 2006.
  8. [8] Z. Lu, C. Moraes, Y. Zhao, L. You, C. A. Simmons, and Y. Sun, “A Micromanipulation System for Single Cell Deposition,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 494-499, 2010.
  9. [9] A. Bolopion, H. Xie, D. S. Haliyo, and S. Regnier, “3D Haptic Handling of Microspheres,” Proc. IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 6131-6136, 2010.
  10. [10] H. Xie, J. C. Acosta, and S. Regnier, “Achieving Three-Dimensional Automated Micromanipulation at the Scale of Several Micrometers with a Nanotip Gripper,” Proc. IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 761-766, 2009.
  11. [11] B. K. Chen, Y. Zhang, and Y. Sun, “Active Release of Microobjects Using a MEMS Microgripper to Overcome Adhesion Forces,” J. of Microelectromechanical Systems, Vol.18, pp. 652-659, 2009.
  12. [12] T. Chen, L. Chen, L. Sun, W. Rong, and Q. Yang, “Micro Manipulation based on Adhesion Control with Compound Vibration,” Proc. IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 6137-6142, 2010.
  13. [13] P. R. Ouyang, R. C. Tjiptoprodjo, W. J. Zhang, and G. S. Yang, “Micro-motion devices technology: The state of arts review,” Int. J. Adv. Manuf. Technol., Vol.38, pp. 463-478, 2008.
  14. [14] A. A. Ramadan, T. Takubo, Y. Mae, K. Ohara, and T. Arai, “Development Process of a Chopstick-Like Hybrid-Structure Two-Fingered Micromanipulator Hand for 3-D Manipulation of Microscopic Objects,” IEEE Trans. on Ind. Elect., Vol.56, pp. 1121-1135, 2009.
  15. [15] E. Avci, K. Ohara, T. Takubo, Y. Mae, and T. Arai, “High Speed Micromanipulation System with Multi-Scalability,” IEEE Int. Conf. on Robotics and Biomimetics, pp. 1212-1217, 2011.
  16. [16] K. Kawashima, T. Arai, K. Tadano, T. Fujita, and T. Kagawa, “Development of coarse/fine dual stage using pneumatically driven bellows actuator and cylinder with air bearings,” Precision Engineering, Vol.34, pp. 526-533, 2010.
  17. [17] L. Ren, L. Wang, J. K. Mills, and D. Sun, “Vision-Based 2-D Automatic Micrograsping Using Coarse-to-Fine Grasping Strategy,” IEEE Trans. on Ind. Elect., Vol.55, pp. 3324-3331, 2008.
  18. [18] E. Avci, K. Ohara, T. Takubo, Y. Mae, and T. Arai, “Workspace Optimization for Multi-Scale Micromanipulation System,” MHS2010 & Micro-Nano Global COE, pp. 328-333, 2010.
  19. [19] K. Inoue, D. Nishi, T. Takubo, T. Tanikawa, and T. Arai, “Performance evaluation of teleoperation for manipulating micro objects using two-fingered micro hand,” J. of Robotics and Mechatronics, Vol.19, pp. 577-584, 2007.
  20. [20] C. Nguyen, K. Ohara, E. Avci, T. Takubo, Y. Mae, and T. Arai, “Automated Micromanipulation of a Microhand with All-In-Focus Imaging System,” IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 427-432, 2011.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on May. 19, 2024