JRM Vol.24 No.2 pp. 298-310
doi: 10.20965/jrm.2012.p0298


High Speed and High Sensitivity Slip Sensor for Dexterous Grasping

Seiichi Teshigawara*, Takahiro Tsutsumi**, Yosuke Suzuki*,
and Makoto Shimojo*

*Department of Mechanical Engineering and Intelligent Systems, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu, Tokyo 182-8585, Japan

**Yokogawa DCS Hardware Development, 2-9-32 Nakacho, Musashino-shi, Tokyo 180-8750, Japan

July 26, 2011
November 9, 2011
April 20, 2012
slip detection, pressure conductive rubber, grasping
Slip-detecting tactile sensors are essential if robot hands are ever to achieve the gripping motions of human hands. In our previous research, we developed a flexible, thin, and lightweight slip sensor that exploits resistance changes in pressure conductive rubber. However, using this sensor, it was difficult to distinguish between object slip and changes in normal force. Therefore, in this research, we investigate a method of identifying object slip by analyzing the frequency components of the output signal from the sensor. As a result, we find that high-frequency components of several kilohertz or more are included in the complex voltage signal immediately before object slip. Therefore, using this high-frequency component, we develop a simple structure sensor that distinguishes between both contact and a state of immediately before slip with high sensitivity. Moreover, we design a slip sensor for a robot hand and examine the effects of noise by manipulation. Finally, we describe an experiment involving the adjustment of the gripping force of a robot hand.
Cite this article as:
S. Teshigawara, T. Tsutsumi, Y. Suzuki, and M. Shimojo, “High Speed and High Sensitivity Slip Sensor for Dexterous Grasping,” J. Robot. Mechatron., Vol.24 No.2, pp. 298-310, 2012.
Data files:
  1. [1] T. Wösch and W. Feiten, “Reactive Motion Control for Human-Robot Tactile Interaction,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 3807-3812, 2002.
  2. [2] H. Iwata, S. Kobayashi, T. Aono, and S. Sugano, “Design of Anthropomorphic 4-DOF Tactile Interaction Manipulator with Passive Joints,” Proc. IEEE Int. Conf. on Intelligent Robots and Systems, pp. 1785-1790, 2005.
  3. [3] R. S. Johansson and G. Westling, “Roles of glabrous skin receptors and sensorimotor memory in automatic control of precision grip when lifting rougher or more slippery objects,” Exp Brain Res, Vol.56, pp. 550-564, 1984.
  4. [4] H. R. Nicholls and M. H. Lee, “A Survey of Robot Tactile Sensing Technology,” Int. J. Robotics Research, Vol.8, No.3, pp. 3-30, 1989.
  5. [5] M. H. Lee and H. R. Nicholls, “Tactile Sensing for Mechatronics – A State of the Art Survey,” Mechatronics, Vol.9, pp. 1-31, 1999.
  6. [6] M. R. Tremblay and M. R. Cutkosky, “Estimating Friction Using initial Slip Sensing During Manipulation Task,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 429-434, 1993.
  7. [7] J. S. Son, E. A. Monteverde, and R. D. Howe, “A Tactile Sensor for Localizing Transient Events in Manipulation,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 471-476, 1994.
  8. [8] Y. Yamada, H. Morita, and Y. Umetani, “Vibrotactile Sensor Generating Impulsive Signals for Distinguishing Only Slipping States,” Proc. IEEE Int. Conf. on Intelligent Robotics and Systems, pp. 844-850, 1999.
  9. [9] G. Canepa, R. Petrigliano, M. Campanella, and D. De Rossi, “Detection of initial Object Slippage by Skin-Like Sensing and Neural Network Processing,” IEEE Trans. on Systems, Man, and Cybernetics, Part-B, Vol.28, No.3, pp. 348-356, 1998.
  10. [10] D. Goeger, N. Ecker, and H. Woern, “Tactile Sensor and algorithm to detect slip in robot grasping processes,” Proc. IEEE Int. Conf. on Robotics and Biomimetics, pp. 1480-1485, 2008.
  11. [11] B. Eberman and J. K. Salisbury, Jr. “Application of Change Detection to Dynamic Contact Sensing,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 471-476, 1994.
  12. [12] C. Melchiorri, “Slip Detection and Control Using Tactile and Force Sensors,” IEEE/ASME Trans. on Mechatronics, pp. 235-243, 2000.
  13. [13] T. Takahashi, T. Tsuboi, T. Kishida, Y. Kawanami, S. Shimizu, M. Iribe, T. Fukushima, and M. Fujita, “Adaptive Grasping by Multi Fingered Hand with Tactile Sensor Based on Robust Force and Position Control,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 264-271, 2008.
  14. [14] D. Gunji, Y, Mizoguchi, S. Teshigawara, A. Ming, A. Namiki, M. Ishikawa, and M. Shimojo, “Grasping Force Control of Multifingered Robot Hand based on Slip Detection Using Tactile Sensor,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 2605-2610, 2008.
  15. [15] S. Teshigawara, K. Tadakuma, A. Ming, M. Ishikawa, and M. Shimojo, “High Speed and High Sensitivity Slip Sensor Utilizing Characteristics of Conductive Rubber – Relationship Characteristics of Conductive Rubber and Resistance Change –,” J. of Robotics and Mechatronics, Vol.21, No.2, pp. 200-208, 2009.
  16. [16] J.-C. Huang, “Carbon Black Filled Conducting Polymers and Polymer Blends,” Advances in Polymer Technology, Vol.21, No.4, pp. 299-313, 2002.
  17. [17] J. J. Benedetto and M. W. Frazier, “WAVELETS: Mathematics and Applications,” CRC-Press 1993.
  18. [18] M. Vetterli and J. Kovacevic, “Wavelets and Subband Coding,” Prentice Hall PTR, 1995.
  19. [19] A. Namiki, Y. Imai, M. Ishikawa, and M. Kaneko, “Development of a High-speed Multifingered Hand System and its Application to Catching,” Proc.of IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 2666-2671, 2003.
  20. [20] M. Ishikawa and M. Shimojo, “A Tactile Sensor Using Pressure-Conductive Rubber,” Proc. the 2nd Sensor Symp., Tsukuba, pp. 189-192, 1982.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jun. 19, 2024