JRM Vol.21 No.1 pp. 104-112
doi: 10.20965/jrm.2009.p0104


Force Compensating Trajectories for Redundant Robots: Experimental Results

Daniela Vassileva*, George Boiadjiev**, Haruhisa Kawasaki***,
and Tetsuya Mouri***

*Harmonic Drive Systems Inc., 1856-1 Hotakamaki, Azumino, Nagano 399-8305, Japan

**Mechatronics Systems Department, Institute of Mechanics, BAS, Acad. G. Bonchev Str., bl. 4, Sofia 1113, Bulgaria

***Department of Human and Inf. Syst., Gifu University, 1-1 Yanagido, Gifu 501-1193, Japan

October 22, 2007
September 18, 2008
February 20, 2009
redundant robots, trajectories planning, external force compensation, kernel
We proposed a new approach for redundant robots trajectories planning, based on the Null space (or Kernel) features. The Null space (Kernel) exists only in the case of redundant robots and it describes these joints motion which do not affect the robot end-effector motion in the sense of both position and orientation. Based on this “hidden motion” realized in the configuration space, which does not affect the motion in the working zone, we can control independently the robot end-effector position and orientation motions, or just maintain its state while some external force is applied to it.
The proposed control strategy is simple, no additional penalty functions are used to restraint the end-effector motion as in the case of the conventional methods. No pseudo inverse kinematics calculations are required; the desired trajectories are generated directly in the configuration space. No complicated control schemes are introduced, the proposed method is based on solving algebraic systems of equations and finding eigenvectors and eigenvalues.
In the paper the results from simulations and experiments based on the proposed method are presented and discussed.
Cite this article as:
D. Vassileva, G. Boiadjiev, H. Kawasaki, and T. Mouri, “Force Compensating Trajectories for Redundant Robots: Experimental Results,” J. Robot. Mechatron., Vol.21 No.1, pp. 104-112, 2009.
Data files:
  1. [1] R. Murray, Z. Li, and S. Sastry, “A Mathematical Introduction to Robotic Manipulation,” CRC Press, pp. 456, 1994.
  2. [2] D. Bertram, J. Kuffner, R. Dillmann, and T. Asfour, “An integrated approach to inverse kinematics and path planning for redundant manipulators,” Proc. Of IEEE Conf. on Robotics and Automation, pp. 1874-1879, Orlando, 2006.
  3. [3] O. Yonghwan, C. Wankyun, and Y. Youngil, “Extended Impedance Control of Redundant Manipulators Based on Weighted Decomposition of Joint Space,” Journal of Robotics Systems, 15(5), pp. 231-258, 1998.
  4. [4] I. Iossifidis and G. Schoner, “Dynamical Systems approach for the Autonomous Avoidance of Obstacles and Joint-limits for a Redundant Robot Arm,” Proc. Of the 2006 IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, Oct. 9-15, Beijing, China, 2006.
  5. [5] Y. Zhang and J. Wang, “Obstacle Avoidance for Kinematically Redundant Manipulators using a Dual Neural Network,” IEEE Trans. On Systems, Man and Cybernetics, Part B: Cybernetics, Vol.34, No.1, pp. 752-760, 2004.
  6. [6] J. M. Hollerbach and K. S. Suh, “Redundancy Resolution of Manipulators Through Torque Optimization,” Proc. IEEE ICRA, pp. 1016-1021, 1985.
  7. [7] P. Hsu, J. Hauser, and S. Sastry, “Dynamic Control of Redundant Manipulators,” J. Robot. Syst., 6, pp. 133-148, 1989.
  8. [8] C. Klein and C. Huang, “Review on pseudoinverse control for use with kinematically redundant manipulators,” IEEE Transactions on Systems, Man and Cybernetics, Vol.13, No.3, pp. 245-250, 1983.
  9. [9] J. A. Kuo and D. J. Sanger, “Task Planning for Serial Redundant Manipulators,” Robotica, Vol.15, pp. 75-83, 1997.
  10. [10] F. Lewis, D. Dawson, and C. Abdalah, “Robot Manipulator Control, Theory and Practice,” 3rded., Marcel Dekker, Inc., pp. 614, 2004.
  11. [11] L. Sciavicco and B. Siciliano, “Modeling and Control of Robot-manipulators,” 2nded., Springer, pp. 377, 2007.
  12. [12] G. Boiadjiev, D. Vassileva, H. Kawasaki, and T. Mouri, “Sensibility Control of Redundant Robots: Sensibility Directions along Trajectory Tangent Vector,” Proc. of the IEEE Int. Conf. on Industrial Technology ICIT'2005, Hong Kong, pp. 1164-1169, 2005.
  13. [13] D. Vassileva, G. Boiadjiev, H. Kawasaki, and T. Mouri, “Sensibility Control of Redundant Robots: Force Compensation by Kernel Trajectories,” Proc. of the IEEE Int. Conf. on Industrial Technologies, pp. 1061-1065, India, 2006.
  14. [14] G. Strang, “Linear Algebra and its applications,” NY Press, 1976.
  15. [15] D. Vassileva, G Boiadjiev, H. Kawasaki, and T. Mouri, “Application of the Servo-control Method with Standard Corrections for Robot-manipulators Control,” Proc. of the IEEE Int. Conf. on Mechatronics and Autom. ICMA'07, pp. 3238-3243, Harbin, China, 2007.
  16. [16] G. Boiadjiev, D. Vassileva, H. Kawasaki, and T. Mouri, “Sensibility control of redundant robots: position control by image trajectories,” Int. Conf. on Comp. Intelligence for Modeling, Contr. & Autom. CIMCA'06, CD, Sydney, Australia, 2006.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jun. 03, 2024