Top > JRM > Cooperative Obstacle-Avoidance Pushing Transportation of a Pla ...

single-rb.php

JRM Vol.17 No.1 pp. 77-88
doi: 10.20965/jrm.2005.p0077
(2005)

Development Report:

Views over last 60 days: 488

Cooperative Obstacle-Avoidance Pushing Transportation of a Planar Object with One Leader and Two Follower Mobile Robots

Yanqun Le*, Hiroyuki Kojima*, and Kazuhiko Matsuda**

*Department of Mechanical System Engineering, Gunma University, Kiryu, Gunma 376-8515, Japan

**Fuji Heavy Industries Ltd., 3-9-6 Ozawa, Mitaka, Tokyo 181-8577, Japan

Received:
June 16, 2004
Accepted:
December 13, 2004
Published:
February 20, 2005
Creative Commons License
Keywords:
pushing, transportation, obstacle avoidance, mobile robot, trajectory planning
Abstract
This paper proposes a cooperative obstacle-avoidance pushing transportation system using one leader and two follower mobile robots. Its usefulness and effectiveness are illustrated and confirmed numerically as well as experimentally. The cooperative obstacle-avoidance pushing transportation control consists of the obstacle configuration measurement phase by the leader mobile robot, the trajectory-planning phase and the pushing transfer control phase by the two follower mobile robots. In the obstacle configuration measurement phase, the leader mobile robot moves by use of the obstacle-avoidance vehicle control method constructed with six infrared sensors and the pattern recognition algorithm, and three waypoints for the trajectory planning of the follower mobile robots are extracted. In the trajectory-planning phase, the two follower mobile robots receive the three modified waypoints from the leader mobile robot through wireless communication systems, and the obstacle-avoidance trajectories by use of cubic spiral and straight-line segments are generated. Then, in the pushing transfer control phase, a planar object is transported with the pushing and constraining forces resulting from the passive compliance mechanisms attached to the follower mobile robots, and the shock is effectively reduced by the passive compliance mechanisms. From the numerical simulation and experimental results using autonomous mobile robots (MK-01X developed by Fuji Heavy Industries Ltd.), it is confirmed that the planar object can be successfully transported by pushing from the start configuration to the goal in spite of the existence of the obstacle.
Cite this article as:
Y. Le, H. Kojima, and K. Matsuda, “Cooperative Obstacle-Avoidance Pushing Transportation of a Planar Object with One Leader and Two Follower Mobile Robots,” J. Robot. Mechatron., Vol.17 No.1, pp. 77-88, 2005.
Data files:
References
  1. [1] T. Sugar, and V. Kumar, “Control of cooperating mobile manipulators,” IEEE Trans. On Robotics and Automation, Vol.18, No.1, pp. 94-102, 2002.
  2. [2] J. Ota, N. Miyata, T. Arai, and E. Yoshida, “Transferring and regrasping a large object by cooperation of multiple mobile robots,” Proc. ’1995 IEEE/RSJ Int. Conf. Intelligent robots and systems, pp. 543-548, 1995.
  3. [3] M. T. Mason, “Mechanics and planning of manipulator pushing operation,” Int. J Robotics Res., Vol.5, No.3, pp. 53-71, 1986.
  4. [4] T. Yoshikawa, and W. Kurisu, “Estimation of the friction distribution from pushing an object,” JRSJ, Vol.10, No.5, pp. 632-638, 1992.
  5. [5] K. M. Lynch, “Nonprehensile robotic manipulation: controllability and planning,” Ph.D. Thesis, University of Carnegie Mellon, 1996.
  6. [6] A. Sudsang, F. Rothganger, and J. Ponce, “A implemented planner for manipulating a polygonal object in the plane with three discshaped mobile robots,” Proc. ’2001 IEEE/RSJ Int. Conf. Intelligent robots and systems, pp. 1499-1506, 2001.
  7. [7] G. A. S. Pereira, V. Kumar, and M. F. M. Campos, “Decentralized algorithms for multi-robot manipulation via caging,” Int. J Robotics Res., Vol.23, No.7-8, pp. 783-795, 2004.
  8. [8] Z. Wang, and V. Kumar, “Object closure and manipulation by multiple cooperative mobile robots,” IEEE Int. Conf. On Robotics and Automation, pp. 394-399, 2002.
  9. [9] Z. Wang, Y. Hirata, and K. Kosuge, “Control a rigid caging formation for cooperative object transporation by multiple mobile robots,” Proc. ’2004 IEEE Int. Conf. Robotics & Automation, pp. 1580-1585, 2004.
  10. [10] H. Kojima, Y. Le, D. Wu, and Y. Takada, “Pushing transfer of a rectangular prism object by three mobile objects with passive compliance mechanisms,” Trans of the Japan Society of Mechanical Engineering, Vol.C-692, No.70, pp. 994-1001, 2004.
  11. [11] K. Komoritani, S. Tachi, and K. Tanie, “A method for autonomous locomotion of mobile robots,” JRSJ, Vol.2, No.3, pp. 46-55, 1985.
  12. [12] Y. Kanayama, and N. Miyake, “Trajectory generation for mobile robots,” Robotic research, Vol.3, Cambridge, MA: MIT press, pp. 333-340, 1986.
  13. [13] H. Eren, C. C. Fung, and J. Evans, “Implementation of the spline method for mobile robot path control,” Instrumentation and Measurement Technology Conference, pp. 739-744, 1999.
  14. [14] J. Hwang, R. C. Arkin, and D. Kwon, “Mobile robots at your fingertip: Bezier curve on-line trajectory generation for supervisory control,” Proc. ’2003 IEEE/RSJ Int. on intelligent robots and systems, 2003.
  15. [15] Y. Kanayama, and B. Hartman, “Smooth local path planning for autonomous vehicles,” Univ. of California, Santa Barbara, Tech. Report TRCS88-15, 1988.
  16. [16] Y. Kanayama, and Y. Kimura, “A stable tracking control method for a nonholonomic mobile robot,” Proc. ’91 IEEE/RSJ Int. Workshop on intelligent robots and systems, 1991.
  17. [17] Y. Yamamoto, and S. Fukuda, “Trajectory planning of multiple mobile manipulators with collision avoidance capability,” Proc. ’2002 IEEE Int. Conf. On Robotics & Automation, pp. 3565-2570, 2002.
  18. [18] Y. Kume, Y. Hirata, K. Kosuge, H. Asama, H. Kaetsu, and K. Kawataba, “Decentralized control of multiple mobile robots transporting a single object in coordination without using force/torque sensors,” Proc. ’2001 IEEE Int. Conf. On Robotics & Automation, pp. 3004-3009, 2001.
  19. [19] G. A. S. Pereira, B. S. Pimentel, L. Chaimovicz, and M. F. M. Campos, “Coordination of multiple mobile robots in an object carrying task using implicit communication,” Proc. ’2002 IEEE Int. Conf. On Robotics & Automation, 2002.
  20. [20] K. Kosuge, T. Oosumi, M. Satou, K. Chiba, and K. Takeo, “Transportation of a single object by two decentralize-controlled nonholonomic mobile robots,” Proc. ’1998 IEEE Int. Conf. On Robotics & Automation, pp. 2989-2994, 1998.
  21. [21] N, Miyata, J. Ota, T. Arai, and H. Asama, “Cooperative transportation by multiple mobile robots in unknown static environments associated with real-time task assignment,” IEEE trans. Robotics & Automation, Vol.18, No.5, pp. 769-780, 2002.
  22. [22] F. Lamiraux, S. Sekhavat, and J. Laumond, “Motion planning and control for Hilare pulling a trailer,” IEEE Trans. Robotics & Automation, Vol.15, No.4, pp. 640-652, 1999.

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

Copyright© 2005 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Apr. 18, 2024