Top > JRM > Development of Robot Using Pneumatic Artificial Rubber Muscles ...

single-rb.php

JRM Vol.16 No.1 pp. 8-16
doi: 10.20965/jrm.2004.p0008
(2004)

Paper:

Views over last 60 days: 755

Development of Robot Using Pneumatic Artificial Rubber Muscles to Operate Construction Machinery

Kenji Kawashima*, Takahiro Sasaki*,
Toshiyuki Miyata*, Naohiro Nakamura**,
Masato Sekiguchi***, and Toshiharu Kagawa*

*Tokyo Institute of Technology, Department of Computational Intelligence and Systems Science, 4259 Nagatsuta, Midori-ku, Yokohama-shi, 226-8503, Japan

**OLYMPUS CORPOPATION, 2951 Ishikawa-cho, Hachioji-shi, Tokyo 192-8507, Japan

***NS Solutions Corporation, 3-3-1, Minatomirai, Nishi-ku, Yokohama, Kanagawa, Japan

Received:
July 18, 2003
Accepted:
November 6, 2003
Published:
February 20, 2004
Creative Commons License
Keywords:
pneumatic, remote control, robot arm, rubber muscle
Abstract
After disasters, remote control of construction machinery is often required to ensure the safety of workers during excavation. However, only limited numbers of remote-controlled construction machinery exist, and they are typically larger than conventional machinery. After a disaster, the transportation of such machinery takes additional time and is often troublesome. Therefore, it would be desirable to develop a remote-control system that could easily be installed on ordinary construction machinery. A pneumatic humanoid robot arm is in the process of being developed. While considering the portability issue, a lightweight fiber knitted pneumatic artificial rubber muscle (PARM) was selected as the actuator for the arm. This arm can be installed on all construction machinery models, can be controlled remotely, and has been designed for easy installation and portability. In this research, construction machinery was retrofitted with a pneumatic robot that enables it to be operated remotely. This robot has 6 degrees of freedom and utilizes the fiber knitted PARM. Experiments were conducted to measure the static characteristics of the new PARM and to measure their performance in the remote control of construction machinery. Experimental results showed that the developed system is able to achieve handling two levers of machinery, one that controls back and forward movement and the other that controls the bucket. Experimental results showed that the developed system successfully operated construction machinery remotely.
Cite this article as:
K. Kawashima, T. Sasaki, T. Miyata, N. Nakamura, M. Sekiguchi, and T. Kagawa, “Development of Robot Using Pneumatic Artificial Rubber Muscles to Operate Construction Machinery,” J. Robot. Mechatron., Vol.16 No.1, pp. 8-16, 2004.
Data files:
References
  1. [1] H. Hasunuma et al., “A tele-operated Humanoid Robot Drives a Lift Truck,” Proc. IEEE Int. Conf. on Robotics and Automation, 2246/2252, 2002.
  2. [2] K. Yokoi, M. Kobayashi, H. Hasunuma, H. Moriyama, T. Itoko, Y. Yanagihara, T. Ueno, K. Ohya, “Application of Humanoid Robots for Teleoperations of Construction Machines,” IEEE/RSJ IROS Workshop on Explorations towards Humanoid Robot Applications, 2001.
  3. [3] M. Minamoto, “Development of a portable tele-operated robot for the manipulation of a backhoe shovel for the restoration of disaster stricken sites”; SPIE, 1999.
  4. [4] R. A. Schulte, “The Characteristics of the McKibben Artificial Muscle,” In The Application of External Power in Prosthetics and Orthetics, publ.874, Nas-Rc, 94-115, 1962.
  5. [5] V. L. Nickel, J. Perry, and A. L. Garrett, “Development of useful function in the severely paralyzed hand,” Journal of Bone and Joint Surgery, Vol.45A, No.5, pp.933-952, 1963M.
  6. [6] C. Chou and B. Hannaford, “Measurement and modeling of Mckibben pneumatic artificial muscles,” IEEE Trans. Robot. Automat., vol.2, pp.90-102, Feb.1996.
  7. [7] Bridgestone Corp., “The Rubbertuator,” product literature, 1988.
  8. [8] Uno, Motoo, “Artificial Rubber Muscles and its application to robot,” Journal of the Japan Hydraulics and Pneumatics Society, 17(3), 175-180, (1986)(in Japanese).
  9. [9] G. K. Klute, J. M. Czerniecki, B. Hannaford “McKibben Artificial Muscles: Pneumatic Actuators with Biomechanical Intelligence,” IEEE/ASME Int Conf on Advanced Intelligent Mechatronics (AIM ‘99), September 19-22, 1999 in Atlanta, GA.
  10. [10] T. Kagawa, T. Fujita and T. Yamanaka, “Nonlinear model of artificial muscle,” Trans. of the Society of Instrument and Contr. Engineers (SICE) 29(10), 1241-1243, (1993)(in Japanese).
  11. [11] K. Kawamura, R. A. Peters II, D. M. Wilkes, W. A. Alford, and T. E. Rogers, “ISAC: Foundations in Human-Humanoid Interaction,” IEEE Intelligent Systems, July / August 2000.
  12. [12] Kingsley, D. A., Quinn, R. D. Ritzmann, R. E., “A Cockroach Inspired Robot With Artificial Muscles,” International Symposium on Adaptive Motion of Animals and Machines (AMAM 2003), Kyoto, Japan.
  13. [13] T. KAGAWA, T. FUJITA and K. KAWASHIMA, “Modeling and Designing a Power Assist Circuit using Artificial Muscle,” KACC, 121-126, 1993.
  14. [14] D. G. Caldwell, G. A. M. Cerda and M. Goodwin, “Control of Pneumatic Muscle Actuators,” IEEE Control Systems, 40-48, 1995
  15. [15] T. Noritsugu, Y. Tsuji, K. Ito, “Improvement of Control Performance of Pneumatic Rubber Artificial Muscle Manipulator by Using Electroreological Fluid Damper,” Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, v4 1999, IV-788/IV-793, 1999.
  16. [16] M. Cerda, G. A. Bowler, C. J. Caldwell, D. G. Caldwell, “Adaptive Position Control of Antagonistic Pneumatic Muscle Actuators,” IEEE International Conference on Intelligent Robots and Systems, v1 1995, 378-383, 1995.
  17. [17] Kutz, Ronald, Vincent Hayward, “Multiple-Goal Kinematic Optimization of a Parallel Spherical Mechanism with Actuator Redundancy,” IEEE Trans. of Robotics and Automation, 8(5), 644-651, 1992.
  18. [18] S. Kawamura, K. Miyata, H. Hanafusa, K. Ishida, “PI type Hierarchical Feedback Control Scheme for Pneumatic Robots,” Proc. IEEE Int. Conf. on Robotics and Automation, 1853/1858, 1989.

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

Copyright© 2004 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Oct. 11, 2024