Development of Magnetic Recording to GOV-Rope

Hisaya Tanaka; Nobuyuki Sudou; Hideto Ide; Masafumi Uchida

doi:10.20965/jrm.2000.p0453

single-rb.php

« previous

JRM Vol.12 No.4 pp. 453-458

doi: 10.20965/jrm.2000.p0453

(2000)

Paper:

Views over last 60 days: 301

Development of Magnetic Recording to GOV-Rope

Hisaya Tanaka^, Nobuyuki Sudou^, Hideto Ide^* and Masafumi Uchida^**

^*Aoyama Gakuin University

^**Wakayama University

Received:

March 7, 2000

Accepted:

April 10, 2000

Published:

August 20, 2000

Keywords:

Elevators, GOV- Rope, Magnetic recording

Abstract

The governor rope of elevators is marked with paint corresponding to each floor level. The trouble has been that the mark fades away in a few months in highspeed elevators or those with high working ratios. In this paper, we propose magnetic marking on steel rope to take the place of paint marking. We also developed a recording unit. We report magnetic recording and reproduction on the governor rope.

Cite this article as:

H. Tanaka, N. Sudou, H. Ide, and M. Uchida, “Development of Magnetic Recording to GOV-Rope,” J. Robot. Mechatron., Vol.12 No.4, pp. 453-458, 2000.

Data files:

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

Development of Magnetic Recording to GOV-Rope

Hisaya Tanaka*, Nobuyuki Sudou*, Hideto Ide* and Masafumi Uchida**

Hisaya Tanaka^, Nobuyuki Sudou^, Hideto Ide^* and Masafumi Uchida^**