JDR Vol.13 No.1 pp. 14-21
doi: 10.20965/jdr.2018.p0014


Flood Hazard Assessment of Bago River Basin, Myanmar

Win Win Zin*1,†, Akiyuki Kawasaki*2, Wataru Takeuchi*3, Zin Mar Lar Tin San*1, Kyaw Zaya Htun*4, Thet Hnin Aye*1, and Shelly Win*1

*1Department of Civil Engineering, Yangon Technological University
Gyogone, Insein Road, 11011 Yangon, Myanmar

Corresponding author

*2Department of Civil Engineering, The University of Tokyo, Tokyo, Japan

*3Institute of Industrial Science, The University of Tokyo, Tokyo, Japan

*4Remote Sensing and GIS Research Centre, Yangon Technological University, Yangon, Myanmar

September 12, 2017
February 14, 2018
February 20, 2018
Bago river basin, flood hazard map, disaster risk management

Flood hazard mapping is an effective non-structural measure for sustainable urban planning, protecting human properties, lives, and disaster risk reduction. In this study, flood hazard assessment for the Bago river basin was performed. The flood inundation map of the Bago river basin was developed by coupling a hydrological and hydraulic model with geographical information systems. Flood hazard maps with different return periods were developed. The flood hazard map can be utilized to enhance the effectiveness of disaster risk management activities.

  1. [1] A. K. Jha, R. Bloch and J. Lamond, “Cities and flooding: a guide to integrated urban flood risk management for the 21st Century,” Washington, DC: World Bank, 2012.
  2. [2] A. Aitsi-Selmi, V. Murray, C. Wannous, C. Dickinson, D. Johnston, A. Kawasaki, A.-S. Stevance, T. Yeung et al., “Reflections on a science and technology agenda for 21st century disaster risk reduction. Based on the scientific content of the 2016 UNISDR Science and Technology Conference on the Implementation of the Sendai Framework for Disaster Risk Reduction 2015–2030,” Int. J. of Disaster Risk Science, Vol.7, No.1, pp. 1-29, 2016.
  3. [3] W. Z. Win, A. Kawasaki, and S. Win, “River flood inundation mapping in the Bago River Basin, Myanmar,” Hydrological Research Letters, Vol.9, No.4, pp. 97-102, 2015.
  4. [4] A. Kawasaki, N. Ichihara, Y. Ochii, R. A. Acierto, A. Kodaka, and W. Z. Win, “Disaster response and river infrastructure management during the 2015 Myanmar floods: a case in the Bago River Basin,” Int. J. of Disaster Risk Reduction, Vol.24, pp. 151-159, 2017a.
  5. [5] S. S. Bhagabati and A. Kawasaki, “Consideration of the rainfall-runoff-inundation (RRI) model for flood mapping in a deltaic area of Myanmar,” Hydrological Research Letters, Vol.11, No.3, pp. 155-160, 2017.
  6. [6] A. Kawasaki, A. Yamamoto, P. Koudelova, R. A. Acierto, T. Nemoto, M. Kitsuregawa, and T. Koike, “Data Integration and Analysis System (DIAS) Contributing to Climate Change Analysis and Disaster Risk Reduction,” Data Science J., Vol.16, No.41, pp. 1-17, 2017b.
  7. [7] P. L. Lazaridou, E. I. Daniil, S. N. Michas, P. N. Papanicolaou, and L. S. Lazarides, “Integrated environmental and hydraulic design of Xerias river, Corinthos, Greece, training works,” Water Air Soil Pollut. Focus 4, pp. 319-330, 2004.
  8. [8] A. Efstratiadis, A. D. Koussi, D. Koutsoyiannis, and N. Mamassis, “Flood design recipes vs. reality: can predictions for ungauged basins be trusted?,” Nat. Hazards Earth Syst. Sci., Vol.14, pp. 1417-1428, 2014.
  9. [9] G. Salvatore, P. Andrea, A. Ettore, and Fernando Nardi, “Flood mapping in ungagged basins using fully continuous hydrologic-hydraulic modeling,” J. Hydrol., Vol.487, pp. 39-47, 2013.
  10. [10] D. Gilles, N. Young, H. Schroeder, J. Piotrowski, and Y. J. Chang, “Inundation mapping initiatives of the iowa flood center: statewide coverage and detailed urban flooding analysis,” Water, Vol.4, pp. 85-106, 2012.
  11. [11] C. C. Sampson, T. J. Fewtrell, A. Duncan, K. Shaad, M. S. Horritt, P. D. Bates, “Use of terrestrial laser scanning data to drive decimetric resolution urban inundation models,” Advances in Water Resources, Vol.41, pp. 1-17, 2012.
  12. [12] J. E. Nash and J. V. Sutcliffe, “River flow forecasting through conceptual models, Part 1. A discussion of principles,” J. of Hydrology, Vol.10, pp. 282-290, 1970.
  13. [13] P. D. Bates and A. P. J. De Roo, “A simple raster-based model for flood inundation simulation,” J. Hydrol., Vol.236, No.1, pp. 54-77, 2000.
  14. [14] D. Dutta, J. Alam, K. Umeda, M. Hayashi, and S. Hironaka, “A two-dimensional hydrodynamic model for flood inundation simulation: a case study in the lower Mekong river basin,” Hydrol. Process., Vol.21, pp. 1223-1237, 2007.
  15. [15] F. Dottori and E. Todini, “A 2D flood inundation model based on cellular automata approach. In: Barcelona,” J. Carrera (Ed.), XVIII Int. Conf. on Water Resources CMWR 2010, 2010.
  16. [16] M. S. Horritt and P.D. Bates, “Evaluation of 1D and 2D numerical models for predicting river flood inundation,” J. Hydrol., Vol.268, No.1, pp. 87-99, 2002.
  17. [17] A. C. Cook, “Comparison of one-dimensional hec-ras with two-dimensional feswms model in flood inundation mapping,” PhD Diss. Purdue University, West Lafayette, 2008.
  18. [18] J. C. Neal, T. J. Fewtrell, P. D. Bates, and N. G. Wright, “A comparison of three parallelisation methods for 2D flood inundation models,” Environ Model Soft., Vol.25, No.4, pp. 398-411, 2010.
  19. [19] A. Cook and V. Merwade, “Effect of topographic data, geometric configuration and modeling approach on flood inundation mapping,” J. Hydrol., Vol.377, Nos.1–2, pp. 131–142, 2009.
  20. [20] A. Casas, G. Benito, V. R. Thorndycraft, and M. Rico, “The topographic data source of digital terrain models as a key element in the accuracy of hydraulic flood modelling,” Earth Surf. Process Land, Vol.31, No.4, pp. 444-456, 2006.
  21. [21] J. C. Neal, I. Villanueva, N. Wright, T. Willis, T. Fewtrell, and P.D. Bates, “How much physical complexity is needed to model flood inundation ?” Hydrol. Process, Vol.26, pp. 2264-2282, 2012.
  22. [22] M. S. Horritt, G. Di Baldassarre, P. D. Bates, and A. Brath, “Comparing the performance of a 2-D finite element and a 2-D finite volume model of floodplain inundation using airborne SAR imagery,” Hydrol. Process, Vol.21, pp. 2745-2759, 2007.
  23. [23] G. Di Baldassarre, A. Castellarin, A. Montanari, and A. Brath, “Probability weighted hazard maps for comparing different flood risk management strategies: a case study,” Nat. Hazards, Vol.50, No.3, pp. 479-496, 2009.
  24. [24] P. Dimitriadis, A. Tegos, A. Oikonomou, V. Pagana. A. Koukouvinos, N. Mamassis, and D. Koutsoyianni, “Comparative evaluation of 1D and quasi-2D hydraulic models based on benchmark and real-world applications for uncertainty assessment in flood mapping,” J. Hydrol, Vol.534, pp. 478-492, 2016.
  25. [25] J. A. Cunge, F. M. Holly, and A. Verwey, “Practical aspects of computational river hydraulics,” Monographs and Surveys in Water Resources Engineering, Pitman, 1980.
  26. [26] G. W. Brunner, “Theoretical basis for one-dimensional flow calculations,” HEC-RAS, river analysis system, hydraulic reference manual,” version 3.1.2, Chapter 2, U.S. Army Corps of Engineers, Davis, Calif., 2004.
  27. [27] N. M. Hunter, M. S. Horritt, P. D. Bates, M. D. Wilson, and M. G. Werner, “An adaptive time step solution for raster-based storage cell modelling of floodplain inundation,” Adv. Water Resour., Vol.28, No.9, pp. 975-991, 2005.
  28. [28] J. M. Bravo, D. Allasia, A. R. Paz, W. Collischonn, and C. E. M. Tucci, “Coupled Hydrologic-Hydraulic Modeling of the Upper Paraguay River Basin,” J. Hydrol. Eng., Vol.17, No.5, pp. 635-646, 2012.
  29. [29] V. Merwade, F. Olivera, M. Arabi, and S. Edleman, “Uncertainty in Flood Inundation Mapping: Current Issues and Future Directions,” J. Hydrol. Eng, Vol.13, No.7, pp. 608-620, 2008.
  30. [30] Y. Lian, I.-C. Chan, J. Singh, and M. Demissie, “Coupling of hydrologic and hydraulic models for the Illinois River Basin,” J. Hydrol, Vol.344, pp. 210-222, 2007.
  31. [31] M. Montanari, R. Hostache, P. Matgen, G. Schumann, L. Pfister, and L. Hoffmann, “Calibration and sequential updating of a coupled hydrologic-hydraulic model using remote sensing-derived water stages,” Hydrol. Earth Syst. Sci., Vol.13, pp. 367-380, 2009.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, IE9,10,11, Opera.

Last updated on Mar. 16, 2018