single-au.php

IJAT Vol.16 No.1 pp. 12-20
doi: 10.20965/ijat.2022.p0012
(2022)

Paper:

Evaluation of the Relationship Among Dressing Conditions Using Prismatic Dresser, Dressing Resistance, and Grinding Characteristics

Gen Uchida*,†, Takazo Yamada*, Kouichi Ichihara**, Makoto Harada**, and Tatsuya Kohara**

*College of Science and Technology, Nihon University
1-8-14 Kanda-surugadai, Chiyoda-ku, Tokyo 101-8308, Japan

Corresponding author

**Sumitomo Heavy Industries, Ltd., Yokosuka, Japan

Received:
June 6, 2021
Accepted:
September 1, 2021
Published:
January 5, 2022
Keywords:
grinding wheel, prismatic dresser, ground surface roughness, grinding resistance, dressing resistance
Abstract

In the grinding process, the grinding wheel surface condition changes depending on the dressing conditions, which affects the ground surface roughness and grinding resistance. Several studies have been reported on the practical application of dressing using prismatic dressers in recent years. However, only a few studies that quantitatively evaluate the effects of differences in dressing conditions using prismatic dresser on the ground surface roughness and grinding resistance have been reported. Thus, this study aims to evaluate quantitatively the effect of the difference in dressing conditions using the prismatic dresser on the ground surface roughness and grinding resistance by focusing on the dressing resistance. In the experiment, dressing is performed by changing the dressing lead and the depth of dressing cut with a prismatic dresser, and the ground surface roughness and grinding resistance are measured. Consequently, by increasing the dressing lead and the depth of dressing cut, the ground surface roughness increased, and the grinding resistance decreased. This phenomenon was caused by the increase in dressing resistance when the dressing lead and the depth of dressing cut were increased, which caused a change in the grinding wheel surface condition. Furthermore, the influence of the difference in dressing conditions using the prismatic dresser on the ground surface roughness and grinding resistance can be quantitatively evaluated by using the dressing resistance.

Cite this article as:
G. Uchida, T. Yamada, K. Ichihara, M. Harada, and T. Kohara, “Evaluation of the Relationship Among Dressing Conditions Using Prismatic Dresser, Dressing Resistance, and Grinding Characteristics,” Int. J. Automation Technol., Vol.16 No.1, pp. 12-20, 2022.
Data files:
References
  1. [1] U. M. Srivastava, “Review of dressing and truing operations for grinding wheels,” Int. J. Eng. Sci. Technol., Vol.5, No.1, pp. 8-19, 2013.
  2. [2] R. S. Hahn, “Effect of wheel-work conformity in precision grinding,” Trans. of ASME, Vol.7, No.8, 1325, 1955.
  3. [3] M. Hasegawa and M. Kokubu, “Study on the roughness generation of ground surface (3rd Report) – Asymptotic distribution of surface roughness –,” J. Jpn. Soc. Precis. Eng., Vol.45, No.4, pp. 397-403, 1979 (in Japanese).
  4. [4] K. Ono, “Studies on grinding – On the grinding force –,” J. Jpn. Soc. Mech. Eng., Vol.18, No.74, pp. 15-20, 1952 (in Japanese).
  5. [5] B. Linke, “Dressing process model for vitrified bonded grinding wheels,” CIRP Annals, Vol.57, No.1, pp. 345-348, 2008.
  6. [6] J. Badger, S. Murphy, and G. E. O’Donnell, “Acoustic emission in dressing of grinding wheels: AE intensity, dressing energy, and quantification of dressing sharpness and increase in diamond wear-flat size,” Int. J. Mach. Tool Manu., Vol.125, pp. 11-19, 2018.
  7. [7] K. Wegener, H. W. Hoffmeister, B. Karpuschewski, F. Kuster, W. C. Hahmann, and M. Rabiey, “Conditioning and monitoring of grinding wheels,” CIRP Annals, Vol.60, No.2, pp. 757-777, 2011.
  8. [8] S. J. Pande and G. K. Lal, “Effect of dressing on grinding wheel performance,” Int. J. Mach. Tool Des. Res., Vol.19, No.3, pp. 171-179, 1979.
  9. [9] T. C. Buttery, A. Statham, J. B. Percival, and M. S. Hamed, “Some effects of dressing on grinding performance,” Wear, Vol.55, No.2, pp. 195-219, 1979.
  10. [10] S. J. Pande and G. K. Lal, “The influence of the dressing depth of cut on the performance of a single point diamond dressed alumina grinding wheel,” Int. J. Mach. Tool Des. Res., Vol.12, No.4, pp. 267-279, 1972.
  11. [11] H. Sakamoto and S. Shimizu, “Generation process of cutting-edge distribution on grinding wheel with single-point diamond dressing,” J. Jpn. Soc. Abras. Technol., Vol.55, No.8, pp. 487-492, 2011 (in Japanese).
  12. [12] ISO 25178-6:2010, “Geometrical product specifications (GPS) – Surface texture: Areal – Part 6: Classification of methods for measuring surface texture,” 2010.
  13. [13] K. Miura and A. Nose, “Point autofocus instruments,” Optical Measurement of Surface Topography, pp. 107-129, 2011.
  14. [14] G. Uchida, T. Yamada, K. Miura, and H. S. Lee, “Measurement of grinding wheel surface shape by measured focus position recalculation method,” J. Jpn. Soc. Abras. Technol., Vol.64, No.3, pp. 140-145, 2020 (in Japanese).
  15. [15] G. Uchida, T. Yamada, K. Ichihara, M. Harada, K. Miura, and H. S. Lee, “Evaluation of grinding wheel surface shape on difference multiple helical dressing condition,” Int. J. Automation Technol., Vol.15, No.1, pp. 57-64, 2021.
  16. [16] G. Uchida, T. Yamada, K. Miura, and H. S. Lee, “Quantitative evaluation of grinding wheel surface condition and effect of dressing condition on characteristics of grinding,” J. Jpn. Soc. Mech. Eng., Vol.86, No.892, doi: 10.1299/transjsme.20-00284, 2011 (in Japanese).
  17. [17] M. A. K. Chowdhury, A. U. Rehman, M. S. Uddin, M. Alkahtani, and S. Anwar, “Multi criteria optimization approach for dressing of vitrified grinding wheel,” Technical Gazette, Vol.25, No.2, pp. 256-265, 2018.
  18. [18] A. Kubo, J. Tamaki, A. M. M. S. Ullah, and Y. Ozaki, “Computer-aided simulation of dressing and visualization of the dressed surface of grinding wheel – Prismatic diamond rotary dresser –,” J. Jpn. Soc. Abras. Technol., Vol.58, No.4, pp. 253-259, 2014 (in Japanese).
  19. [19] A. Kubo, J. Tamaki, and A. M. M. S. Ullah, “Kinematic analysis of dressing process using prismatic diamond rotary dresser,” J. Jpn. Soc. Abras. Technol., Vol.59, No.4, pp. 197-204, 2015 (in Japanese).
  20. [20] T. Akiyama, Y. Ikuse, and K. Unno, “Development of new rotary ultrasonic dressing equipment and evaluation of its effectiveness (1st Report),” J. Jpn. Soc. Precis. Eng., Vol.68, No.6, pp. 827-832, 2002 (in Japanese).
  21. [21] M. Yokogawa and Y. Furukawa, “Dressing performance of prismatic monocrystalline diamond dresser,” J. Jpn. Soc. Precis. Eng., Vol.60, No.6, pp. 803-807, 1994 (in Japanese).
  22. [22] M. Yokogawa, “Prismatic diamond dresser,” J. Jpn. Soc. Abras. Technol., Vol.39, No.5, 240, 1995 (in Japanese).
  23. [23] T. Nakajima, S. Tsukamoto, M. Yoshikawa, K. Takehara, and S. Yokomizo, “Distribution of spring constant of grain mounting and displacement behaviors of abrasive grain on vitrified wheel,” J. Jpn. Soc. Precis. Eng., Vol.60, No.10, pp. 1490-1494, 1994 (in Japanese).

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Oct. 01, 2024