1/N Machine System for the Lean Factory

Katsuhiko Sugito

doi:10.20965/ijat.2017.p0623

single-au.php

« previous

IJAT Vol.11 No.4 pp. 623-628

doi: 10.20965/ijat.2017.p0623

(2017)

Development Report:

Views over last 60 days: 793

1/N Machine System for the Lean Factory

Katsuhiko Sugito^†

DENSO Corporation
1-1 Showa-cho, Kariya-shi, Aichi 448-8661, Japan

^†Corresponding author

Received:

November 5, 2016

Accepted:

March 25, 2017

Online released:

June 29, 2017

Published:

July 5, 2017

Keywords:

lean production, synchronized production, die casting

Abstract

To succeed in a global business environment, the competitiveness of both products and manufacturing is inevitable. Therefore, the leanness of entire supply chains is considered necessary. A 1/N machine that was consistently synchronized with the assembly process was developed and introduced in a factory to alleviate bottlenecks in machining processes.

Cite this article as:

K. Sugito, “1/N Machine System for the Lean Factory,” Int. J. Automation Technol., Vol.11 No.4, pp. 623-628, 2017.

Data files:

References

[1] Y. Kuroda, H. Fujii, K. Yamada, H. Hashimoto, and K. Mori, “The development of syncronized and lean production system by 1/N machines,” J. of the JSTP, Vol.55, No.647, pp. 1053-1057, 2014.
[2] M. Ishiguro, Y. Nishimura, H. Hisano, H. Morita, and M. Minesaki, “High speed insert moding system,” Seikei-Kakou, Vol.23, No.10, pp. 610-613, 2011.

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

[1] [1] Y. Kuroda, H. Fujii, K. Yamada, H. Hashimoto, and K. Mori, “The development of syncronized and lean production system by 1/N machines,” J. of the JSTP, Vol.55, No.647, pp. 1053-1057, 2014.

[2] [2] M. Ishiguro, Y. Nishimura, H. Hisano, H. Morita, and M. Minesaki, “High speed insert moding system,” Seikei-Kakou, Vol.23, No.10, pp. 610-613, 2011.

1/N Machine System for the Lean Factory

Katsuhiko Sugito†

Katsuhiko Sugito^†