Paper:
Study of a Precision Pneumatic Positioning Device Using PZT Dither
Yung-Tien Liu*, Kuo-Ming Chang**, and Huang-Ren Lee*
*Department of Mechanical and Automation Engineering, National Kaohsiung, First University of Science and Technology, 2 Jhuoyue Rd., Nanzih, Kaohsiung 811, Taiwan, R.O.C.
**Department of Mechanical Engineering, National Kaohsiung, University of Applied Sciences, 415 Chien Kung Rd., Sanmin, Kaohsiung 807, Taiwan, R.O.C.
- [1] J. Song and Y. Ishida, “A Robust Sliding Mode Control for Pneumatic Servo Systems,” Int. J. of Engineering Science, Vol.35, pp. 711-723, 1997.
- [2] M. Taghizadeh, A. Ghaffari, and F. Najafi, “Improving Dynamic Performances of PWM-driven Servo-pneumatic Systems via a Novel Pneumatic Circuit,” ISA Transactions, Vol.48, pp. 512-518, 2009.
- [3] M.-C. Shih and M.-A. Ma, “Position Control of a Pneumatic Cylinder using Fuzzy PWM Control Method,” Mechatronics, Vol.8, pp. 241-253, 1998.
- [4] M. Parnichkun and C. Ngaecharoenkul, “Kinematics Control of a Pneumatic System by Hybrid Fuzzy PID,” Mechatronics, Vol.11, pp. 1001-1023, 2001.
- [5] M. Kadotani, T. Kitagawa et al., “Development of Pneumatic Servo Bearing Actuator for Nanometer Positioning,” Int. J. of Automation Technology, Vol.3, pp. 249-256, 2009.
- [6] Y.-T. Liu, C.-H. Lee, and R.-F. Fung, “A Pneumatic Positioning Device Coupled with Piezoelectric Self-moving Mechanism,” Asian J. of Control, Vol.6, No.2, pp. 199-207, 2004.
- [7] M.-H. Chiang, C.-C. Chen, and D.-N. Tsuo, “Large Stroke and High Precision Pneumatic-Piezoelectric Hybrid Positioning Control using Adaptive Discrete Variable Structure Control,” Mechatronics, Vol.15, pp. 523-545, 2005.
- [8] Y.-T. Liu and C.-C. Jiang, “Pneumatic Actuating Device with Nanopositioning Ability Utilizing PZT Impact Force Coupled with Differential Pressure,” Precision Engineering, Vol.31, pp. 293-303, 2007.
- [9] A. A. Pervozvanski and C. Canudas-de-Wit, “Asymptotic Analysis of the Dither Effect in Systems with Friction,” Automatica, Vol.38, pp. 105-113, 2002.
- [10] T. Hägglund, “A Friction Compensator for Pneumatic Control Valves,” J. of Process Control, Vol.12, pp. 897-904, 2002.
- [11] Y.-T. Liu, C.-C. Wang et al., “Characteristic Study on Precision Pneumatic Actuating Device using Piezoelectric Dither,” Proc. of the 2nd Int. Forum on Systems and Mechatronics, pp. 37-42, 2007.
- [12] M.-C. Shih and S.-I. Tseng, “Identification and Position Control of a Servo Pneumatic Cylinder,” Control Eng. Practice, Vol.3, No.9, pp. 1285-1290, 1995.
This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.