single-au.php

IJAT Vol.5 No.4 pp. 594-600
doi: 10.20965/ijat.2011.p0594
(2011)

Paper:

A Study on Semi-Active Magnetic Bearing Position-Controlled by Piezoelectric Actuators

Jung-Ho Park, Hu-Seung Lee, Young-Bog Ham,
and So-Nam Yun

Energy Plant Research Division, Korea Institute of Machinery & Materials, 104 Sinseongno, Yuseong-gu, Daejeon 305-343, Republic of Korea

Received:
March 31, 2011
Accepted:
May 12, 2011
Published:
July 5, 2011
Keywords:
magnetic bearing, piezoelectric actuator, permanent magnet, repulsive force, FEM analysis
Abstract
This paper investigates non-contact hybrid bearings that use permanent magnets for repulsive force and piezoelectric actuators for position-control. A structurally-improved hybrid bearing is presented. First, the concept of the hybrid bearing is briefly introduced along with previous test results. Then, the newly devised bearing with a decreased gap between rotor and stator is designed and analyzed with FEM to optimize the magnetic forces. Finally, a prototype bearing using the proposed mechanism is fabricated and a control method is discussed.
Cite this article as:
J. Park, H. Lee, Y. Ham, and S. Yun, “A Study on Semi-Active Magnetic Bearing Position-Controlled by Piezoelectric Actuators,” Int. J. Automation Technol., Vol.5 No.4, pp. 594-600, 2011.
Data files:
References
  1. [1] J.-H. Park, D.-W. Yun, S.-N. Yun, and Y.-B. Ham, “A Hybrid Magnetic Bearing Using Permanent Magnets and Piezoelectric Actuators,” Proc. of ICMDT, 2009.
  2. [2] Y. Iwata and H. Sato, “Vibration of Rotor in Induction Motor,” Asia-Pacific Vibration Conf. ’97, pp. 242-246, 1997.
  3. [3] Q. Jang, G. Guo, and C. Bi, “Air bearing Spindle Motor for Hard Disk Drives,” Tribology & Lubrication Technology, 2006.
  4. [4] D. J. Clark, M. J. Jansen, and G. T. Montague, “An Overview of Magnetic Bearing Technology for Gas Turbine Engines,” NASA/TM-2004-213177, 2004.
  5. [5] W. Morales, R. Fusaro, and A. Kascak, “Permanent magnetic bearing for spacecraft applications,” Tribology Trans., 2003.
  6. [6] T. Ohji et al., “Permanent Magnet Bearings for Horizontal- and Vertical-Shaft Machines: A Comparative Study,” J. of Applied Physics, 31-8, pp. 4648-4650, 1999.
  7. [7] R. Moser, J. Sandtner, and H. Bleuler, “Optimization of Repulsive Passive Magnetic Bearings,” IEEE Trans. on Magnetics, Vol.42, Issue 8, pp. 2038-2042, 2006.
  8. [8] J. Sandtner and H. Bleuler, “Electrodynamic Passive Magnetic Bearing with Planar Halbach Arrays,” Proc. of the 9th Int. Symp. on Magnetic Bearings, 2004.
  9. [9] H. Isobe and A. Kyusojin, “Development of Active Squeeze Gas Bearing Driven by Piezoelectric Actuators-Construction of Radial Squeeze Gas Bearing and Proposal of Numerical Analysis Technique,” Proc. of the 6th ICMT, pp. 439-444, 2002.
  10. [10] T. Oiwa and R. Suzuki, “Linear Rectangular Air Bearing Based on Squeeze Film Generated by Ultrasonic Oscillation,” Review of Scientific Instruments, Vol.76, 7, pp. 1-7, 2005.
  11. [11] T. Morita, K. Shimizu, M. Hasegawa, K. Oka, and T. Hoguchi, “A Miniaturized Levitation System with Motion Control Using a Piezoelectric Actuator,” IEEE Trans. on Control Systems Technology, Vol.10, No.5, pp. 666-670, 2002.
  12. [12] K. Oka, T. Higuchi, and T. Shiraishi, “Hanging-Type Mag-Lev System with Permanent Magnet Motion Control,” Electrical Engineering in Japan, Vol.133, No.3, pp. 63-70, 2000.
  13. [13] T. Mizuno and M. Aizawa, “Repulsive magnetic bearing stabilized by the motion control of magnets with a piezoelectric actuator,” Int. J. of Applied Electromagnetics and Mechanics,” Vol.13, No.1~4, pp. 155-162, 2002.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Dec. 06, 2024