IJAT Vol.4 No.5 pp. 432-438
doi: 10.20965/ijat.2010.p0432


Surface Inspection of Micro Glass Lens Mold Based on Total Angle Resolved Scattering Characterization

Terutake Hayashi, Yasuhiro Takaya, Naohiro Motoishi,
and Yuki Nakatsuka

Department of Mechanical Engineering, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan

April 15, 2010
July 20, 2010
September 5, 2010
TIS, laser scattering, lens mold, angle resolved scattering
The condition of the lens mold surface becomes worse due to several defects that are caused in the lens production process as the number of lens shots increases. An on-machine quantitative evaluation method is required for the lens mold surface. In this study, we have developed an automated light scattering measurement system that enables 3-D detection of the scattered light in various directions caused by flaws and roughness in order to characterize the surface texture and manufacture a high quality lens. The surface characteristic of the lens mold is classified using the scattered patterns. This paper describes the quantitative evaluation results of the surface nano texture for characterizing the spherical lens mold with varying shot numbers.
Cite this article as:
T. Hayashi, Y. Takaya, N. Motoishi, and Y. Nakatsuka, “Surface Inspection of Micro Glass Lens Mold Based on Total Angle Resolved Scattering Characterization,” Int. J. Automation Technol., Vol.4 No.5, pp. 432-438, 2010.
Data files:
  1. [1] H. Suzuki et al., “Precision Grinding of Aspherical CVD-SiC Molding Die,” Int. J. of The Japan Society for Precision Engineering, 32(1), pp. 25-30, 1998.
  2. [2] M. Saeki, T. Kuriyagawa, and K. Syoji, “Machining of Aspherical Molding Dies Utilizing Parallel Grinding Method,” J. Japan Soc. Prec. Eng., 64(4), pp. 619-623, 1998 (in Japanese).
  3. [3] T. Ha et al., “Size determination of microscratches on silicon oxide wafer surface using scattered light,” Precision engineering, 27(3), pp. 265-272, 2003.
  4. [4] P. Beckman, “The scattering of electromagnetic waves from rough surfaces,” Pergamon Press, p. 30, 1963.
  5. [5] J. Elson, J. Rahn, and J. Bennett, “Relationship of the total integrated scattering from multilayer-coated optics to angle of incidence, polarization, correlation length, and roughness cross-correlation properties,” Appl. Opt., 22, pp. 3207-3219, 1983.
  6. [6] Karl H. Guenther et al., “Surface roughness measurements of low-scatter mirrors and roughness standards,” Applied Optics, 23, 21, pp. 3820-3836, 1984.
  7. [7] T. Ha, T. Miyoshi, Y. Takaya, and S. Takahashi, “Laser Scattering Measurement of Microdefects on Silicon Oxide Wafer,” Key engineering materials, Vol.295-296, pp. 3-8. 2005.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jun. 05, 2023