Top > JRM > Fluid-Structure Interaction Analysis of a Soft Robotic Fish Us ...

single-rb.php

JRM Vol.26 No.5 pp. 638-648
doi: 10.20965/jrm.2014.p0638
(2014)

Paper:

Views over last 60 days: 1,300

Fluid-Structure Interaction Analysis of a Soft Robotic Fish Using Piezoelectric Fiber Composite

Wenjing Zhao, Aiguo Ming, Makoto Shimojo,
Yohei Inoue, and Hiroshi Maekawa

Department of Mechanical Engineering and Intelligent Systems, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu-shi, Tokyo 182-8585, Japan

Received:
March 28, 2014
Accepted:
August 22, 2014
Published:
October 20, 2014
Creative Commons License
Keywords:
biomimetic robotic fish, soft robot, piezoelectric fiber composite (PFC), fluid-structure interaction (FSI), propulsion performance
Abstract
Model of soft robotic fish
Designing a high-performance soft robotic fish requires considering the interaction between the flexible robot structure and surrounding fluid. This paper introduces fluid-structure interaction (FSI) analysis used to enhance the hydrodynamic performance of soft robotic fish using piezoelectric fiber composite (PFC) as the propulsion actuator. The basic FSI analysis scheme for soft robotic fish is presented, then the numerical model of the actuator, robot structure, and surrounding fluid are described based on the FSI analysis scheme. The FSI analysis of the soft robotic fish is performed through these numerical models. To evaluate the effectiveness of FSI analysis, coupling simulation and experimental results are compared. We found that the calculated results of propulsive force and deformation displacement were similar to those for experiments. These results suggest that FSI analysis is useful and is applicable to evaluating propulsion characteristics of the soft robotic fish to improve performance.
Cite this article as:
W. Zhao, A. Ming, M. Shimojo, Y. Inoue, and H. Maekawa, “Fluid-Structure Interaction Analysis of a Soft Robotic Fish Using Piezoelectric Fiber Composite,” J. Robot. Mechatron., Vol.26 No.5, pp. 638-648, 2014.
Data files:
References
  1. [1] E. Kim and Y. Youm, “Design and dynamic analysis of fish robot: PoTuna,” Proc. of IEEE Int. Conf. on Robotics and Automation, pp. 4887-4892, 2004.
  2. [2] J.M. Anderson, “The vorticity control unmanned undersea vehicle,” Proc. of Int. Symposium on Seawater Drag Reduction, pp. 479-483, 1998.
  3. [3] X. Deng and S. Avadhanula, “Biomimetic micro underwater vehicle with oscillating fin propulsion: system design and force measurement,” Proc. of IEEE Int. Conf. on Robotics and Automation, pp. 3312-3317, 2005.
  4. [4] J. M. Kumph, “Maneuvering of a robotic pike,” M. S. Thesis, Massachusetts Institute of Technology, USA, 2000.
  5. [5] M. S. Triantafyllou, A. H. Techet, and F. S. Hover, “Review of experiment work in biomimetic foils,” IEEE J. of Oceanic Engineering, Vol.29, No.3, pp. 585-593, 2004.
  6. [6] K. H. Low, C.W. Chong, and C. Zhou, “Performance study of a fish robot propelled by a flexible caudal fin,” Proc. of IEEE Int. Conf. on Robotics and Automation, pp. 90-95, 2010.
  7. [7] X. Tan, M. Carpenter, J. Thon, and F. Alequin-Ramos, “Analytical modeling and experimental studies of robotic fish turning,” Proc. of IEEE Int. Conf. on Robotics and Automation, pp. 102-108, 2010.
  8. [8] A. Crespi, A. Badertscher, A. Guignard, and A. J. Iispeert, “Amphi-Bot I: an amphibious snake-like robot,” Robotics and Autonomous Systems, Vol.50, pp. 163-175, 2005.
  9. [9] H. Hu, “Biologically inspired design of autonomous robotic fish at Essex,” Proc. of IEEE SMC UK-RI Chapter Conf. on Advances in Cybernetic Systems, pp. 1-8, 2006.
  10. [10] S. Hirose and E. F. Fukushima, “Snakes and strings: new robotic components for rescue operations,” Int. J. of Robotics Research, Vol.23, pp. 341-349, 2004.
  11. [11] M. Mojarrad and M. Shahinpoor, “Biomimetic robotic propulsion using polymeric artificial muscles,” Proc. of IEEE Int. Conf. on Robotics and Automation, pp. 2152-2157, 1997.
  12. [12] Z. Zhang, N. Yamashita, and M. Gondo, “Electrostatically actuated robotic fish: design and control for high-mobility open-loop swimming,” IEEE Trans. on Robotics, Vol.24, No.1, pp. 118-129, 2008.
  13. [13] S. Guo, Y. Ge, L. Li, and S. Liu, “Underwater swimming micro robot using IPMC actuator,” Proc. of IEEE Int. Conf. on Mechatronics and Automation (ICMA), pp. 249-254, 2006.
  14. [14] O. K. Rediniotis, L. N. Wilson, D. C. Lagoudas, and M. M. Khan, “Development of a Shape-Memory-Alloy actuated biomimetic hydrofoil,” J. of Intelligent Material Systems and Structures, Vol.13, No.1, pp. 35-49, 2002.
  15. [15] T. Fukuda and H. Hosokai, “Giant magnetostrictive alloy (GMA) application to micro mobile robot as a micro actuator without power supply cable,” Proc. of IEEE Int. Conf. on Micro Electro Mechanical System (MEMS), pp. 210-215, 1991.
  16. [16] R. B. Williams and D. J. Inman, “An overview of composite actuators with piezoceramic fibers,” Proc. of 20th Int. Modal Analysis Conf., pp. 421-427, 2002.
  17. [17] K. H. Low and A. Willy, “Biomimetic motion planning of an undulating robotic fish fin,” J. of Vibration and Control, Vol.12, No.12, pp. 1337-1359, 2006.
  18. [18] L. Jia and X. Yin, “Passive oscillations of two tandem flexible filaments in a flowing soap film,” Physical review letters, Vol.100, No.22, pp. 1-4, 2008.
  19. [19] D. Xia, J. Liu, W. Cheng, and L. Han, “Numerical simulation of the hydrodynamics of fishlike robot swimming based on converged speed,” J. of Mechanical Engineering, Vol.46, No.1, pp. 48-54, 2010.
  20. [20] T. Y. Wu, “Hydrodynamics of swimming propulsion. Part 1. Swimming of a two-dimensional flexible plate at variable forward speeds in an inviscid fluid,” J. of Fluid Mechanics, Vol.46, No.2, pp. 337-355, 1971.
  21. [21] M. Lighthill, “Large amplitude elongated-body theory of fish locomotion,” Pro. R. Soc. London, Ser. B, Vol.179, pp. 125-138, 1971.
  22. [22] J. N. Newman, “The force on a slender fish-like body,” J. of Fluid Mechanics, Vol.58, No.4, pp. 689-702, 1973.
  23. [23] J. Cheng, L. Zhuang, and B. Tong, “Analysis of swimming three-dimensional waving plates,” J. of Fluid Mechanics, Vol.232, pp. 341-355, 1991.
  24. [24] H. Kagemoto, M. J. Wolfgang, D. K. P. Yue, and M. S. Triantafyllou, “Force and power estimation in fish-like locomotion using a vortex-lattice method,” J. of Fluids Engineering, Vol.122, No.2, pp. 239-253, 2000.
  25. [25] H. Liu and K. Kawachi, “A numerical study of undulatory swimming,” J. Comput. Phys., Vol.155, No.2, pp. 223-247, 1999.
  26. [26] H.-J. Bungartz and M. Schäfer, “Fluid-structure interaction: modelling, simulation, optimization,” Springer-Verlag, 2006.
  27. [27] W. Dettmer and D. Peric, “A computational framework for fluidstructure interaction: finite element formulation and applications,” Computer Methods in Applied Mechanics and Engineering, Vol.195, pp. 5754-5779, 2006.
  28. [28] S. Gong, L. Ren, H. Liu, L. Li, and Z. Zou, “Fluid-solid interaction of rotor blade in last stage of steam turbine,” Thermal Turbine, Vol.36, No.3, pp. 153-157, 2007.
  29. [29] D. Tang, C. Yang, S. Kobayashi, and D. N. Ku, “Effect of a lipid pool on stress/strain distributions in stenotic arteries: 3-D fluid–structure interactions (FSI) models,” J. Biomech. Eng., Vol.126, No.3, pp. 363-370, 2004.
  30. [30] D. Tang, C. Yang, S. Mondal, F. Liu, G. Canton, T. Hatsukami, and C. Yuan, “A negative correlation between human carotid atherosclerotic plaque progression and plaque wall stress: in vivo MRI-based 2D/3D FSI models,” J. Biomech., Vol.41, No.4, pp. 727-736, 2008.
  31. [31] J. Leach, V. Rayz, M. Mofrad, and D. Saloner, “An efficient twostage approach for image-based FSI analysis of atherosclerotic arteries,” Biomech. Model Mechanobiol, Vol.9, No.2, pp. 213-223, 2010.
  32. [32] H.-J. Bungartz, M. Mehl, and M. Schäfer, “Fluid-structure interaction II: modelling, simulation, optimization,” Springer-Verlag, 2010.
  33. [33] H. Schmucker, F. Flemming, and S. Coulson, “Two-way coupled fluid structure interaction simulation of a propeller turbine,” The 25th IAHR Symposium on Hydraulic Machinery and Systems/ IOP Conf. Series: Earth and Environmental Science, Vol.12, No.1, pp. 1-10, 2010.
  34. [34] R. L. Campbell, “Fluid-structure interaction and inverse design simulations for flexible turbomachinery,” Doctoral Dissertation of the Pennsylvania State University, 2010.
  35. [35] M. Hsu and Y. Bazilevs, “Fluid-structure interaction modeling of wind turbines: simulating the full machine,” Computational Mechanics, Vol.50, No.6, pp. 821-833, 2012.
  36. [36] R. B. Williams, “Nonlinear mechanical and actuator characterization of piezoelectric fiber composites,” Doctoral Dissertation of Virginia Polytechnic Institute and State University, 2004.
  37. [37] J. W. High and W. K. Wilkie, “Method of fabricating NASA-standard macro-fiber composite piezoelectric actuators,” NASA/TM-2003-212427, Langley Research Center, Hampton, Virginia, 2003.
  38. [38] ANSYS Inc., “ANSYS theory reference 12.1,” ANSYS Inc., 2009.
  39. [39] I. Borazjani and F. Sotiropoulos, “Numerical investigation of the hydrodynamics of carangiform swimming in the transitional and inertial flow regimes,” J. of Experimental Biology, Vol.211, pp. 1541-1558, 2008.
  40. [40] I. Tanaka and M. Nagai, “Hydrodynamic of resistance and propulsion-learn from the fast swimming ability of aquatic animals,” Ship & Ocean Foundation, pp. 14-19, 1996.
  41. [41]
    Supporting Online Materials:[a] Smart Material, 2012.
    http://www.smart-material.com [Accessed February 2012]

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Apr. 22, 2024