single-mostdl.php

IJAT Most Downloaded Papers, November 2016

This month Last month Vol. No. Title / Authors Keywords
No.1 - Vol.8
No.1
(2014)
In-Process and On-Machine Measurement of Machining Accuracy for Process and Product Quality Management: A Review
Yasuhiro Takaya
in-process measurement, on-machine measurement, manufacturing metrology, machine tools, quality management
No.1 - Vol.9
No.5
(2015)
Determination of Aspect Ratio Limitations, Accuracy and Repeatability of a Laser Line Scanning CMM Probe
Bart Boeckmans, Min Zhang, Frank Welkenhuyzen, and Jean-Pierre Kruth
dimensional metrology, CMM, laser line scanning, accuracy, repeatability
No.1 - Vol.10
No.6
(2016)
Increased Productivity for Redundant Laser Scanners Using an Optimal Trajectory Separation Method
Titus Haas, Maximilian Warhanek, Michael Dietlicher, and Konrad Wegener
redundancy, trajectory separation, set point generation, productivity, laser scanner
No.1 1 Vol.8
No.1
(2014)
Error Calibration for Five-Axis Machine Tools by On-the-Machine Measurement Using a Touch-Trigger Probe
Soichi Ibaraki and Yusuke Ota
five-axis machine tools, touch-trigger probe, geometric errors, error map, error calibration
No.1 - Vol.9
No.4
(2015)
R-Test Analysis Software for Error Calibration of Five-Axis Machine Tools – Application to a Five-Axis Machine Tool with Two Rotary Axes on the Tool Side –
Soichi Ibaraki, Yu Nagai, Hisashi Otsubo, Yasutaka Sakai, Shigeki Morimoto, and Yosuke Miyazaki
Metrology, R-test, five-axis machine tools, calibration, location error, error motion, geometric error.
No.1 - Vol.10
No.4
(2016)
Age of Compensation – Challenge and Chance for Machine Tool Industry
Konrad Wegener, Sascha Weikert, and Josef Mayr
machine tools, accuracy, calibration, compensation, modelling, control
No.1 - Vol.10
No.6
(2016)
Experimental Analysis of Glass Drilling with Ultrashort Pulse Lasers
Rin Shinomoto, Yusuke Ito, Toru Kizaki, Kentaro Tatsukoshi, Yasuji Fukasawa, Keisuke Nagato, Naohiko Sugita, and Mamoru Mitsuishi
ultrashort pulse laser, laser processing, glass
No.1 - Vol.10
No.6
(2016)
Minimizing Burrs and Defects on Microstructures with Laser Assisted Micromachining Technology
Shaolin Xu, Shinsaku Osawa, Ryuichi Kobayashi, Keita Shimada, Masayoshi Mizutani, and Tsunemoto Kuriyagawa
laser assisted micromachining, burrs and defects, microstructures, electroless NiP plating
No.1 - Vol.10
No.6
(2016)
Effect of Different Solvents on Cu Micropatterns Formed via Femtosecond Laser Reduction Patterning
Mizue Mizoshiri, Shun Arakane, Junpei Sakurai, and Seiichi Hata
femtosecond laser, CuO nanoparticles, reduction, solvent, micro-temperature sensor

Count period : November 1-30, 2016

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Oct. 15, 2021