Image Detection of Seam Line for Laser Welding Robot
Akihiko Matsushita*, Takafumi Morishita*,
Shun’ichi Kaneko*, Hitoshi Ohfuji**,
and Kaoru Fukuda**
*Graduate School of Information Science and Technology, Hokkaido University, North 14 West 9, Sapporo 060-0814, Japan
**Sanko Steel, 3-515-1 Zenibako, Otaru 047-0261, Japan
-  A. Matsushita, M. Yamanaka, S. Kaneko, H. Ohfuji, and K. Fukuda, “Basic Image Measurement for Laser Welding Robot Motion Control,” Int. J. of Automation Technology, Vol.3, No.2, pp. 136-143, 2009.
-  A. Matsushita, T. Hokari, S. Kaneko, H. Ohfuji, and K. Fukuda, “Image Measurement on Curvature around Seam Line for Motion Control of LaserWelding Robot,” Int. J. of Automation Technology, Vol.4, No.6, pp. 536-541, 2010.
-  M. Yamanaka, A. Matsushita et al., “A Graphical Measurement Method for Motion Control of YAG Laser Welding Robot,” Third Asia Int. Symposium on Mechatronics (AISM) in Sapporo, p. 128, Aug. 2008.
-  A. Matsushita, T. Morishita et al., “Image Detection of Seam Line for Laser Welding Robot,” 4th Asia Int. Symposium on Mechatronics (AISM), pp. 373-378, 2010.
-  K. Fukuda, H. Ohfuji et al., “Development of vision sensor for LASER welding (The 2nd report),” Sensing accuracy of welding points on curved surfaces, 2010 JSPE Autumn Meeting, pp. 623-624, Sep. 2009 (in Japanese).
-  N. Torii, Y. Ashida et al., “Application of The Laser Vision System to The LaserWelding,” J. of Japan Laser Processing Society, Vol.13, No.4, pp. 240-244, 2006 (in Japanese).
-  W. Wolf and K. Amano, “Process Monitoring for Laser Welding Applications,” J. of Japan Laser Processing Society, Vol.13, No.4, pp. 233-239, 2006.
-  Y. Kawahito, M. Kito et al., “Adaptive Gap Control in ButtWelding with a Pulsed YAG Laser,” Trans. of JWRI, Vol.36, No.2, pp. 5-10, 2007.
-  D. Iakovou, R. G. K. M Aarts, and J. Meijer, “Integrated sensors for robotic laser welding,” Proc. of the Third Int. WLT-Conf. on Lasers in Manufacturing 2005, pp. 1-6, Munich, June 2005.
-  Z. Fang, D. Xu, and M. Tan, “Visual seam tracking system for butt weld of thin plate,” The Int. J. of Advanced Manufacturing Technology. Vol.49, pp. 519-526, 2010.
This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.
Copyright© 2011 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.