A Study on the Mechanism and Locomotion Strategy for New Snake-Like Robot Active Cord Mechanism – Slime model 1 ACM-S1
Saori Sugita*, Kazunori Ogami**, Guarnieri Michele*,
Shigeo Hirose*, and Kensuke Takita***
*Department of Mechanical & Aerospace Engineering, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8552, Japan
**Canon Inc. Robot Development Propulsion Project, 70-1 Yanagi-cho, Saiwai-ku, Kawasaki-shi, Kanagawa 212-8602, Japan
***HiBot Corporation, 201 University Corporate Relations Bldg., 2-10-1 Kamata, Ota-ku, Tokyo 144-0052, Japan
This paper presents ACM-S1 (Active Cord Mechanism – Slime model 1), a snake-like robot. Conventional snake-like robots have difficulty negotiation uneven ground. In this paper, we propose “a bending and expanding joint unit” which has three degrees of freedom (3DOF) in inchworm/angleworm-like motion and has been developed to solve this problem. The ACM-S1 we developed is composed of a series of these joint units. Experiments conducted to evaluate ACM-S1’s performance demonstrate the effectiveness of inchworm motion over uneven ground and of angleworm motion over flat, smooth ground.
Shigeo Hirose, and Kensuke Takita, “A Study on the Mechanism and Locomotion Strategy for New Snake-Like Robot Active Cord Mechanism – Slime model 1 ACM-S1,” J. Robot. Mechatron., Vol.20, No.2, pp. 302-310, 2008.
-  S. Hirose, “Biologically Inspired Robots (Snake-like Locomotor and Manipulator),” Oxford University Press, 1987.
-  M. Mori and S. Hirose, “Development of Active Cord Mechanism ACM-R3 with Agile 3D mobility,” Proc. Of IROS, pp. 1552-1557, 2001.
-  M. Mori and S. Hirose,“Three-dimentional serpentine motion and lateral rolling by Active Cord Mechanism ACM-R3,” Proc. Of IROS, pp. 829-834, 2002.
-  M. Mori, H. Yamada, and S. Hirose, “Design and development of Active Cord Mechanism ‘ACM-R3’ and its 3-dimentional locomotion control,” The Journal of Robotics Society Japan, Vol. 23, No.7, 2005.
-  M. Mori and S. Hirose, “ Locomotion of 3D Snake-Like Robots –Shifting and Rolling Control of Active Cord Mechanism ACMR3–,” Journal of Robotics and Mechatronics, Vol.18, No. 5, 2006.
-  H. Ohno and S. Hirose, “Design of Slim Slime Robot and its Gait of Locomotion,” Proc. Of IROS, pp. 707-715, 2001.
-  H. Yamada, S. Chigisaki, M. Mori, K. Takita, K. Ogami, and S. Hirose, “Development of Amphibious Snake-like Robot ACM-R5,” Proc. Of 36th Int. Symposium on Robotics, pp. TH3C4, 2005.
-  A. Crespi, A. Badertscher, A. Guiqnard, A. J. Ijspeert, “Swimming and Crawring with an Amphibious Snake Robot,” Proc. of ICRA, pp. 3024-3028, 2005.
-  G. S. Chirikjian and J. W. Burdick, “Design and Experiments with a 30 DOF Robot,” Proc. Of ICRA, pp. 113-119, 1993.
-  G. S. Chirikjian and J. W. Burdick, “The Kinematics of Hyperredundant Robot Locomotion,” Proc. Of ICRA, pp. 781-793, 1995.
This article is published under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyright© 2008 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.