Development of High Precision Winding Machine for Toroidal Coil

Takashi Kawamura; Masayasu Shimaru; Masaru Nakazawa

doi:10.20965/jrm.2001.p0064

single-rb.php

« previous

JRM Vol.13 No.1 pp. 64-67

doi: 10.20965/jrm.2001.p0064

(2001)

Paper:

Views over last 60 days: 417

Development of High Precision Winding Machine for Toroidal Coil

Takashi Kawamura, Masayasu Shimaru, and Masaru Nakazawa

Shinshu University, 3-15-1 Tokida, Ueda-shi Nagano, Japan

Received:

November 1, 2000

Accepted:

January 11, 2001

Published:

February 20, 2001

Keywords:

toroidal coil, core, winding machine, kink prevention, tension control, mechatronics

Abstract

This paper reports development of high precision winding machine for toroidal coil. New winding mechanism was proposed. This mechanism makes continuous winding for toroidal core and its automation possible. Kink prevention equipment is designed to avoid kinks while winding process. Then high precision winding machine was realized by these improvements. This mechanism gives ability of tension control for this winding machine. That is required for small size core winding and/or very thin wire widing.

Cite this article as:

T. Kawamura, M. Shimaru, and M. Nakazawa, “Development of High Precision Winding Machine for Toroidal Coil,” J. Robot. Mechatron., Vol.13 No.1, pp. 64-67, 2001.

Data files:

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.