Development of a New Tsunami Generator for Multiple Sources
Ujikawa Open Laboratory, Kyoto University
Yokooji, Fushimiku, Kyoto 612-8235, Japan
The medium-sized experimental wave gengineer7snerator implemented at the Ujikawa Open Laboratory of Kyoto University’s Disaster Prevention Research Institute consists of a piston wave maker, a head storage tank and a current generator for reproducing long waves such as tsunamis and storm surges. The experimental series we discuss predicts the generator’s applicability in testing models. These three operating systems are controlled by a single operating system, and start time iscontrolled separately based on target tsunami and storm surge profiles. A sharp tsunami profile is reproduced when the start timing of the piston wave maker and tank gate opening is adjusted. The generator reproduces different types of tsunami wave, making it a strong tool in the research engineer’s arsenal for predicting the effectiveness of hardware “resiliency.”
-  H. T. S. Ko, D. T. Cox, H. R. Riggs, and C. J. Naito, “Hydraulic Experiments on Impact Forces from Tsunami-Driven Debris,” J. Waterway, Port, Coastal, Ocean Engineering, 04014043, pp. 1-11, 2014.
-  T. Rossetto, W. Allsop, I. Charver, and D. Robinson, “Physical Modeling of Tsunami using a New Pneumatic Wave Generator,” Coastal Engineering, Vol.58, No.6, pp. 517-527, 2011.
-  S. Takahashi et al., “Urgent survey for 2011 Great East Japan Earthquake and Tsunami disaster in ports and coasts,” Technical Note of the Port and Airport Research Institute, No.1231, 200pp., 2011.
-  T. Ijima, “Coastal Engineering,” Asakura Syoten Co ltd., pp. 63-70, 1970 (in Japanese).