Response Control of Variable Stiffness Structure Using Electromagnetic Clutch

Toshihiro Irie; Kiyoshi Shingu; Keita Kitamura; Yoshihiro Takagi

doi:10.20965/jaciii.2003.p0101

single-jc.php

« previous

JACIII Vol.7 No.2 pp. 101-107

doi: 10.20965/jaciii.2003.p0101

(2003)

Paper:

Views over last 60 days: 534

Response Control of Variable Stiffness Structure Using Electromagnetic Clutch

Toshihiro Irie^, Kiyoshi Shingu^, Keita Kitamura^*, and Yoshihiro Takagi^**

^*Nihon University, Funabashi, Chiba, 274-8501 Japan

^**Aisin AW Corporation, Takane, Fujii, Anjo, Aichi, 444-1192 Japan

Received:

February 7, 2003

Accepted:

January 1, 1970

Published:

June 20, 2003

Keywords:

response control, variable stiffness structure

Abstract

Vibration control method of a variable stiffness structure using an electromagnetic clutch is shown. The control effect is predicted by numerical simulation. On the basis of this result, an experiment is carried out using an actual apparatus to confirm the effect of the variable stiffness structure using the electromagnetic clutch.

Cite this article as:

T. Irie, K. Shingu, K. Kitamura, and Y. Takagi, “Response Control of Variable Stiffness Structure Using Electromagnetic Clutch,” J. Adv. Comput. Intell. Intell. Inform., Vol.7 No.2, pp. 101-107, 2003.

Data files:

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

Response Control of Variable Stiffness Structure Using Electromagnetic Clutch

Toshihiro Irie*, Kiyoshi Shingu*, Keita Kitamura*, and Yoshihiro Takagi**

Toshihiro Irie^, Kiyoshi Shingu^, Keita Kitamura^*, and Yoshihiro Takagi^**