In mechanical systems such as cranes and stratospheric balloon systems, the suspended load is affected by translational acceleration and wind disturbances, resulting in sway and rotation, which can pose safety risks, and reduce operational efficiency. Previous research has focused on controlling either sway or rotation individually; however, this study proposes a new method for simultaneously controlling both. In bias moment control, a high-speed rotating momentum wheel is attached to the suspended load, inducing a gyroscopic effect that alters the plane of oscillation in a manner similar to the behavior of a Foucault pendulum. This method requires minimal control input, making it possible to control both vibration and rotation simultaneously. As a result, it offers a practical solution that enables a smaller and lighter control system. The proposed method builds on previous research involving angular momentum exchange devices, such as reaction wheels and control moment gyroscopes, but is considered to offer a more compact and efficient control mechanism. In this study, the motion characteristics of the control system were analyzed in detail, and its control performance was evaluated through a combination of mathematical modeling and numerical simulation. Additionally, the relationships among parameters such as control gain, bias angular momentum, and damping performance were investigated. The results demonstrate that the proposed method is an effective approach for improving the control of suspended loads and is expected to provide practical benefits for a wide range industrial applications.

1. [1] E. M. Abdel-Rahman, A. H. Nayfeh, and Z. N. Masoud, “Dynamics and control of cranes: A review,” J. of Vibration and Control, Vol.9, Issue 5, pp. 863-908, 2003. https://doi.org/10.1177/1077546303009007007
2. [2] L. Ramli, Z. Mohamed, M. A. Abdullahi, H. I. Jaafar, and I. M. Lazim, “Control strategies for crane systems: A comprehensive review,” Mechanical Systems and Signal Processing, Vol.95, pp. 1-23, 2017. https://doi.org/10.1016/j.ymssp.2017.03.015
3. [3] C. Lee, G. Lee, S. Park, and J. Cho, “Analysis of field applicability of the rotation-controllable tower-crane hook block,” Automation in Construction, Vol.21, pp. 81-88, 2012. https://doi.org/10.1016/j.autcon.2011.05.015
4. [4] T. Ho, K. Suzuki, M. Tsume, R. Tasaki, T. Miyoshi, and K. Terashima, “A switched optimal control approach to reduce transferring time, energy consumption, and residual vibration of payload’s skew rotation in crane systems,” Control Engineering Practice, Vol.84, pp. 247-260, 2019. https://doi.org/10.1016/j.conengprac.2018.11.018
5. [5] F. A. Leve, B. J. Hamilton, and M. A. Peck, “Spacecraft Momentum Control Systems,” pp. 5-8, Springer, 2015. https://doi.org/10.1007/978-3-319-22563-0
6. [6] F. Inoue, K. Watanabe, Y. Ikeda, T. Wakisaka, A. Wakabayashi, and Y. Nekomoto, “A Practical Development of the Suspender Device that Controls Load Rotation by Gyroscopic Moments,” Proc. of the 15th Int. Symp. on Automation and Robotics in Construction, pp. 486-495, 1998. https://doi.org/10.22260/ISARC1998/0036
7. [7] T. Wakisaka, N. Furuya, Y. Inoue, and T. Shiokawa, “Automated construction system for high-rise reinforced concrete buildings,” Automation in Construction, Vol.9, Issue 3, pp. 229-250, 2000. https://doi.org/10.1016/S0926-5805(99)00039-4
8. [8] K. Chen, H. Zhou, and X. Shan, “Rotation-control device for construction cranes with nested PID control,” Automation in Construction, Vol.146, Article No.104704, 2023. https://doi.org/10.1016/j.autcon.2022.104704
9. [9] C.-J. Liang, and S.-C. Kang, “Robotic Assembly System for Steel Structures,” Modular and Offsite Construction Summit Proc., pp. 86-93, 2015.
10. [10] C.-J. Liang, S.-C. Kang, and M.-H. Lee, “RAS: A robotic assembly system for steel structure erection and assembly,” Int. J. of Intelligent Robotics and Applications, Vol.1, Issue 4, pp. 459-476, 2017. https://doi.org/10.1007/s41315-017-0030-x
11. [11] M. Wada, Y. Mori, and Y. Tagawa, “Development of a suspended-load rotation-control device for cranes with gyroscopic damper and control by wind force (concept, modeling and experiments),” Mechanical Engineering J., Vol.7, Issue 5, Article No.20-00268, 2020. https://doi.org/10.1299/mej.20-00268
12. [12] Y. Saito, I. Iijima, N. Nonaka, K. Yamada, Y. Ishikawa, M. Kanno, Y. Kishimoto, S. Gunji, T. Sato, T. Mihara, N. Anabuki, Y. Ohta, M. Yamauchi, and K. Hayashida, “Development of a simple attitude control system for newly constructed balloon-borne experiments,” Trans. of the Japan Society for Aeronautical and Space Sciences, Aerospace Technology Japan, Vol.8, Issue ists27, pp. Tm_49-Tm_53 2010. https://doi.org/10.2322/tastj.8.Tm_49
13. [13] A. Lecinski, G. Card, M. Knölker, and B. Hardy, “The design and performance of the gondola pointing system for the Sunrise II Balloon-Borne Stratospheric Solar Observatory,” Vol.6, Issue 2, Article No.1740007, 2017. https://doi.org/10.1142/S2251171717400074
14. [14] X. Ye, N. Yajima, G. Ai, and N. Hu, “Attitude control and high precision pointing control system of a large balloon borne solar telescope,” Advances in Space Research, Vol.26, Issue 9, pp. 1419-1422, 2000. https://doi.org/10.1016/S0273-1177(00)00076-4
15. [15] T. Nakano, M. Taguchi, Y. Shoji, M. Takamura, D. Sunaguchi, M. Imai, M. Watanabe, Y. Takahashi, Y. Sakamoto, and K. Yoshida, “Characteristics evaluation and performance improvement method of balloon-borne telescope pointing control system,” Trans. of the Japan Society for Aeronautical and Space Sciences, Aerospace Technology Japan, Vol.17, Issue 1, pp. 51-56, 2019. https://doi.org/0.2322/tastj.17.51
16. [16] Y. Yoshida, and M. Yajima, “Control of rotation and swing of a rigid body suspended load using inertia rotors,” Trans. of the Japan Society of Mechanical Engineers Series C, Vol.69, Issue 677, pp. 63-68, 2003 (in Japanese). https://doi.org/10.1299/kikaic.69.63
17. [17] A. Nakashima, H. Shibai, M. Kawada, T. Matsuo, M. Narita, E. Kato, T. Kanoh, T. Kohyama, Y. Matsumoto, H. Morishita, T. Watabe, K. Yamamoto, M. Tanabe, R. Kanoh, and Y. Itoh, “Far-infrared interferometric telescope experiment (FITE): Three-axis stabilized attitude control system,” Trans. of the Japan Society for Aeronautical and Space Sciences, Aerospace Technology Japan, Vol.8, Issue ists27, pp. Tm_19-Tm_24, 2010. https://doi.org/10.2322/tastj.8.Tm_19
18. [18] H. Iwago, Y. Shoji, and K. Yamada, “Attitude rate damping control of a stratospheric balloon gondola with CMGs,” Trans. of the Japan Society for Aeronautical and Space Sciences, Aerospace Technology Japan, Vol.19, Issue 2, pp. 150-159, 2021. https://doi.org/0.2322/tastj.19.150
19. [19] T. Nakano, “Vibration Control of Suspended Load System by Bias Momentum Method,” 22nd Int. Conf. on Control, Automation and Systems (ICCAS), pp. 1018-1022, 2022. https://doi.org/10.23919/ICCAS55662.2022.10003769
20. [20] Y. Yoshida, “Control of a suspended load using inertia rotors with traveling disturbance,” Proc. 2001 IEEE Int. Conf. on Robotics and Automation (ICRA), Vol.1, pp. 368-373, 2001. https://doi.org/10.1109/ROBOT.2001.932579
21. [21] N. Kodani, S. Ouchi and K. Takahashi, “Transporting and rotating control of a jib crane by control moment gyro,” 43rd Annual Conf. of the IEEE Industrial Electronics Society (IECON 2017), Vol.1, pp. 8297-8302, 2017. https://doi.org/10.1109/IECON.2017.8217456