single-au.php

IJAT Vol.14 No.2 pp. 326-335
doi: 10.20965/ijat.2020.p0326
(2020)

Paper:

Design of Lightweight Cutting Tools

Andreas Häusler, Kim Torben Werkle, Walther Maier, and Hans-Christian Möhring

Institute for Machine Tools, University of Stuttgart
17 Holzgartenstrasse, Stuttgart 70174, Germany

Corresponding author

Received:
September 20, 2019
Accepted:
January 8, 2020
Published:
March 5, 2020
Keywords:
cutting tool, topology optimization, hybrid design, lightweight, carbon fiber reinforced plastics (CFRP)
Abstract

Taking into account the growing demand for sophisticated cutting tools in terms of their performance, new approaches, besides the development of the tool’s cutting edge, have to be investigated and validated by physical tests. In this study, methods of topology optimization and hybrid design are adopted for cutting tools. After a quick overview of its motivations, reduction of mass, the design of load paths, and beneficial functions within tool bodies, a structured method and its application on a long shell end mill for metal cutting is described as part of a holistic approach at the system and component levels. The manufacturing of the resulting geometry is examined for additive manufacturing. The optimized structures reduce the spindle power required, especially for acceleration to the desired speed; this, in turn, decreases the energy consumption of the process. Besides bearing static and dynamic loads, composites provide the adjustable option in process-stabilizing damping. In the field of wood cutting, the cutting forces are lower than those in the machining of metals. Here, we describe a planing tool with a large overhang and the first step in its development. The finite element analysis within the software Ansys Workbench and CompositePrep/Post (ACP), the special tool for modeling reinforced structures, are utilized for preparing the layout of the tool. To ensure the structural integrity of fiber reinforced plastic (FRP), the failure criteria proposed by Puck are applied. The overhanging planing tool is clamped on one side. It shows the principles for the development of a prototype and forms the basis for tools with even larger diameters and benefits. The underlying concept of the planing tool prototype is an innovative sandwich concept, wherein sleeves are used to join metal with carbon fiber reinforced plastic (CFRP) in a micro-forming process. Besides the abovementioned advantages, the reduction of acoustic emissions in the very noisy field of wood machining is a promising application.

Cite this article as:
A. Häusler, K. Werkle, W. Maier, and H. Möhring, “Design of Lightweight Cutting Tools,” Int. J. Automation Technol., Vol.14 No.2, pp. 326-335, 2020.
Data files:
References
  1. [1] R. M’Saoubi, D. Axinte, S. Soo, C. Nobel, H. Attia, G. Kappmeyer, S. Engin, and W. Sim, “High performance cutting of advanced aerospace alloys and composite materials,” CIRP Annals – Manufacturing Technology, Vol.64, pp. 557-580, 2015.
  2. [2] W. Maier, H.-C. Möhring, and K. Werkle, “Tools 4.0 – Intelligence starts on the cutting edge,” Procedia Manufacturing, Vol.24, pp. 299-304, 2018.
  3. [3] H. Ueda, Y. Inoue, S. Nagagno, N. Tsukiuchi, T. Fujii, and T. Koizumi, “Study of a high damping CFRP boring bar. Japan Society of Mechanical Engineers,” NIIElectronic Library Service, 1998.
  4. [4] U. Heisel, S. Pasternak, T. Stehle, and S. Schetter, “Using alternative materials in the cutting tools applications,” Prod. Eng. Res. Devel., Vol.8, Nos.1-2, pp. 121-129, 2014.
  5. [5] U. Heisel and S. Schetter, “Entwicklung eines Reibwerkzeugs in Leichtbauweise: Faserverbundmaterialien als Konstruktionswerkstoffe erweitern Einsatzmöglichkeiten von Reibwerkzeugen,” Konstruktion, Faserverbundwerkstoffe, Werkzeuge, Wt Werkstattstechnik Online, Vol.102, Nos.1/2, pp. 56-61, 2012.
  6. [6] H.-C. Möhring, C. Brecher, E. Abele, J. Fleischer, and F. Bleicher, “Materials in machine tool structures,” CIRP Annals – Manufacturing Technology, Vol.64, No.2, pp. 725-748, 2015.
  7. [7] H.-C. Möhring, “Composites in Production Machines,” Procedia CIRP, Vol.66, pp. 2-9, 2017.
  8. [8] D. Krause, “Leichtbau,” F. Rieg et al. (Eds.), “Handbuch Konstruktion,” Carl Hanser Verlag, 2012.
  9. [9] G. Ellenrieder, T. Gänsicker, M. Goede, and H. G. Herrmann, “Die Leichtbaustrategien,” H. E. Friedrich (Eds.), “Leichtbau in der Fahrzeugtechnik,” ATZ/MTZ-Fachbuch, Springer, 2013.
  10. [10] J. Kasper and M. Vielhaber, “Cross-Component Systematic Approach for Lightweight and Material-Oriented Design,” NordDesign, 2016.
  11. [11] Michael Weinig AG, “Powermat 1500 planing machine / moulder.” https://www.weinig.com/en/solid-wood/planing-machines-and-moulders/powermat-series/powermat-1500.html [Accessed September 13, 2019]
  12. [12] Leitz GmbH & Co. KG, “Aluminum tool body, with HSK 85 WS,” http://lexicon.leitz.org/product.php?id=967837&itemid=967837&pgid=967837&chash=78ef59 [Accessed September 13, 2019]
  13. [13] Ledermann GmbH & Co. KG, “Planing Cutterheads HS,” https://www.leuco.com/leuco/cms/EN/US/leuco/Cutter_with_Bore/Planing_Cutterheads/Planing_Cutterheads_HS [Accessed September 13, 2019]
  14. [14] C. W. P. Fischbach, M. F. Zaeh, and M. Mair, “Identifying the Benefits of Fiber Reinforced Plastics for Their Use in Machine Tool Structures,” Int. J. Automation Technol., Vol.9, No.6, pp. 731-738, 2015.
  15. [15] S. W. Lee and D. G. Lee, “Torque transmission capability of composite – metal interference fit joints,” Composite Structures, Vol.78, No.4, pp. 584-595, 2007.
  16. [16] VDI 2014 Blatt 3, “Development of FRP (Fibre-Reinforced Plastics) Components – Analysis,” Verlag des Vereins Deutscher Ingenieure, 2006.
  17. [17] A. Puck, “Festigkeitsanalyse von Faser-Matrix-Laminaten,” Carl Hanser, 1996.
  18. [18] M. Knops, “Analysis of Failure in Fiber Polymer Laminates – The Theory of Alfred Puck,” Springer, 2008.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Dec. 06, 2024