IJAT Vol.13 No.1 pp. 92-100
doi: 10.20965/ijat.2019.p0092


Supporting Method for Thin Parts Having Curved Surfaces – Improvement of End Milling Accuracy by Using Low-Melting Point Alloy and Elastomer Support –

Akinori Saito*,†, Shinya Kato**, and Mitsuo Nagao*

*Nihon University
1 Nakagawara, Tokusada, Tamura, Koriyama, Fukushima 963-8642, Japan

Corresponding author

**Nihon System Eight Co., Ltd., Mito, Japan

May 25, 2018
September 14, 2018
January 5, 2019
low-rigidity parts, fixture, low-melting point alloy, elastomer, machining accuracy

Many mechanical parts have complicated and delicate shapes for improving their functionality and designability. To machine thin parts with high accuracy, it is necessary to reduce the cutting force induced on the workpiece or to clamp the workpiece optimally. Generally, cores are placed in the workpiece to fix it firmly at the production site. However, the cores must be adjusted precisely in accordance with the shape of the workpiece. A low-point melting alloy can be conveniently used instead of the cores. In this study, the influence of the supporting method for thin parts having a curved surface using a low-melting point alloy on machining accuracy is experimentally investigated. The turbine blade is selected as the experimental part. The shape is produced via end milling. The experimental results indicate that a low-melting point alloy can be closely fitted to the supporting curved surface of the turbine blade because the volume of the low-melting point alloy increases in the solidification. However, the machining accuracy is degraded when the turbine blade is deformed owing to the characteristics of the low-melting point alloy. A support method using the low-melting point alloy and an elastomer support is proposed to improve the machining accuracy. The effectiveness of the proposed method is experimentally confirmed.

Cite this article as:
A. Saito, S. Kato, and M. Nagao, “Supporting Method for Thin Parts Having Curved Surfaces – Improvement of End Milling Accuracy by Using Low-Melting Point Alloy and Elastomer Support –,” Int. J. Automation Technol., Vol.13 No.1, pp. 92-100, 2019.
Data files:
  1. [1] L. Lu, M. Sato, and H. Tanaka, “Experimental Verification of Chatter-Free Ball End Milling Strategy,” Int. J. Automation Technol., Vol.7, No.1, pp. 45-51, 2013.
  2. [2] H. Senda, “Technology for Intelligent Machine Tools and Machining Example,” J. of the Japan Society for Precision Engineering, Vol.78, No.9, pp. 748-749, 2012 (in Japanese).
  3. [3] R. J. Menassa and W. R. Devries, “Optimization methods applied to selecting support position in fixture design,” Trans. ASME. J. Eng., Ind., Vol.113, No.4, pp. 412-418, 1991.
  4. [4] I. Zaitsu, H. Aokyama, and T. Aoyama, “Fixturing Feature for Determining Optimum Clamping Points: Concept of Fixturing Feature and Its Application to 2-D Workpiece Models,” Trans. of the Japan Society of Mechanical Engineers, Series C, Vol.68, No.670, pp. 1903-1909, 2002 (in Japanese).
  5. [5] J. Kaneko and K. Horio, “Workpiece Fixture Planning Method for Continuous Multi-Axis Machining with Consideration of Motion on Translational Axis,” Int. J. Automation Technol., Vol.6, No.6, pp. 775-780, 2012.
  6. [6] S. Ratchev et al., “Milling Error Prediction and Compensation in Machining of Low-rigidity Parts,” Int. J. of Machine Tools and Manufacture, Vol.44, Issue 15, pp. 1629-1641, 2004.
  7. [7] S. P. Siebenaler and S. N. Melkote, “Prediction of Workpiece Deformation in a Fixture System Using the Finite Element Method,” Int. J. of Machine Tools and Manufacture, Vol.46, No.1, pp. 51-58, 2006.
  8. [8] J. Wang, S. Ibaraki, A. Matsubara, K. Shida, and T. Yamada, “FEM-Based Simulation for Workpiece Deformation in Thin-Wall Milling,” Int. J. Automation Technology, Vol.9, No.2, pp. 122-128, 2015.
  9. [9] K. Teramoto, “On-Machine Estimation of Workpiece Deformation for Thin-Structured Parts Machining,” Int. J. Automation Technol., Vol.11, No.6, pp. 978-983, 2017.
  10. [10] J. F. Hurtado and S. N. Melkote, “A model for synthesis of the fixturing configuration in pin-array type flexible machining fixtures,” Int. J. of Machine Tools and Manufacture, Vol.42, No.7, pp. 837-849, 2002.
  11. [11] T. Aoyama and Y. Kakinuma, “Development of Fixture Devices for Thin and Compliant Workpieces,” CIRP Annals, Vol.54, No.1, pp. 325-328, 2005.
  12. [12] K. Nakamoto, T. Iizuka, and Y. Takeuchi, “Dexterous Machining of Soft Objects by Means of Flexible Clamper,” Int. J. Automation Technol., Vol.9, No.1, pp. 83-88, 2015.
  13. [13] H.-C. Möhring and P. Wiederkehr, “Intelligent Fixtures for High Performance Machining,” Procedia CIRP, Vol.46, pp. 383-390, 2016.
  14. [14] A. Matsubara, Y. Taniyama, J. Wang, and D. Kono, “Design of a Support System with a Pivot Mechanism for Suppressing Vibrations in Thin-wall Milling,” CIRP Annals – Manufacturing, Vol.66, No.1, pp. 381-384, 2017.
  15. [15] “Directive 2011/65/Eu of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment,” Official J. of the European Union, L174, pp. 88-110, 2011.
  16. [16] S. E. Sarma and P. K. Wright, “Reference Free Part Encapsulation: Anew Universal Fixturing Concept,” J. Manufacturing. Sys., Vol.16, No.1, pp. 35-47, 1997.
  17. [17] E. Lee and S. E. Sarma, “Reference Free Part Encapsulation: Materials Machines and Methods,” J. Manufacturing. Sys., Vol.26, pp. 22-36, 2007.
  18. [18] H. Obara, T. Watanabe, T. Ohsumi, M. Hatano, and E. Ninomiya, “A Method to Machine Three-Dimensional Thin Parts,” J. of the Japan Society for Precision Engineering, Vol.69, No.3, pp. 375-379, 2003 (in Japanese).
  19. [19] I. Ushiyama, “Introduction of windmill engineering,” Morikita Publishing, p. 100, 2004 (in Japanese).
  20. [20] M. Makino, “Basic aerodynamics,” Sangyo-Tosyo, p. 106, 1989 (in Japanese).

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jun. 19, 2024