single-au.php

IJAT Vol.10 No.6 pp. 916-922
doi: 10.20965/ijat.2016.p0916
(2016)

Paper:

Properties of Photopolymer Part with Aligned Short Ferromagnetic Fibers

Takeshi Nakamoto and Sho Marukado

Department of Mechanical Engineering, Graduate School of Engineering, Chiba University
1-33 Yayoi-cho, Inage-ku, Chiba 263-8522, Japan

Corresponding author,

Received:
May 4, 2016
Accepted:
August 4, 2016
Published:
November 4, 2016
Keywords:
photopolymer, short ferromagnetic fiber, residual magnetic flux density, tensile strength, laser stereolithography
Abstract
Photopolymer parts with short ferromagnetic fibers are fabricated by laser stereolithography. A magnetic field is applied to a liquid photopolymer that contains the short ferromagnetic fibers, with the axes of the short fibers aligned in the direction of the magnetic field. Then, the photopolymer is solidified with UV laser irradiation to get the desired shape. After fabricating the part, it is magnetized by applying magnetic field to it. When the magnetic field is applied in the direction of the aligned short fibers in the fabricated part, the residual magnetic flux density of the magnetized part in the direction of the aligned fibers becomes approximately twice that in the other directions. The magnetized part can be bent by applying an external magnetic field.
Cite this article as:
T. Nakamoto and S. Marukado, “Properties of Photopolymer Part with Aligned Short Ferromagnetic Fibers,” Int. J. Automation Technol., Vol.10 No.6, pp. 916-922, 2016.
Data files:
References
  1. [1] K. Yamaguchi, T. Nakamoto, P. Abraha, Karyawan, and A. Ito, “Manufacturing of Micro Structures by Using UV Sensitive Photopolymer (3rd Report, Writing with a Focused Beam),” Trans. of the Japan Society of Mechanical Engineers, Series C, Vol.61, No.581, pp. 304-310, 1995 (in Japanese).
  2. [2] T. Nakamoto, K. Yamaguchi, P. Abraha, A. Ito, and K. Mishima, “Manufacturing of Micro Structures by Using UV Sensitive Photopolymer (4th Report, Manufacturing of 3-Dimensional Microstructures by Writing with a Focused Beam),” Trans. of the Japan Society of Mechanical Engineers, Series C, Vol.62, No.594, pp. 677-682, 1996 (in Japanese).
  3. [3] S. Maruo and K. Ikuta, “Submicron Stereolithography for the Production of Freely Movable Mechanisms by using Single-photon Polymerization,” Sensors and Actuators A, Vol.100, pp. 70-76, 2002.
  4. [4] H. Nishino, T. Miyoshi, Y. Takaya, S. Takahashi, T. Hayashi, and K. Kimura, “Study on Nonlaminate Micro-stereolithography using LCD Mask (2nd Report, Thin Layer Laminating Fabrication using LCD Live-motion Mask),” J. of the Japan Society for Precision Engineering, Vol.69, No.10, pp. 1417-1422, 2003 (in Japanese).
  5. [5] M. Saedan, “Drop-on-Demand Printer for Micro Ion-Selective Electrode Fabrication,” Int. J. of Automation Technology, Vol.5, No.5, pp. 634-638, 2011.
  6. [6] S. Yoshida, K. Sato, and S. Takeuchi, “Three-Dimensional Microassembly of Cell-Laden Microplates by in situ Gluing with Photocurable Hydrogels,” Int. J. of Automation Technology, Vol.8, No.1, pp. 95-101, 2014.
  7. [7] D. Lee, T. Miyoshi, Y. Takaya, H. Taeho, and T. Hayashi, “Study on LCD Micro Stereolithography using Ceramic Nanoparticles Reinforced Photosensitive Resin,” J. of the Japan Society for Precision Engineering, Vol.71, No.11, pp. 1415-1420, 2005 (in Japanese).
  8. [8] S. Kirihara, M. Takeda, K. Sakoda, and Y. Miyamoto, “Electromagnetic Wave Diffractions in Ceramic-/-Polymer Photonic Crystals with Three-Dimensional Diamond Structure,” J. of the Ceramic Society of Japan, Vol.111, No.7, pp. 471-478, 2003 (in Japanese).
  9. [9] T. Hayashi, Y. Takaya, and D. Lee, “LCD Microstereolithography of Photosensitive Resin with Functional Particles,” Int. J. of Automation Technology, Vol.2, No.3, pp. 182-189, 2008.
  10. [10] G. Zak, M. N. Sela, V. Vevko, C. B. Park, and B. Benhabib, “Layered Manufacturing of Fiber-Reinforced Composites,” Trans. of the ASME J. of Manufacturing Science and Engineering, Vol.121, pp. 448-456, 1999.
  11. [11] M. Haberer, G. Zak, C. B. Park, and B. Benhabib, “Design of a Slot-Coater Based Layered-Composites Manufacturing System,” Trans. of the ASME J. of Manufacturing Science and Engineering, Vol.125, pp. 564-576, 2003.
  12. [12] C. M. Cheah, J. Y. H. Fuh, A. Y. C. Nee, and L. Lu, “Mechanical Characteristics of Fiber-Filled Photo-Polymer used in Stereolithography,” Rapid Prototyping J., Vol.5, Issue 3, pp. 112-119, 1999.
  13. [13] S. Kumar, M. Hofmann, B. Steinmann, E. J. Foster, and C. Weder, “Reinforcement of Stereolithographic Resins for Rapid Prototyping with Cellulose Nanocrystals,” American Chemical Society Applied Materials & Interfaces, Vol.4, pp. 5399-5407, 2012.
  14. [14] H. Narahara, S. Takeshita, H. Fukumaru, H. Koresawa, and H. Suzuki, “Permeability Performance on Porous Structure of Injection Mold Fabricated by Metal Laser Sintering Combined with High Speed Milling,” Int. J. of Automation Technology, Vol.6, No.5, pp. 576-583, 2012.
  15. [15] H. Koresawa, H. Fukumaru, M. Kojima, J. Iwanaga, H. Narahara, and H. Suzuki, “Design Method for Inner Structure of Injection Mold Fabrication by Metal Laser Sintering,” Int. J. of Automation Technology, Vol.6, No.5, pp. 584-590, 2012.
  16. [16] T. Yoneyama, S. Abe, and M. Miyamaru, “Reducing Weld Line by Heating Mold Surface with Heater Embedded by Laser Metal Sintering,” Int. J. of Automation Technology, Vol.6, No.5, pp. 591-596, 2012.
  17. [17] T. Nakamoto and S. Kojima, “Layerd Thin Film Micro Parts Reinforced with Aligned Short Fibers in Laser Stereolithography by Applying Magnetic Field,” J. of Advanced Machanical Design, Systems, and Manufacturing, Vol.6, No.6, pp. 849-858, 2012.
  18. [18] T. Kawai and T. Kimura, “Magnetic Orientation of Isotactic Polypropylene,” Polymer, Vol.41, No.1, pp. 155-159, 2000.
  19. [19] T. Kimura, T. Kawai, and Y. Sakamoto, “Magnetic Orientation of Poly (Ethylene Terephthalate),” Polymer, Vol.41, No.2, pp. 809-812, 2000.
  20. [20] T. Kawai, R. Iijima, Y. Yamamoto, and T. Kimura, “Crystal Orientation of β–phase Isostatic Polypropylene Induced by Magnetic Orientation of N, -N’-dicyclohexyl-2, -6-naphthalenedicarboxamide,” Polymer, Vol.43, No.26, pp. 7301-7306, 2002.
  21. [21] Y. Kaneko, S. Shimada, T. Fukuda, T. Kimura, H. Yokoi, H. Matsuda, T. Onodera, H. Kasai, S. Okada, H. Oikawa, and H. Nakanishi, “A Novel Method for Fixing the Anisotropic Orientation of Dispersed Organic Nanocrystals in a Magnetic Field,” Advanced Materials, Vol.17, No.2, pp. 160-163, 2005.
  22. [22] Y. Nagai, Y. Ohtake, H. Suzuki, H. Hishida, K. Inagaki, and T. Nakamura, “Direction Estimation and Visualization of Yarns from CT Volumes of SiC Fabric,” Int. J. of Automation Technology, Vol.10, No.2, pp. 179-186, 2016.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Dec. 13, 2024