Top > IJAT > Development of Transfer System for Micropress

single-au.php

IJAT Vol.7 No.6 pp. 694-699
doi: 10.20965/ijat.2013.p0694
(2013)

Paper:

Views over last 60 days: 727

Development of Transfer System for Micropress

Ichiro Ogura*, Kiwamu Ashida*, and Tetsuo Koga**

*Advanced Manufacturing Research Institute (AMRI), National Institute of Advanced Industrial Science and Technology (AIST), 1-2-1 Namiki, Tsukuba, Ibaraki 305-8564, Japan

**Shotoku Zerotech Co. Ltd., 172 Takataro, Nishiyokata-machi, Saga, Saga 840-0036, Japan

Received:
April 1, 2013
Accepted:
September 4, 2013
Published:
November 5, 2013
Creative Commons License
Keywords:
micropress, transfer press, handling, grasp, microfactory
Abstract
A micropress system developed by the National Institute of Advanced Industrial Science and Technology (AIST), which uses microdies and strip materials, can machine submillimeter order profiles at 60 shots per minute using a series of in-line press machines. Although this system is an effective machining device for microfabrication, it is disadvantageous in terms of material consumption. In the strip material feeding system, much of the material becomes scrap, which is eventually thrown away after machining. Transfer press processing, a technique involvingmachining precut material to the product size and transferring it between press machines, is an effective method for reducing material waste. Transfer press machining has already been realized at a large scale. However, there have been few attempts to apply the transfer press to micropress machining. In this study, we developed a new microtransfer hand system for the microtransfer press. The developed transfer system can move the material in reverse or half-rotate it for value-added press machining. A test bench was developed for a transfer experiments to check the microtransfer and reverse settings. In the transfer experiments, this system achievedmicrotransfer with a success rate ofmore than 99%. A time-budget schedule was considered to improve the transfer time rate. The relationship between the grasping force of the transfer fingers and the success rate was examined as the first step in analyzing the stability and rapid transfer of work piece.
Cite this article as:
I. Ogura, K. Ashida, and T. Koga, “Development of Transfer System for Micropress,” Int. J. Automation Technol., Vol.7 No.6, pp. 694-699, 2013.
Data files:
References
  1. [1] M. Tanaka, “Development of Desktop Machining Microfactory,” RIKEN Review, No.34, pp. 46-49, Apr. 2001.
  2. [2] N. Kawahara, T. Suto, et al., “Microfactories,” Microsystem Technologies, Vol.3, No.2, pp. 37-41, 1997.
  3. [3] Y. Okazaki, N. Mishima, and K. Ashida, “Microfactory: Concept, History, and Developments,” J. Manufacturing Science and Engineering, Vol.126, No.11, pp. 837-844, 2004.
  4. [4] S.-K. Oh, H.-J. Lee, et al., “Research on the Micro Pattern Forming of Spiral Grooves in a Dynamic Thrust Bearing,” World Academy of Science, Engineering and Technology, Vol.56, pp. 622-625, 2009.
  5. [5] H.-J. Lee, J.-H. Song, et al., “Desktop Micro Forming System for Micro Pattern on the Metal Substrate,” Int. Federation for Information Processing 2010, pp. 301-308.
  6. [6] W. Presz, B. Andersen, and T. Wanheim, “Piezoelectric Driven Micro press for Microforming,” J. of Achievements in Materials and Manufacturing Engineering, Vol.18, No.1-2, pp. 411-414, 2006.
  7. [7] M. Broomfield, T. Mori, et al., “Micro Hole Multi-Point Punching System Using Punch and DieMade by EDM,” J. of SolidMechanics and Materials Engineering, Vol.3, No.4, pp. 710-720, 2009.
  8. [8] N. A. Palam, M. Arentoft, and R. S. Eriksen, “Production Equipment and Processes for Bulk Formed Micro Components,” American Institute of Physics Conf. Proc., Vol.907, pp. 463-468, 2007.
  9. [9] M. Yang, K. Manabe, and K. Ito, “Micro Press Forming and Assembling ofMicro Parts in a Progressive Die,” J. of Mechanical Science and Technology, Vol.21, pp. 1452-1455, 2007.
  10. [10] M. Arentoft, R. S. Eriksen, et al., “Towards the First Generation Micro Bulk Forming System,” CIRP Annals – Manufacturing Technology, Vol.60, pp. 335-338, 2011.
  11. [11] S. Nakano, K. Ashida, et al., “On-demand MEMS Factory System Consists of Metal Forming and Aerosol Deposition,” Proc. of the 24th Int. Japan-Korea Seminar on Ceramics, pp. 735-738.
  12. [12] A. Razali, Y. Qin, et al., “Investigation of Feeding Devices and Development of Design Considerations for a New Feeding for Micro Sheet-Forming,” The 6th Int. Conf. on Manufacturing Research, 9, 2008.
  13. [13] J. Jionghua, S. Jianjun, “Press Tonnage Signal Decomposition and Validation Analysis for Transfer or Progressive Die Processes,” J. Manufacturing Science and Engneering, Vol.127, Issue 2, pp. 231-235, 2005.
  14. [14] I. Ogura, K. Ashida, and T. Koga, “Development of micro transfer hand system for micro transfer press,” Proc. of IWMF 2012, pp. 687 1-6.

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Oct. 11, 2024