Top > IJAT > A Higher-Order Formula of Path Interval for Tool-Path Generat ...

single-au.php

IJAT Vol.5 No.5 pp. 663-668
doi: 10.20965/ijat.2011.p0663
(2011)

Paper:

Views over last 60 days: 398

A Higher-Order Formula of Path Interval for Tool-Path Generation

Toshiyuki Obikawa* and Tsutomu Sekine**

*Institute of Industrial Science, the University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505, Japan

**Department of Mechanical Engineering, College of Science and Technology, Nihon University, 1-8-14 Kanda-Surugadai, Chiyoda-ku, Tokyo 101-8308, Japan

Received:
March 16, 2011
Accepted:
July 13, 2011
Published:
September 5, 2011
Creative Commons License
Keywords:
tool-path generation, determining path intervals, computer-aided manufacturing (CAM), scallop height, surface roughness
Abstract
This paper presents a novel fourth-order formula for determining path intervals and comprehensively considers path interval formulas. In tool-path generation, a path interval is generally formulated as a scallopheight polynomial. Controlling scallop height in mechanical machining improves surface roughness or machining efficiency. We derived a novel fourth-order formula for determining path intervals after reviewing several formulas, then compared formulas. This clarified the differences between path interval formulas with graphic evidence. In micromechanical machining, an approximate expression has an advantage in computational cost but a disadvantage in accuracy. Although our proposed formula includes the fourth order-term scallop height, it requires low computational cost and can be applied to the determining path intervals for free-form surfaces in micromechanical machining. In addition, a correction method of the surface roughness on a free-form surface measured with a profilometer was proposed.
Cite this article as:
T. Obikawa and T. Sekine, “A Higher-Order Formula of Path Interval for Tool-Path Generation,” Int. J. Automation Technol., Vol.5 No.5, pp. 663-668, 2011.
Data files:
References
  1. [1] Y. Takeuchi, “Ultraprecision Micro Mechanical Machining,” Nikkan Kogyo Shinbun Ltd., 2008 (in Japanese).
  2. [2] K. Morishige, K. Kase, and Y. Takeuchi, “Tool Path Generation Using C-Space for 5-Axis Control Machining,” J. of Manufacturing Science and Engineering, Vol.121, pp. 144-149, 1999.
  3. [3] T. Nakano, N. Sugita, T. Kato, K. Fujiwara, N. Abe, T. Ozaki, M. Suzuki, and M. Mitsuishi, “Interference Free Tool Path Generation in Multi-Axis Milling Machine for Orthopedic Surgery,” Int. J. of Automation Technology, Vol.3, pp. 502-508, 2009.
  4. [4] K. Morishige and M. Kaneko, “Tool Path Generation for Five-Axis Controlled Machining with Consideration of Motion of Two Rotational Axes,” Int. J. of Automation Technology, Vol.5, pp. 412-419, 2011.
  5. [5] K. Suresh and D. C. H. Yang, “Constant Scallop Height Machining of Free-Form Surfaces,” J. of Engineering for Industry, Vol.116, pp. 253-259, 1994.
  6. [6] P. K. Wright, D. A. Dornfeld, V. Sundararajan, and D. Misra, “Tool Path Generation for Finish Machining of Freeform Surfaces in the Cybercut Process Planning Pipeline,” Trans. of the North American Manufacturing Research Institute of SME, Vol.32, pp. 159-166, 2004.
  7. [7] T. Sekine and T. Obikawa, “Normal-Unit-Vector Based Tool Path Generation Using a Modified Local Interpolation for Ball-End Milling,” J. of Advanced Mechanical Design, Systems, and Manufacturing, Vol.4, pp. 1246-1260, 2010.
  8. [8] S. G. Lee, H. C. Kim, and M. Y. Yang, “Mesh-Based Tool Path Generation for Constant Scallop-Height Machining,” Int. J. of Advanced Manufacturing Technology, Vol.37, pp. 15-22, 2008.
  9. [9] K. Shirase, K. Nakamoto, E. Arai, and T. Moriwaki, “Real-Time Five-Axis Control Based on Digital Copy Milling Concept to Achieve Autonomous Milling,” Int. J. of Automation Technology, Vol.2, pp. 418-424, 2008.
  10. [10] Y. Huang and J. H. Oliver, “Non-Constant Parameter NC Tool Path Generation of Sculptured Surfaces,” Int. J. of Advanced Manufacturing Technology, Vol.9, pp. 281-290, 1994.
  11. [11] Y. K. Choi, A. Banerjee, and J. W. Lee, “Tool Path Generation for Free Form Surfaces Using Bézier Curves/Surfaces,” Computers and Industrial Engineering, Vol.52, pp. 486-501, 2007.
  12. [12] T. Chen and Z. Shi, “A Tool Path Generation Strategy for Three-Axis Ball-End Milling of Free-Form Surfaces,” J. of Materials Processing Technology, Vol.208, pp. 259-263, 2008.

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Apr. 19, 2024