Development and Application of High Contractile Pneumatic Artificial Muscle

Daisuke Sasaki; Toshiro Noritsugu; Masahiro Takaiwa

doi:10.20965/ijat.2011.p0531

single-au.php

« previous

IJAT Vol.5 No.4 pp. 531-537

doi: 10.20965/ijat.2011.p0531

(2011)

Paper:

Views over last 60 days: 377

Development and Application of High Contractile Pneumatic Artificial Muscle

Daisuke Sasaki, Toshiro Noritsugu, and Masahiro Takaiwa

Graduate School of Natural Science of Technology, Okayama University, 3-1-1 Tsushimanaka, Kita-Ku, Okayama 700-8530, Japan

Received:

January 31, 2011

Accepted:

March 29, 2011

Published:

July 5, 2011

Keywords:

pneumatic, artificial muscle, wearable robot, power assist wear

Abstract

The purpose of this study is to develop a pneumatic artificial muscle with a high contractile rate to realize a required performance in a power assist device. The developed muscle is constructed with two nylon bands and an expansion unit. The generated force from the expansion unit is converted to a contraction force by the nylon band. This artificial muscle can be realized the high contractile rate. In this paper, the structure and the characteristics of the developed muscle are described, and then the application of this artificial muscle is discussed.

Cite this article as:

D. Sasaki, T. Noritsugu, and M. Takaiwa, “Development and Application of High Contractile Pneumatic Artificial Muscle,” Int. J. Automation Technol., Vol.5 No.4, pp. 531-537, 2011.

Data files:

References

[1] A. Chu, H. Kazerooni, and A. Zoss, “On the Biomimetic Design of the Berkeley Lower Extremity Exoskeleton (BLEEX),” Proc. of the 2005 IEEE Int. Conf. on Robotics and Automation, pp. 4356-4363, 2005.
[2] Y. Mori, K. Takayama, T. Zengo, and T. Nakamura, “Development of Straight Style Transfer Equipment for Lower Limbs Disabled: Verification of Basic Motion,” J. of Robotics and Mechatronics, Vol.16, No.5, pp. 456-463, 2004.
[3] J. Nikitczuk, B. Weinberg, and C. Mavroidis, “Rehabilitative Knee Orthosis Driven by Electro-Rheological Fluid Based Actuators,” Proc. of the 2005 IEEE Int. Conf. on Robotics and Automation, pp. 2294-2300, 2005.
[4] D. Sasaki, T. Noritsugu, and M. Takaiwa, “Development of Pneumatic Power Assist Sprint “ASSIST” Operated by Human Intention,” J. of Robotics and Mechatronics, Vol.17, No.5, pp. 568-574, 2005.
[5] H. Kobayashi, T. Siiba, and Y. Ishida, “Realization of All 7Motions for the Upper Limb by a Muscle Suit,” J. of Robotics and Mechatronics, Vol.16, No.5, pp. 504-512, 2004.
[6] B. Verrelst et al., “Second generation pleated artificial muscle and its robotic applications,” Advanced Robotics, Vol.20, No.7, pp. 783-805, 2006.

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

[1] [1] A. Chu, H. Kazerooni, and A. Zoss, “On the Biomimetic Design of the Berkeley Lower Extremity Exoskeleton (BLEEX),” Proc. of the 2005 IEEE Int. Conf. on Robotics and Automation, pp. 4356-4363, 2005.

[2] [2] Y. Mori, K. Takayama, T. Zengo, and T. Nakamura, “Development of Straight Style Transfer Equipment for Lower Limbs Disabled: Verification of Basic Motion,” J. of Robotics and Mechatronics, Vol.16, No.5, pp. 456-463, 2004.

[3] [3] J. Nikitczuk, B. Weinberg, and C. Mavroidis, “Rehabilitative Knee Orthosis Driven by Electro-Rheological Fluid Based Actuators,” Proc. of the 2005 IEEE Int. Conf. on Robotics and Automation, pp. 2294-2300, 2005.

[4] [4] D. Sasaki, T. Noritsugu, and M. Takaiwa, “Development of Pneumatic Power Assist Sprint “ASSIST” Operated by Human Intention,” J. of Robotics and Mechatronics, Vol.17, No.5, pp. 568-574, 2005.

[5] [5] H. Kobayashi, T. Siiba, and Y. Ishida, “Realization of All 7Motions for the Upper Limb by a Muscle Suit,” J. of Robotics and Mechatronics, Vol.16, No.5, pp. 504-512, 2004.

[6] [6] B. Verrelst et al., “Second generation pleated artificial muscle and its robotic applications,” Advanced Robotics, Vol.20, No.7, pp. 783-805, 2006.