IJAT Vol.3 No.5 pp. 592-601
doi: 10.20965/ijat.2009.p0592


Elementary Study on the Creation of Cross Section's Changing Holes by Means of Electrical Discharge Machining

Tohru Ishida*, Yuichi Mochizuki**, and Yoshimi Takeuchi*

*Department of Mechanical Engineering, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan

**Honda R&D Co., Ltd.

March 21, 2009
June 1, 2009
September 5, 2009
cross section’s changing hole, electrical discharge machining, reciprocating block slider crank mechanism
This study deals with the development of a new method to machine holes whose cross sections variously change along their axes. Machined holes have straight axes and constant circular cross sections, since holes are generally machined by drills. In other words, the shapes of machined holes do not have much variety. This study, however, develops a new, elementary device which can machine a certain shape on the inside wall of a straight hole by means of electrical discharge machining. This results in the creation of holes with variously changing cross sections. The aforementioned device consists of an electrode for electrical discharge machining and some mechanical parts, and is installed on a die-sinking electrical discharge machine (EDM). The device and EDM operate as a reciprocating block slider crank mechanism, so a translational movement of the main axis of the EDM can be converted into a rotational movement of the electrode. As a result, shapes which are identical to the envelope of the locus of the electrode movement can be machined. This leads to the creation of a semicircular space on the inside wall of a straight hole by starting the machining after setting the electrode in the hole. Experimental results show that, by changing the shape of the electrode, the device can produce variously shaped, semicircular spaces inside a straight hole. This proves that the new method of machining has the ability to create holes which have complicatedly changing cross sections.
Cite this article as:
T. Ishida, Y. Mochizuki, and Y. Takeuchi, “Elementary Study on the Creation of Cross Section's Changing Holes by Means of Electrical Discharge Machining,” Int. J. Automation Technol., Vol.3 No.5, pp. 592-601, 2009.
Data files:
  1. [1] M. Fukui and N. Kinoshita, “Developing a ‘mole’ electric discharge digging machining,” Annuals of the CIRP, Vol.38, No.1, pp. 203-206, 1989.
  2. [2] S. Ichiyasu, A. Takeuchi, K. Watanabe, A. Goto, and T. Magara, “Machining curved tunnels for coolant with mole EDM,” Proc. of 4th Int. Conf. on Die & Mould Technology, pp. 224-230, 1997.
  3. [3] A. Goto, K. Watanabe, and A. Takeuchi, “A method to machine a curved tunnel with EDM,” Int. Journal of Electrical Machining, No.7, pp. 43-46, 2002.
  4. [4] M. Uchiyama and T. Shibasaki, “Development of an electrochemical machining method for machining curved holes,” Proc. of 2nd Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), pp. 971-976, 2003.
  5. [5] T. Ishida and Y. Takeuchi, “L-Shaped curved hole creation by means of electrical discharge machining and an electrode curved motion generator,” Int. Journal of Advanced Manufacturing Technology, Vol.19, No.12, pp. 260-265, 2002.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jun. 19, 2024