Paper:
Views over last 60 days: 379
Study on Radiation Shielding Performance of Reinforced Concrete Wall After the Earthquake
Keiji Sekine*1 , Yoshinari Munakata*2, Osamu Kontani*3,
and Koji Oishi*4
*1Safety Technology Office, Japan Nuclear Fuel Limited, 21-4 Azumagaoka, Nishi-ku, Yokohama, Japan
*2Civil Engineering and Architectural Planning Section, Japan Nuclear Fuel Limited, 4-108 Okizuke, Obuchi, Rokkasho, Aomori 039-3212, Japan
*3Kobori Research Complex Inc., 6-5-30 Akasaka, Minato-ku, Tokyo 107-8502, Japan
*4Ohsaki Research Institute, Inc., 2-2-2 Uchisaiwai-Cho, Chiyoda-ku, Tokyo 100-0011, Japan
Received:February 26, 2010Accepted:April 27, 2010Published:August 1, 2010
Keywords:seismic disaster, reinforced concrete wall, crack width, radioactive waste, shielding performance
Abstract
The structure in which radioactive substances are stored and handled must be earthquake resistant. We will be confirming radioactive shielding performance of reinforced concrete walls when cracks occur due to large earthquakes. In this study, we performed horizontal loading experiments to evaluate shielding performance of earthquake resisting walls and constructed a safety crack model. Next, the shielding calculation was done by using the crack model, and the shielding performance of the earthquake resisting wall was evaluated. As a result, if the structure is designed according to the standards outline for nuclear power related facility, and an earthquake causes cracks in an earthquake resisting wall, it was shown that if the thickness of the earthquake resisting wall was less than 80 cm, the decrease in shielding performance was very small, and that the radiation exposure on the general public and the employee was negligible.
Cite this article as:K. Sekine, Y. Munakata, O. Kontani, and K. Oishi, “Study on Radiation Shielding Performance of Reinforced Concrete Wall After the Earthquake,” J. Disaster Res., Vol.5 No.4, pp. 361-368, 2010.Data files:
References- [1] “Technical Guidelines for Aseismic Design of Nuclear Power Plants, Supplement,” 1991.3 (in Japanese).
- [2] “Technical Guidelines for Aseismic Design of Steel Plate Reinforced Concrete Structures,” 2005 (in Japanese).
- [3] “Ultimate Strength and Deformation Capacity of Buildings in Seismic Design,” 1990 (in Japanese).
- [4] F. B. Brown et al., “MCNP: A General Monte Carlo N-Particle Transport Code, Version 5,” LA-UR-1987, Los Alamos National Laboratory, Los Alamos, N. M., 2003.62, International Handbook of Evaluated Criticality Safety Benchmark Experiments.
