Paper:
Views over last 60 days: 501
Modeling and Feedback Control for Vibratory Feeder of Electromagnetic Type
Tomoharu Doi*, Koji Yoshida**, Yutaka Tamai***, Katsuaki Kono***, Kazufumi Naito*** and Toshiro Ono****
*Osaka Prefectural College of Technology, 26-12 Saiwai-cho, Neyagawa, Osaka 572-8572, Japan
**Okayama Prefectural University, 111 Kuboki, Soja, Okayama 719-1197, Japan
***Ishida Co., Ltd. 959-1 Shimomagari, Ritto-cho, Kurita-gun, Shiga 520-3026, Japan
****Osaka Prefectural University, 1-1 Gakuen-cho, Sakai, Osaka 599-8531 Japan
Received:April 16, 1999Accepted:June 4, 1999Published:October 20, 1999
Keywords:vibration, resonance, 2-d.d.o.f PID control, mechatronics
Abstract
Modeling and Feedback Control for Electromagnetic Vibratory Feeder The electromagnetic vibratory feeder is a typical transport device used on production lines. Existing feeders are driven by feed-forward control, firing angle control of the driver cannot cancel sudden disturbances. We applied feedback control to such a feeder, proposing 2 detailed models – a dynamic model for a vibratory mechanical element useful to mechanical design and another for an electromagnetic actuating element. Taylor's expansion of these 2 models yields a linear dynamic model useful in feedback control theory. The feasibility of the model was confirmed through simulation. In a preliminary experiment, we applied PI control to the feeder because the driver is nonlinear, and results confirmed that PI control improves transport of the feeder.
Cite this article as:T. Doi, K. Yoshida, Y. Tamai, K. Kono, K. Naito, and T. Ono, “Modeling and Feedback Control for Vibratory Feeder of Electromagnetic Type,” J. Robot. Mechatron., Vol.11 No.5, pp. 367-373, 1999.Data files:
Copyright© 1999 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.
