single-mostdl.php

IJAT Most Downloaded Papers, Oct. 2022

This month Last month Vol. No. Title / Authors Keywords
1 4 Vol.11
No.1
(2017)
“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples
Klaus-Dieter Thoben, Stefan Wiesner, and Thorsten Wuest
industry 4.0, smart manufacturing, cyber-physical systems, industrial internet, smart factory
2 6 Vol.16
No.4
(2022)
Magnetic Levitation Technology for Precision Motion Systems: A Review and Future Perspectives
Lei Zhou and Jingjie Wu
magnetic levitation, mechatronics, actuators, precision motion systems, precision positioning
3 20 Vol.16
No.4
(2022)
Model Predictive Displacement Control Tuning for Tap-Water-Driven Artificial Muscle by Inverse Optimization with Adaptive Model Matching and its Contribution Analyses
Satoshi Tsuruhara, Ryo Inada, and Kazuhisa Ito
adaptive model matching, inverse optimization, model predictive control, artificial muscle, water-hydraulic
3 24 Vol.15
No.5
(2021)
Machining Performance of Robot-Type Machine Tool Consisted of Parallel and Serial Links Based on Calibration of Kinematics Parameters
Keisuke Nagao, Nobuaki Fujiki, Hiroto Tanaka, Akio Hayashi, Hidetaka Yamaoka, and Yoshitaka Morimoto
parallel mechanism, calibration, forward kinematics, articulated arm coordinate measuring machine (AACMM), robot-type machine tool (RTMT)
4 26 Vol.5
No.4
(2011)
Theoretical Comparison of McKibben-Type Artificial Muscle and Novel Straight-Fiber-Type Artificial Muscle
Hiroki Tomori and Taro Nakamura
artificial muscle, McKibben-type, straightfiber-type, dynamic characteristic model, static characteristic model
4 - Vol.4
No.5
(2010)
A Solution for 2D Rectangular Cutting Stock Problems with 3-Stage Guillotine-Cutting Constraint
Masao Sugi, Yusuke Shiomi, Tsuyoshi Okubo, Kazuyoshi Inoue, and Jun Ota
cutting stock problem(CSP), cutting process, practical constraint, 3-stage guillotine cutting, simulated annealing
4 18 Vol.13
No.3
(2019)
Review of Wire Arc Additive Manufacturing for 3D Metal Printing
Johnnie Liew Zhong Li, Mohd Rizal Alkahari, Nor Ana Binti Rosli, Rafidah Hasan, Mohd Nizam Sudin, and Faiz Redza Ramli
wire arc additive manufacturing (WAAM), 3D printing, additive manufacturing (AM), welding, fused deposition modeling (FDM)
4 24 Vol.14
No.6
(2020)
Defining Requirements on Technology Systems Assessment from Life Cycle Perspectives: Cases on Recycling of Photovoltaic and Secondary Batteries
Yasunori Kikuchi, Aya Heiho, Yi Dou, Izuru Suwa, I-Ching Chen, Yasuhiro Fukushima, and Chiharu Tokoro
bibliometric analysis, requirement definition, life cycle assessment
5 16 Vol.16
No.2
(2022)
Airframe Design Optimization and Simulation of a Flying Car for Medical Emergencies
Yusuke Mihara, Tsubasa Nakamura, Aki Nakamoto, and Masaru Nakano
flying car, eVTOL, system design, sustainability, medical emergency
5 13 Vol.16
No.5
(2022)
Statistics-Based Measuring Point Selection for Monitoring the Thermal Deformation of a Workpiece in End-Milling
Mengmeng Yang, Feng Zhang, and Koji Teramoto
thermal deformation, temperature measuring system, multiple linear regression (MLR), statistics-based selection method, end-milling
5 24 Vol.11
No.4
(2017)
Chain of Command: A Sustainable Supply Chain Management Serious Game
Victor Cuesta and Masaru Nakano
serious games, sustainable supply chain management, green and lean production, risk management
5 20 Vol.6
No.2
(2012)
Indirect Measurement of Volumetric Accuracy for Three-Axis and Five-Axis Machine Tools: A Review
Soichi Ibaraki and Wolfgang Knapp
volumetric accuracy, indirect measurement, machine tools, kinematic model
6 22 Vol.16
No.4
(2022)
Design and Fabrication of Micro Gripper Using Functional Fluid Power
Yutaka Tanaka, Ryuta Suzuki, Kazuya Edamura, and Shinichi Yokota
electro-conjugate fluid, functional fluid, jamming gripper, micro gripper, soft actuator
7 - Vol.15
No.3
(2021)
Research on Identification of Road Features from Point Cloud Data Using Deep Learning
Yoshimasa Umehara, Yoshinori Tsukada, Kenji Nakamura, Shigenori Tanaka, and Koki Nakahata
i-Construction, road feature, point cloud data, deep learning, feature identification
7 26 Vol.8
No.5
(2014)
In the Loop – Sustainable, Circular Product Design and Critical Materials
Katherine Whalen and David Peck
gaming, product design, scarce materials, rare earth elements, circular economy
7 15 Vol.16
No.5
(2022)
A Compound Control Algorithm for Height Following of Laser Cutting Head
Wu Da, Zeng Chunnian, Luo Jie, Yan Shu, Chen Lei, and Jinmin Hu
laser cutting, height following control, fuzzy PID control, acceleration closed-loop control
7 24 Vol.16
No.4
(2022)
Posture Evaluation Based on Forward Kinematics and Inverse Kinematics of Parallel Link Type Machine Tool
Hiroto Tanaka, Yoshitaka Morimoto, Akio Hayashi, and Hidetaka Yamaoka
parallel mechanism, shape creation theory, homogeneous transformation matrix, kinematics
7 26 Vol.14
No.3
(2020)
Solution of the Rectangular Strip Packing Problem Considering a 3-Stage Guillotine Cutting Constraint with Finite Slitter Blades
Masao Sugi, Yusuke Shiomi, Tsuyoshi Okubo, Hidetoshi Nagai, Kazuyoshi Inoue, and Jun Ota
rectangular strip packing problem (RSPP), cutting stock problem (CSP), cutting constraints, guillotine cutting, column generation
8 22 Vol.16
No.4
(2022)
Control of Spindle Position and Stiffness of Aerostatic-Bearing-Type Air Turbine Spindle
Tomohiro Tanaka, Tomonori Kato, Tatsuki Otsubo, Atsuhiro Koyama, and Takanori Yazawa
pneumatics, air turbine spindle, aerostatic bearing, position and stiffness control
8 23 Vol.13
No.4
(2019)
Influencing Factors on Rotate Vector Reducer Dynamic Transmission Error
Shou-Song Jin, Xiao-Tao Tong, and Ya-Liang Wang
RV reducer, dynamic transmission error, virtual prototyping, ANSYS, ADAMS
8 27 Vol.11
No.5
(2017)
Development of Removal Amount Estimation Method Based on Calculation of Elastic Deformation of Superabrasive Stones During Multistage Superfinishing of Sapphire
Naomichi Furushiro, Tomomi Yamaguchi, Daisuke Hirooka, Masashi Yamaguchi, Noboru Matsumori, and Kenichi Tanada
superfinishing, sapphire, vitrified-bonded diamond superabrasive stone, elastic deformation, real contact pressure
8 16 Vol.16
No.3
(2022)
Digital Tools Integration and Human Resources Development for Smart Factories
Hiroyuki Sawada, Yoshihiro Nakabo, Yoshiyuki Furukawa, Noriaki Ando, Takashi Okuma, Hitoshi Komoto, and Keijiro Masui
smart manufacturing, robot system, human behavior sensing, human-machine coexistence, model factory
9 - Vol.5
No.2
(2011)
The Simulation and Inspection for the Starting Phenomenon of Slit Coating Process on Glass Substrate
Ta-Hsin Chou, Wen-Hsien Yang, Kuei-Yuan Cheng, Yu-Chen Chang, and Thomas Luo
CFD, slit nozzle, patch coating, glass
9 22 Vol.16
No.4
(2022)
Food Texture Measurement System Using Rod Type Actuator for Imitation of Human Mastication
Hiroyuki Nakamoto, Yuya Nagahata, and Futoshi Kobayashi
food texture, texture measurement, rod-type actuator, mastication, food evaluation
9 25 Vol.14
No.6
(2020)
Durability Evaluation of an Additive Manufactured Biodegradable Composite with Continuous Natural Fiber in Various Conditions Reproducing Usage Environment
Yuta Yaguchi, Kenji Takeuchi, Tadashi Waragai, and Toshitake Tateno
additive manufacturing, biodegradable material, biodegradable composite
9 25 Vol.14
No.3
(2020)
Identification Method of Error Motions and Geometric Errors of a Rotary Axis by R-Test
Takaaki Kenno, Ryuta Sato, Keiichi Shirase, Shigemasa Natsume, and Henny Spaan
five-axis machine tools, rotary axis, error motion, geometric error, R-test
9 18 Vol.16
No.5
(2022)
Motion Analysis of Lathe Machining Work Using a Digital Position Display Device
Seiko Taki and Shohei Yonezawa
ocular movement, motion analysis, lathe operation, skill transfer, case study
9 27 Vol.12
No.4
(2018)
Development of Fluffy Screen System and Field Trial at a Shopping Mall
Yusuke Tamura, Soichiro Morishita, and Hajime Asama
interactive digital signage, touchscreen, attraction affordance
9 - Vol.12
No.2
(2018)
Next-Generation, Super-Hard-to-Process Substrates and Their High-Efficiency Machining Process Technologies Used to Create Innovative Devices
Toshiro Doi
SiC, GaN and diamond substrates, dilatancy pad, high pressure & rotational polishing machine, plasma fusion CMP, singularity
9 21 Vol.16
No.3
(2022)
Identification of a Practical Digital Twin for Simulation of Machine Tools
Tomoya Fujita, Tiandong Xi, Ryosuke Ikeda, Sebastian Kehne, Marcel Fey, and Christian Brecher
machine tools, feed drive, digital twin, simulation, identification
9 - Vol.12
No.6
(2018)
Strategies for the Leftover Food Treatment Process: A Case Study of Convenience Store Deli-Style Food Products in Taiwan
Jui-Che Tu and Yi-Lin Lee
food waste, Taiwan society research, convenience stores, lifestyle
10 - Vol.13
No.3
(2019)
Development of Path Generation Method for Five-Axis 3D Printer
Hikaru Nishikawa, Yoshitaka Morimoto, and Akio Hayashi
additive manufacturing, 3D printer, five-axis position control
10 25 Vol.14
No.6
(2020)
Decision Support Method for Upgrade Cycle Planning and Product Architecture Design of an Upgradable Product
Shuho Yamada, Shogo Miyajima, Tetsuo Yamada, Stefan Bracke, and Masato Inoue
product architecture, upgradable product, upgrade planning, upgradable product design, customer dissatisfaction
10 - Vol.13
No.2
(2019)
Surface Finishing of Single-Crystal SiC and GaN Wafers Using a Magnetic Tool in H2O2 Solution
Akihisa Kubota
SiC, GaN, surface smoothing, OH radical, abrasive Fe
10 23 Vol.3
No.6
(2009)
Upper-Limb Power-Assist Control for Agriculture Load Lifting
Eiichi Yagi, Daisuke Harada, and Masaaki Kobayashi
power assist system, wearable robot system, exoskeleton, pneumatic actuator, emg, elbow motion, shoulder motion, farming, lift-up motion
10 - Vol.6
No.2
(2012)
Estimation of Dynamic Mechanical Error for Evaluation of Machine Tool Structures
Daisuke Kono, Sascha Weikert, Atsushi Matsubara, and Kazuo Yamazaki
machine tool structures, estimation method, dynamic mechanical error, finite element analysis, rigid multi-body simulation
10 - Vol.6
No.4
(2012)
Flow Analysis in Pipe of a Manifold Block
Osamu Abe, Tetsuhiro Tsukiji, Takeshi Hara, and Kazutoshi Yasunaga
manifold block, pipe flow, CFD, pressure drop, cavitation
10 14 Vol.16
No.5
(2022)
Investigation of Air Filter Properties of Flash-Spinning Nanofiber Non-Woven Fabric
Shih-Pang Tsai, Wei Wu, Hiroyoshi Sota, Toshiki Hirogaki, and Eiichi Aoyama
melt blowing method, flash spinning method, nanofiber, filter, CFD analysis
10 21 Vol.16
No.3
(2022)
Improved Synchronous Motion of Linear and Rotary Axes While Avoiding Torque Saturation Under a Constant Feed Speed Vector at the Endmilling Point – Investigation of Motion Error Under Numerical Control Commanded Motion –
Takamaru Suzuki, Kazuki Yoshikawa, Toshiki Hirogaki, Eiichi Aoyama, and Takakazu Ikegami
five-axis machining center, synchronous motion, machined shape error, servo, torque saturation
10 27 Vol.11
No.3
(2017)
Three-Fingered Gripper with Flexure Hinges Actuated by Shape Memory Alloy Wires
Daniela Maffiodo and Terenziano Raparelli
shape memory alloy, gripper, flexure hinges
10 - Vol.7
No.4
(2013)
Fast Cutter Workpiece Engagement Estimation Method for Prediction of Instantaneous Cutting Force in Continuous Multi-Axis Controlled Machining
Jun’ichi Kaneko and Kenichiro Horio
multi-axis controlled machining, instantaneous cutting force, engagement, estimation, GPGPU
10 25 Vol.7
No.4
(2013)
Modeling the Process of Animation Production
Hisato Nakanishi, Naohiro Shichijo, Masao Sugi, Taiki Ogata, Tatsunori Hara, and Jun Ota
animation production, scheduling, job analysis
10 18 Vol.16
No.5
(2022)
Design and Testing of a Compact Optical Angle Sensor for Pitch Deviation Measurement of a Scale Grating with a Small Angle of Diffraction
Lue Quan, Yuki Shimizu, Ryo Sato, Dong Wook Shin, Hiraku Matsukuma, Andreas Archenti, and Wei Gao
diffraction grating, optical head, laser autocollimation, pitch deviation
10 25 Vol.11
No.4
(2017)
Life Cycle Analysis of Emissions from Electric and Gasoline Vehicles in Different Regions
Kamila Romejko and Masaru Nakano
production, electric vehicles, life cycle analysis, health issues, emissions

Count period : October 1-31, 2022

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Feb. 08, 2023