single-mostdl.php

IJAT Most Downloaded Papers, Aug. 2018

This month Last month Vol. No. Title / Authors Keywords
No.1 1 Vol.11
No.1
(2017)
“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples
Klaus-Dieter Thoben, Stefan Wiesner, and Thorsten Wuest
industry 4.0, smart manufacturing, cyber-physical systems, industrial internet, smart factory
No.2 11 Vol.5
No.4
(2011)
Quantitative Performance Analysis of Exoskeleton Augmenting Devices - Muscle Suit - for Manual Worker
Yoshiki Muramatsu, Hiroyuki Kobayashi, Yutaka Sato, He Jiaou, Takuya Hashimoto, and Hiroshi Kobayashi
muscle suit, wearable robot, exoskeleton, McKibben artificial muscle, quantitative performance evaluation
No.2 - Vol.6
No.5
(2012)
Low-Cost 3D Printing of Controlled Porosity Ceramic Parts
Olaf Diegel, Andrew Withell, Deon de Beer, Johan Potgieter, and Frazer Noble
3D printing, ceramic, clay, controlled porosity
No.3 5 Vol.12
No.3
(2018)
Artificial Neural Networks for Tool Wear Prediction Based on Sensor Fusion Monitoring of CFRP/CFRP Stack Drilling
Alessandra Caggiano and Luigi Nele
drilling, composite material, sensor monitoring, artificial neural network, tool wear prediction
No.3 10 Vol.7
No.1
(2013)
A Determination Method of Cutting Coefficients in Ball End Milling Forces Model
Hirohisa Narita
ball end mill, cutting force, cutting coefficients
No.3 10 Vol.5
No.4
(2011)
Theoretical Comparison of McKibben-Type Artificial Muscle and Novel Straight-Fiber-Type Artificial Muscle
Hiroki Tomori and Taro Nakamura
artificial muscle, McKibben-type, straightfiber-type, dynamic characteristic model, static characteristic model
No.3 10 Vol.6
No.2
(2012)
Indirect Measurement of Volumetric Accuracy for Three-Axis and Five-Axis Machine Tools: A Review
Soichi Ibaraki and Wolfgang Knapp
volumetric accuracy, indirect measurement, machine tools, kinematic model
No.4 5 Vol.12
No.4
(2018)
Skill Extraction from Nursing Care Service Using Sliding Sheet
Qi An, Junki Nakagawa, Junko Yasuda, Wen Wen, Hiroshi Yamakawa, Atsushi Yamashita, and Hajime Asama
nursing care service, skill extraction, optimization
No.4 11 Vol.12
No.3
(2018)
Basic Study on Remelting Process to Enhance Density of Inconel 625 in Direct Energy Deposition
Ryo Koike, Taro Misawa, Yasuhiro Kakinuma, and Yohei Oda
direct energy deposition, pore, remelting, Inconel 625, fiber laser
No.4 - Vol.10
No.4
(2016)
Development of a Rubber Soft Actuator Driven with Gas/Liquid Phase Change
Hiroki Matsuoka, Takefumi Kanda, Shuichi Wakimoto, Koichi Suzumori and Pierre Lambert
actuator, gas/liquid phase change, silicone rubber, gripper
No.4 - Vol.9
No.4
(2015)
Advanced Control Strategies for Active Vibration Suppression in Laser Cutting Machines
Berend Denkena, Martin Eckl, and Thomas Lepper
hybrid positioning, laser cutting, vibration control, vibration compensation, Kalman filter
No.4 - Vol.8
No.1
(2014)
In-Process and On-Machine Measurement of Machining Accuracy for Process and Product Quality Management: A Review
Yasuhiro Takaya
in-process measurement, on-machine measurement, manufacturing metrology, machine tools, quality management
No.4 - Vol.11
No.5
(2017)
Three-Dimensional Reconstruction by Time-Domain Optical Coherence Tomography Microscope with Improved Measurement Range
Shin Usuki, Katsuaki Tamaki, and Kenjiro T. Miura
three-dimensional reconstruction, three-dimensional measurement, optical coherence tomography, optical microscopy
No.4 - Vol.10
No.6
(2016)
Minimizing Burrs and Defects on Microstructures with Laser Assisted Micromachining Technology
Shaolin Xu, Shinsaku Osawa, Ryuichi Kobayashi, Keita Shimada, Masayoshi Mizutani, and Tsunemoto Kuriyagawa
laser assisted micromachining, burrs and defects, microstructures, electroless NiP plating
No.4 11 Vol.11
No.1
(2017)
Tool Wear and Surface Roughness in Milling of Die Steel Using Binderless CBN End Mill
Kazuya Hamaguchi, Hiroyuki Kodama, and Koichi Okuda
binderless CBN end mill, tool wear, surface roughness, mirror finishing, die steel
No.4 9 Vol.12
No.2
(2018)
Study of Femtosecond Laser Ablation Effect on Micro-Processing for 4H-SiC Substrate
Chengwu Wang, Syuhei Kurokawa, Julong Yuan, Li Fan, Huizong Lu, Zhe Wu, Weifeng Yao, Kehua Zhang, Yu Zhang, and Toshiro Doi
4H-SiC, femtosecond (fs) laser, surface morphology, pseudo-radical site, precision processing
No.4 10 Vol.12
No.1
(2018)
Development and Evaluation of New Material Measure with Chirp Form for Surface Texture Instruments
Ichiro Yoshida, Yuichi Okazaki, Noriyuki Kato, Nobuyuki Tanaka, and Kozo Miyamoto
material measure, measurement standard, surface texture, chirp form, Gaussian filter
No.4 11 Vol.8
No.1
(2014)
Development of On-Machine Measurement Unit for Correction Processing of Aspheric Lens Mold with High Numerical Aperture
Tomohiro Hirose, Yoshihiro Kami, Tatsuhito Shimizu, Makoto Yabuya, and Yoshitaka Morimoto
ultra-precision machine tool, lens mold, onmachine measurement unit, pick-up lens, high numerical aperture, correction processing
No.4 - Vol.8
No.5
(2014)
In the Loop – Sustainable, Circular Product Design and Critical Materials
Katherine Whalen and David Peck
gaming, product design, scarce materials, rare earth elements, circular economy

Count period : August 1 - 31, 2018

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Dec. 02, 2024