Top > Most Downloaded > IJAT Most Downloaded Papers, July 2016

single-mostdl.php

IJAT Most Downloaded Papers, July 2016

This month Last month Vol. No. Title / Authors Keywords
No.1 - Vol.3
No.6
(2009)		 Muscle Suit Development and Factory Application
Hiroshi Kobayashi, Takamitsu Aida, and Takuya Hashimoto 		wearable robot, power assist, McKibben artificial muscle, work-related disorder, muscle suit
No.1 - Vol.7
No.2
(2013)		 Design of Wearable Power Assist Wear for Low Back Support Using Pneumatic Actuators
Xiangpan Li, Toshiro Noritsugu, Masahiro Takaiwa, and Daisuke Sasaki 		power assist wear, low back, pneumatic rubber artificial muscle, IMU, iEMG
No.1 - Vol.10
No.4
(2016)		 Development of a Rubber Soft Actuator Driven with Gas/Liquid Phase Change
Hiroki Matsuoka, Takefumi Kanda, Shuichi Wakimoto, Koichi Suzumori and Pierre Lambert 		actuator, gas/liquid phase change, silicone rubber, gripper
No.2 - Vol.1
No.2
(2007)		 High Performance Motion Control of Rotary Table for 5-Axis Machining Centers
Ryuta Sato and Masaomi Tsutsumi 		5-axis machining center, rotary table, motion control, worm gear, synchronous accuracy
No.2 - Vol.2
No.3
(2008)		 Fabrication of Cooling Channels in the Injection Molding by Laser Metal Sintering
Takeshi Yoneyama and Hiroyuki Kagawa 		laser metal sintering, cooling channel, injection mold, rapid prototype
No.2 - Vol.6
No.6
(2012)		 Workpiece Fixture Planning Method for Continuous Multi-Axis Machining with Consideration of Motion on Translational Axis
Jun’ichi Kaneko and Kenichiro Horio 		CAPP, multi-axis control machining, fixture condition, parallel processing, GPGPU
No.2 - Vol.8
No.3
(2014)		 Review of Computer-Aided Process Planning Systems for Machining Operation – Future Development of a Computer-Aided Process Planning System –
Mohammad Mi’radj Isnaini and Keiichi Shirase 		machining operation, metal removal process, CAPP, CAD, CAM
No.2 - Vol.10
No.2
(2016)		 Development of Cutting Force Prediction Method Using Motion Information from CNC Controller
Tomoya Hida, Tetsuya Asano, Chiharu Higashino, Masaaki Kanamaru, Jun’ichi Kaneko, and Yoshimi Takeuchi 		cutting force, prediction, CNC, NC data, motion error
No.2 - Vol.10
No.4
(2016)		 Characteristics of a Pneumatic Bellows Actuator for Colonoscopy
Shuichi Wakimoto and Hidehiro Kametani 		pneumatic actuator, colonoscope insertion assist device, film actuator
No.2 - Vol.10
No.4
(2016)		 Omnidirectional Soft Robot Platform with Flexible Actuators for Medical Assistive Device
Mohamed Najib Ribuan, Shuichi Wakimoto, Koichi Suzumori, and Takefumi Kanda 		flexible actuator, soft robot, pneumatic pillow, medical assistive device, X-ray examination, and fluoroscopy
No.2 - Vol.10
No.4
(2016)		 Development of a Hose-Free FMA Driven by a Built-In Gas/Liquid Chemical Reactor
Akira Wada, Hidehiro Kametani, Koichi Suzumori, and Shuichi Wakimoto 		actuator, pneumatic actuator, hose-free pneumatic actuator
No.2 - Vol.10
No.4
(2016)		 Development of Novel Particle Excitation Flow Control Valve for Stable Flow Characteristics
Daisuke Hirooka, Tomomi Yamaguchi, Naomichi Furushiro, Koichi Suzumori, and Takefumi Kanda 		pneumatic actuator, flow control valve, PZT, transducer
No.2 - Vol.10
No.4
(2016)		 Fabrication and Control of Fine Periodic Surface Structures by Short Pulsed Laser
Shuhei Kodama, Akihiro Shibata, Shinya Suzuki, Keita Shimada, Masayoshi Mizutani, and Tsunemoto Kuriyagawa 		short-pulsed laser, collisional relaxation time, effective fluence range, temperature, laser wavelength

Count period : July 1-31, 2016

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Apr. 22, 2024