single-mostdl.php

IJAT Most Downloaded Papers, September 2015

This month Last month Vol. No. Title / Authors Keywords
No.1 - Vol.7
No.6
(2013)
Fabrication of Titanium-Based Hard Coatings by Atmospheric Microplasma-Metal Organic Chemical Vapor Deposition Using Titanium Tetraisopropoxide
Tsunehisa Suzuki, Mutsuto Kato, and Yoshiki Shimizu
titanium-based hard coatings, atmospheric microplasma, MOCVD, titanium (IV) tetraisopropoxide
No.1 - Vol.3
No.2
(2009)
Polishing Process Automation by Industrial Robots with Polished Surface Quality Judged Based on Imaging Processing
Tomoya Ito and Koichi Morishige
polishing, automation, industrial robot, image processing
No.1 - Vol.9
No.1
(2015)
Improving the Properties of Injection Molded Products with Induction Heating and Cooling Molds
Yasuhiko Murata, Masayoshi Koike, and Song Pan
polymer, injection molding, induction heating and cooling mold, gas vent, weld line
No.1 - Vol.9
No.1
(2015)
Development and Control of a Low-Cost, Three-Thruster, Remotely Operated Underwater Vehicle
Khoa Duy Le, Hung Duc Nguyen, and Dev Ranmuthugala
remotely operated vehicle (ROV), hybrid controller, model-based control, PID control, open source hardware
No.1 - Vol.9
No.5
(2015)
Determination of Aspect Ratio Limitations, Accuracy and Repeatability of a Laser Line Scanning CMM Probe
Bart Boeckmans, Min Zhang, Frank Welkenhuyzen, and Jean-Pierre Kruth
dimensional metrology, CMM, laser line scanning, accuracy, repeatability
No.1 - Vol.9
No.5
(2015)
Calibrator for 2D Grid Plate Using Imaging Coordinate Measuring Machine with Laser Interferometers
Mariko Kajima, Tsukasa Watanabe, Makoto Abe, and Toshiyuki Takatsuji
grid plate, imaging coordinate measuring machine, laser interferometer
No.1 - Vol.9
No.5
(2015)
Calibration Using Cylindrical Artifacts for 3D Laser Measurement System
Kazuhiro Enami
3D measurement, calibration, artifact calibration
No.1 - Vol.9
No.5
(2015)
High-Speed Measurement of Complex Shaped Parts at Elevated Temperature by Laser Triangulation
Alexander Schöch, Alessandro Salvadori, Ivo Germann, Silvano Balemi, Carlo Bach, Andrea Ghiotti, Simone Carmignato, Andrea Lelio Maurizio, and Enrico Savio
complex shape, online measurement, hot forged products, light-sectioning, 3D-measurement

Count period : September 1-30, 2015

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jul. 20, 2021