Development of the Robust Positioning System in Weather Disturbance Based on Geometric Landmark
Satoshi Ashizawa, Shunichi Tsuzuki, Takeshi Sakurai,
Michio Yamashita, Tomoya Owaki, and Takeo Oomichi
Department of Mechanical Engineering, Meijo University, 1-501 Shiogamaguchi, Tenpaku-ku, Nagoyashi, Aichi 468-8502, Japan
-  S. Ozawa and A. Rosenfeld, “SYNTHESIS OF A ROAD IMAGE AS SEEN FROM A VEHICLE,” Pattern Recognition, Vol.19, No.2, pp. 123-145, 1986.
-  A. D. Morgan, E. L. Dagless, D. J. Milford, and B. T. Thomas, “Road edge tracking for robot road following: A real-time implementation,” Image Vis Comput, Vol.8, No.3, pp. 233-240, 1990.
-  S.-Y. Lee and H.-W. Yang, “Navigation of automated guided vehicles using magnet spot guidance method,” Robotics and Computer-Integrated Manufacturing, Vol.28, No.3, pp. 425-436, 2012.
-  Y. K. Tham, H. Wang, and E. K. Teoh, “Multi-sensor fusion for steerable four-wheeled industrial vehicles,” Control Engineering Practice, Vol.7, pp. 1233-1248,1999.
-  M. Iwata, H. Takahashi, K. Sasaki, and M. Takano, “Positioning System for Mobile Robot using LED Marks,” The Japan Society for Precision Engineering, Vol.61, No.11, pp. 1579-1583, 1995.
-  S. Hijikata and K. Umeda, “Self-localization of a mobile robot using infrared LEDs,” Trans. of the JSME Robotics and Mechatronics Division, 1A1-S-040, 2005.
-  W. Mizunuma, K. Okabe, S. Abe, A. Shinozaki, and H. Hashimoto, “Development of High-Speed Automated Guided Vehicle (AGV) for Heavy Load,” Mitsubishi Heavy Industries Technical Review, Vol.36, No.4, 1999.
-  J. Široký, “Automatic Transhipment Systems for Container Transport in Terminals,” Perner’s Contacts, Vol.6, No.3, pp. 145-154, 2011.
-  S. Tsugawa, S. Kato, and K. Aoki, “An Automated Truck Platoon for Energy Saving,” 2011 IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, 2011.
-  Y. Kuromiya, S. Ashizawa, D. Ando, and T. Oomichi, “Development of the Real-Time Position Detection Sensor for the Small Projected Objects” J. of Robotics and Mechatronics, Vol.24, No.1, pp. 244-253, 2012.
-  H. Isobe, M. Wakita, and T. Oomichi, “Reset position by wide range mark of Omni-directional Robot2nd Report,” The 25nd Annual Conf. of The Robotics Society of Japan, CDR 1K11, 2007.
-  T. Oomichi, T. Nagai, K.Mori, Y. Adachi, and T. Teshima, “System Architecture for High Reliability Module Mobile Robot,” Trans. of The Society of Instrument and Control Engineers, Vol.43, No.8, pp. 689-698, 2007.
-  T. Izuchi, M. Hotta, T. Oomichi, S. Seki, and J. Koyama, “Development of Network Plug-in Actuator,” J. of Robotics and Mechatronics, Vol.19, No.2, pp. 232-242, 2007.
This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.
Copyright© 2013 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.