Views over last 60 days: 2,990
Robot Hand with Fingers Using Vibration-Type Ultrasonic Motors (Driving Characteristics)
Kenji Nishibori*, Setsuya Kondo*, Hirohisa Obata**, and Shigeru Okuma***
*Dept. of Mechanical System Engineering, Daido Institute of Technology, Minami-ku, Nagoya 457-8530, Japan
**Asian Industry Co. Ltd., Kyowa-cho, Obu, Aichi 474-8588, Japan
***Dept. of Information Electronics, Nagoya University, Chikusa-ku Nagoya 464-8603, Japan
Received:May 30, 2003Accepted:November 17, 2003Published:December 20, 2003
Keywords:ultrasonic motor, robot hand, actuator piezo-element, ultrasonic vibrator
An ultrasonic motor is a promising actuator for robots since it has simple construction, high response, and high torque at low speed. This paper proposes a robot hand using vibrational ultrasonic motors, instead of moving elements, as fingers. This robot hand with three fingers can simultaneously grasp and rotate a cylindrical body. The driving characteristics of the robot hand were examined experimentally under various conditions. It was confirmed that high torque was obtained when the optimum contact angle and contact force of the ultrasonic motors were used. The reduction of output torque is small even when the diameter of the rotational body deviates from the design value.
Cite this article as:K. Nishibori, S. Kondo, H. Obata, and S. Okuma, “Robot Hand with Fingers Using Vibration-Type Ultrasonic Motors (Driving Characteristics),” J. Robot. Mechatron., Vol.15 No.6, pp. 588-595, 2003.Data files:
Copyright© 2003 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.