Paper:
Views over last 60 days: 336
Development of Joints for Power Microrobot for Searching inside Debris
Koichi Suzumori, Masanori Takata, and Shuichi Wakimoto
Department of System Engineering, Okayama University, 3-1-1 Tsushima-naka, Okayama, 700-8530 Japan
Received:March 31, 2003Accepted:June 9, 2003Published:October 20, 2003
Keywords:rescue robot, hydraulic robot, hydraulic actuator, microrobot
Abstract
Searching for victims in narrow gaps and shoring up pieces of debris to secure space are tasks encountered in disaster rescue operations. The authors have developed high-strength robot joints for microrobots to be used in such situations. The joints developed are of three types - swivel joint, extension joint, and strut joint - all having an outer diameter of 60mm and driven by a 21MPa hydraulic system. This paper presents the system configuration of a power microrobot for traveling and searching inside debris, then describes the mechanisms and controls of the three developed joints. This study thereby demonstrates the possibility of realizing a microrobot capable of maneuvering within narrow gaps and shoring debris to secure space. The microrobot weighs approximately 25 or 35kg (including the hydraulic unit), is driven by a 100V power supply, with 300W power consumption, and has an outer diameter of 60mm and length of about 1m.
Cite this article as:K. Suzumori, M. Takata, and S. Wakimoto, “Development of Joints for Power Microrobot for Searching inside Debris,” J. Robot. Mechatron., Vol.15 No.5, pp. 555-560, 2003.Data files:
Copyright© 2003 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.
