A Study of Active Cord Mechanisms -Basic Design of Pneumatically Driven Active Cord Mechanism-
Hidetaka Ohno and Shigeru Hirose
Tokyo Institute of Technology, 2-12-1 O-okayama, Meguro-Ku, Tokyo
This paper describes mobile robotic systems known as Active Cord Mechanisms (ACMs). The systems have articulated bodies composed of serially connected units that can actively bend and stretch. One such example of a mobile ACM is the Slim Slime-I. It is composed of a series of interconnected pneumatic 3D modules. The 3D module is thus termed because of its three degrees of freedom: pitch, yaw and stretch. Furthermore, each module contains a variety of features: an air pressure distribution mechanism to reduce the amount of tubes contained, a pneumatic drive system with a pair of solenoid valves to save energy, a bellows drive system with buckling prevention, a shell mechanism with a displacement limit, and a photo sensor to record displacement and generate a restoring force.
This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.
Copyright© 2003 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.